Page 1
TABLE LAMP Assembly Instruction
Bulb (not included)
Type A, MAX.60W
WARNING
• Do not plug the power cord into the outlet until the lamp is fully assembled.
• Do not touch the bulb with bare hands.
• Always switch off the electricity supply and allow bulbs to cool for 10 minutes before changing it.
• Never use with an extension cord unless the plug can be fully inserted.
• Do not alter the plug.
Part List
Lamp Body x 1
Lamp Shade x 1
Socket Ring x 1
Assembly
1. Please take out all of the lamp parts from the package box.
2. Remove the socket ring pre-assembled on the socket.
3. Invert and place the shade on to the socket.
4. Reattach the socket ring by turning it clockwise that the socket ring will fasten the shade in place.
5. Install the Max.60W Type A bulb (not included) on to the socket, and then you can plug in to use it.
Contact Information
Thanks for your purchase. Any questions please don't hesitate to contact us. We'll resolve all your
problem ASAP. Customers are always the best teachers for us to keep growing! Should you have any
Loading...