MACOM DS52-0005-TR, DS52-0005-RTR, DS52-0005 Datasheet

Low Cost Two-Way SMT Power Divider
1700 - 1900 MHz

DS52-0005

Features

• Small Size and Low Profile

• Industry Standard SOIC-8 SMT Plastic Package

• Superior Repeatability

• Excellent Amplitude Balance: 0.05 dB Typical

• Excellent Insertion Loss: 0.3 dB Typical

• Low Cost

• DCS-1800 Frequency Coverage

Description

M/A-COM’s DS52-0005 is an IC-based monolithic power divider
in a low cost SOIC-8 plastic package. This 2-way power splitter is
ideally suited for applications where small size, low profile and
low cost, without sacrificing performance are required. Typical
applications include base station , portables and PCMCIA cards
for DCS-1800 European applications. Available in tape and
reel.

The DS52-0005 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.

SOIC-8

Ordering Information

Part Number Package

DS52-0005 SOIC-8 Lead Plastic Package
DS52-0005-TR Forward Tape and Reel
DS52-0005-RTR Reverse Tape and Reel

1. If specific reel size is required, consult factory for part number
assignment.

1
1

Typical Electrical Specifications1, TA = +25°C

Parameter Units Min Typ Max

Insertion Loss Above 3.0dB dB — 0.3 0.5
Isolation dB 15 20 —
VSWR — — 1.3:1 1.5:1
Amplitude Balance dB — 0.1 0.15
Phase Balance ° — 2 4

1. All specifications apply with a 50-Ohm source and load impedance.

Specifications subject to change without notice.

n North America: Tel. [phone], Fax [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax+ 44 (1 34 4) 30 0 020

Visit www.macom . com for ad di tional data sheets and pr o d uct i nf orm ation.

V 3.0

1

Low Cost Two-Way SMT Power Divider, 1700-1900 MHz

DS52-0005

Absolute Maximum Ratings1

Parameter Absolute Maximum

Input Power² 1 W CW
Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

1. Exceeding these limits may cause permanent damage.

2. With Internal load dissipation of 0.125 W maximum.

Recommended PCB Configuration

(Dimensions in Inches)

Functional Diagram

Typical Performance @ +25°C

Insertions Loss vs. Frequency

0

-0.5

-1

INSERTION LOSS (dB)

-1.5
2200 2275 2350 2425 2500

FREQUENCY(MHz)

VSWR vs. Frequency

2

1.9

1.8

1.7

1.6

1.5

1.4

VSWR (Ratio)

1.3

1.2

1.1
1

2200 2275 2350 2425 2500

FREQUENCY (dB)

Specifications subject to change without notice.

n North America: Tel. [phone], Fax [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax+ 44 (1 34 4) 30 0 020

Isolation vs. Frequency

-14

-16

-18

-20

-22

ISOLATION (dB)

-24

-26
2200 2275 2350 2425 2500

FREQUENCY (MHz)

Phase Balance vs. Frequency Relative to RF1

0

-1

-2

PHASE, DEGREES

-3
2200 2275 2350 2425 2500

FREQUENCY (MHz)

V 3.0

2

Visit www.macom . com for ad di tional data sheets and pr o d uct i nf orm ation.