MACOM DS52-0004-TR, DS52-0004 Datasheet

Low Cost Two-Way SMT Power Divider 1510-1660 MHz DS52-0004

DS52-0004

Low Cost Two-Way SMT Power Divider 1510­1660 MHz

Features

• Small Size and Low Profile

• Industry Standard SOIC-8 SMT Plastic Package

• Excellent Amplitude and Phase Balance

• Superior Repeatability

• Typical Insertion Loss 0.4 dB

• Typical Isolation 20 dB

• 1 Watt Power Handling

• Frequency Coverage for GPS and LEO Programs

Description

M/A-COM’s DS52-0004 is an IC-based monolithic power divider in
a low cost SOIC-8 plastic package. This 2-way power divider is
ideally suited for applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are required.
Typical applications include base station switching networks and
other communication applications where size and PCB real estate are
a premium. Available in tape and reel.

The DS52-0004 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.

SOIC-8

Ordering Information

Part Number Package

DS52-0004 SOIC-8 Lead Plastic Package
DS52-0004-TR Forward Tape and Reel
DS52-0004-RTR Reverse Tape and Reel

1. If specific reel size is required, consult factory for part number
assignment.

1
1

Typical Electrical Specifications1, TA = +25°C

Parameter Units Min Typ Max

Insertion Loss Above 3.0dB dB — 0.4 0.6
Isolation dB 15 20 —
VSWR Input RL — — 1.3:1 1.5:1
VSWR Output RL — — 1.4:1 1.6:1
Amplitude Balance dB — 0.1 0.2
Phase Balance ° — 1.0 3.0

1. All specifications apply with a 50-Ohm source and load impedance.

S 1561B VER 3

M/A-COM Division of AMP Incorporated n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone],
Fax [phone] n Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

Low Cost Two-Way SMT Power Divider 1510-1660 MHz DS52-0004

Absolute Maximum Ratings1

Parameter Absolute Maximum

Input Power² 1 W CW
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C

1. Exceeding these limits may cause permanent damage.

2. With Internal load dissipation of 0.125 W maximum.

Recommended PCB Configuration

(Dimensions in Inches)

Functional Diagram ³

Typical Performance @ +25°C

Insertion loss Vs Frequency

0

-0.2

-0.4

dB

-0.6

-0.8

-1
1510 1547.5 1585 1622.5 1660

VSWR Vs Frequency

2

1.6

1.2

0.8

VSWR (RATIO)

0.4

0

1510 1547.5 1585 1622.5 1660

MHz

MHz

Isolation Vs Frequency

-14

-16

-18

-20

dB

-22

-24

-26
1510 1547.5 1585 1622.5 1660

MHz

Phase Balance Vs Frequency

0

-0.2

-0.4

-0.6

Degrees

-0.8

-1
1510 1547.5 1585 1622.5 1660

MHz

M/A-COM Division of AMP Incorporated n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone],
Fax [phone] n Europe: Tel. [phone], Fax[phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

S 1561B VER 3