MACOM DS52-0002-TR, DS52-0002-RTR Datasheet

Low Cost Two-Way SMT Power Divider 1920– 2170 MHz DS52-0002

Low Cost Two-Way SMT Power Divider 1920­2170 MHz

Features

• Small Size and Low Profile

• Industry Standard SOIC-8 SMT Plastic Package

• Excellent Amplitude and Phase Balance

• Superior Repeatability

• Typical Insertion Loss 0.7 dB

• Typical Isolation 21 dB

• 1 Watt Power Handling

Description

M/A-COM’s DS52-0002 is an IC-based monolithic power divider in
a low cost SOIC-8 plastic package. This 2-way power divider is
ideally suited for applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are required.
Typical applications include base station switching networks and
other communication applications where size and PCB real estate are
a premium. Available in tape and reel.

The DS52-0002 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.

SOIC-8

Ordering Information

Part Number Package

DS52-0002 SOIC-8 Lead Plastic Package
DS52-0002-TR Forward Tape and Reel
DS52-0002-RTR Reverse Tape and Reel

1. If specific reel size is required, consult factory for part number
assignment.

1
1

Typical Electrical Specifications1, TA = +25°C

Parameter Units Min Typ Max

Insertion Loss Above 3.0dB dB — 0.7 0.9
Isolation dB 15 21 —
VSWR Input RL — — 1.7:1 2.0:1
VSWR Output RL — — 1.5:1 1.7:1
Amplitude Balance dB — 0.06 0.20
Phase Balance ° — 1.0 3.0

1. All specifications apply with a 50-Ohm source and load impedance.

S 1560C VER 3

M/A-COM n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone], Fax [phone] n
Europe: Tel. [phone], Fax[phone]

www.macom.com Specifications subject to change without notice.

Low Cost Two-Way SMT Power Divider 1920– 2170 MHz DS52-0002

PHASE BALANCE VS FREQUENCY

Absolute Maximum Ratings1

Parameter Absolute Maximum

Input Power² 1 W CW
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C

1. Exceeding these limits may cause permanent damage.

2. With Internal load dissipation of 0.125 W maximum.

Recommended PCB Configuration

(Dimensions in Inches)

Functional Diagram ³

Typical Performance @ +25°C

INSERTION LOSS VS FREQUENCY

0.00

-0.20

-0.40

dB

-0.60

-0.80

-1.00

1920.00 1970.00 2020.00 2070.00 2120.00 2170.00

2.00

1.80

1.60

dB

1.40

1.20

1.00

1920.00 1970.00 2020.00 2070.00 2120.00 2170.00

Frequency (MHz)

VSWR VS FREQUENCY

Frequency (MHz)

ISOLATION VS FREQUENCY

-15.00

-20.00

-25.00

dB

-30.00

-35.00

-40.00

1920.00 1970.00 2020.00 2070.00 2120.00 2170.00

Frequency (MHz)

RELATIVE TO RF1

3.00

2.00

Degrees

1.00

0.00

1920.00 1970.00 2020.00 2070.00 2120.00 2170.00

Frequency (MHz)

www.macom.com Specifications subject to change without notice.

M/A-COM n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone], Fax [phone] n
Europe: Tel. [phone], Fax[phone]

S 1560C VER 3