MACOM DS-332 Datasheet

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel. [phone], Fax [phone]

■ Europe: Tel. [phone], Fax [phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

6-38

Two-Way Power Divider
1000 - 2000 MHz

DS-332

V2.00

Features

2° Phase Balance Typical
20 dB Typical Midband Isolation

1.25:1 Typical Midband VSWR, Input

Guaranteed Specifications* (From -55°C to +85°C)

Frequency Range 1000 - 2000 MHz
Insertion Loss (Less coupling) 0.5 dB Max
Isolation 10 dB Min
Amplitude Balance 0.2 dB Max
Phase Balance 6° Max
VSWR (All Ports)

Input 1.7:1 Max
Output 1.4:1 Max

Operating Characteristics

Impedance 50 Ohms Nominal
Maximum Power Rating

or Input Power 1 Watt Max
Internal Load Dissipation 0.1 Watt Max
Environmental

MIL-STD-202 screening available.
Pin Configuration (;P5

Output C; P9, Output D; P1

Pins P2, P4, P6 & P8 are ground.

*All specifications apply with 50 ohm source and load impedance.

Ordering Information

Part No. Package

DS-332 TO-8-2

●

●

●

TO-8-2

M/A-COM Division of AMP Incorporated ■ North America: Tel. [phone], Fax [phone] ■ Asia/Pacific: Tel. [phone], Fax [phone]

■ Europe: Tel. [phone], Fax [phone]

www.macom.com AMP and Connecting at a Higher Level are trademarks.

Specifications subject to change without notice.

6-39

Typical Performance

ISOLATION

INSERTION LOSS

VSWR

Two-Way Power Divider

DS-332

V2.00