Mackie tt24 schematic

Analog Channels 1-24

48V

MIC

Line: Ð20 to +40 dB

LINE

INSERT

Digital Channels 1-24 @48kHz, 1-12 @96kHz

ADAT

IN (x3)

ADAT 1 (= ADAT 2-24)

ADAT I/O Expansion Card in Slot A or B

Digital Channels 13-24 @96kHz

ADAT

IN (x3)

ADAT 13 (= ADAT 14-24)

Line Input 1 (=Line Input 2-8)

LINE

Select Aux1-12/Matrix1-8

SPDIF IN

AES/EBU IN

TAPE-A IN L

TAPE-A IN R

TAPE-B IN L

TAPE-B IN R

Select Aux1-12/Matrix1-8

MACKIE TT24: STEREO+MONO MODE BLOCK DIAGRAM (#070604_GJ/DF)

Clip

Gain

Mic: 0 to +60 dB

Sig

Digi Insert

Channel Processing Analog Channel 1

(=Analog 2-24)

ADC

Trim

Meter

All processing parameters linked, and true stereo compression.

Phase Gate

High Pass

Optional Stereo Link in Pairs

To Level, Pan & Group Assign

Meter

Digi Insert

To Level, Pan & Group Assign

Meter

Line Input 1 Processing

(=Line Input 2-8)

ADC

Meter

Optional Stereo Link in Pairs

All processing parameters linked.

3-Band

Trim

Para EQ

To Level, Pan & Group Assign

Internal Effects

Processor

(IFX)

To Level, Pan & Group Assign

SRC

Bypass

Slot A only

Slot B only

(with UFX-II

or I/O as Effects

Processors)

Note: There are only 2 expansion Slots: Slot A and Slot B. UP to 2 network cards installed (max 1 as network, max 1 as console linker), maximum of 1 UFX-II card or I/O card configured for effects returns, maximum of 1 ADAT card installed as 96kHz digital channels 13-24. Up to 2 UFX-II or I/O cards configured for inserts.

SRC

Monitor Sel

ADC

Monitor Sel

ADC

Monitor Sel

ADC

To Level, Pan & Group Assign

Digi Insert Send Digi Insert Return

Digi Insert Send

Monitor Sel and any Digital Insert Return

Stereo Select

Slot A

and/or

Slot B

(with UFX-II

or I/O as

Inserts)

4-Band

Para EQ

TALKBACK

MIC

Meter

Digi Insert Return

Reversible

Digi InsertDigi Insert

Comp

Channel 1 Level, Pan & Group Assign

(=Analog 1-24, Digital 1-24, Line input 1-8, IFX Ret 1-8, Slot A Ret 1-8)

Mute

Pan

Fader

Pre/Post

Linked if

Aux 1/2

is stereo

Pre/Post

Optional Stereo Link in Pairs

All controls directly linked, but pans linked inversely, with initial setting of full L

on odd channel, and full R on even channel (same applies to aux send pan).

Sig/Clip

LEDs

Talk

ADC

Linked if Aux 1/2 is stereo

Solo

Mute

LR Assgn

Stereo Level

24 Signals - Selectable

(e.g. Analog 1-24 pre- or

post-processing, Digital 1-

24 outputs, digi inserts etc.)

Slot A only

Slot B only

(with Audio

Network Card)

Solo

Aux 1 (=Odd#Aux)

Fader

Linked if Aux 1/2

is stereo

Aux 2 (=Even#Aux)

Fader

Matrix 1 Assgn (=Mat 2-8)

Aux 1 Assgn (=Odd#Aux)

Aux 2 Assgn (=Even#Aux)

24 Signals (e.g. Replace built-in inputs Analog 1-24 or Digital 1-24, replace ouptuts, send to Digital out, digi inserts, etc.)

C Assgn

LR Assgn

Grp 1Assgn (=Grp 2-8)

Mono to Mains

Pan

Aux 1/2

(= Aux 3-12 in

pairs)

Grp 1

(= Grp 2-8)

RL21

Grp 1 Type

(=Grp 2-8)

Note: A maximum of 8 channels of processing can be assigned at once accross all groups. Mono = 1 channel, Stereo = 2 channels.

Group 1 as Mono (=Group 2-8 as Mono)

Assignable Processing

4-Band

Para EQ

Reversible

Mute

Comp

Mono Group

Fader

Solo

C Assgn

Pan

LR Assgn

Grp 1 Mono

Group 1 as Stereo (=Group 2-8 as Stereo)

Stereo Group

Assignable Processing

Reversible

4-Band

Comp

Para EQ

Mono Aux 1 Processing (=Aux 2-8)

Digi Insert

+Dual

Kill Filter

4-Band

Para EQ

Reversible

Comp

Mute

Fader

Note: Only one Aux channel (mono or stereo) can be solo'd at once.

Mute

Fader

Solo

LR Assgn

C Assgn

Grp 1 Mono

Grp 1 R Grp 1 L

Solo

Aux 1 Mono

Stereo Aux 1/2 Processing (=other Aux pairs as stereo)

Digi Insert

+Dual

Kill Filter

4-Band

Para EQ

Reversible

Comp

Mute

Fader

Solo

Aux 1/2 Stereo L

Aux 1/2 Stereo R

Main Out

PFL Solo

L RCL R

AFL Solo

L R

Digi Insert

+Dual

Kill Filter

4-Band

Para EQ

Digi Insert

4-Band

Digi Insert

Para EQ

+Dual

Kill Filter

AFL/PFL

Matrix Channel 1 (=Matrix 2-8)

Group 1 Mono (default)

or From a Matrix+ selection

Group 2 Mono (default)

or From a Matrix+ selection

Group 3 Mono (default)

or From a Matrix+ selection

Group 4 Mono (default)

or From a Matrix+ selection

Group 5 Mono (default)

or From a Matrix+ selection

Group 6 Mono (default)

or From a Matrix+ selection

Group 7 Mono (default)

or From a Matrix+ selection

Group 8 Mono (default)

or From a Matrix+ selection

Movable

Comp Soft Clip

Comp

Digi In L Tape-A In L Tape-B In L

Digi In R Tape-A In R Tape-B In R

Matrix 1

(= Matrix 2-8)

Fader

Solo

Main L (default)

Main R (default)

Main C (default)

From Talkback

Note: Matrix only available when activate.

Digi Insert

To Matrix

Matrix+ Selections: Any Grp Mono, L, R; Main Out L, R, C; Analog/Digitla/Line Channel Pre/Post Fader; Stereo L /R pre/post fader.

Soft Clip

Meter

Solo Level

Soft Clip

Monitor

Sel

Solo

Control

Group/Matrix Out 1 (=Group/Matrix Out 2-8)

Matrix Active

(ganged)

Group 1 Mono

Matrix 1

To internal FX

and UFX-II

(only availble if matrix active)

Delay

Meter

Delay only available if matrix active.

Digital Channels 1-24 @48kHz, 1-12 @96kHz

Analog Ch1 Pre-Processing

Analog Ch1 Post-Processing

ADAT I/O Expansion Card in Slot A or B

Digital Channels 13-24 @96kHz

Analog Ch13 Pre-Processing

Analog Ch13 Post-Processing

Aux Send 1 (=Odd#Aux Send 3,5,7,9,11)

Mono/Stereo

Link

Aux 1 Mono

Meter

To internal FX

and UFX-II

DAC

Digi Insert Send

DAC

Soft Clip

Digi I/O is Insert

DAC

+ –

DAC

Digital Out Select

+ –

(ganged)

LEFT OUT

RIGHT OUT

CTR/MONO

OUT

SPDIF OUT

AES/EBU OUT

TAPE-A OUT L

TAPE-A OUT R

CUE

MONITOR L

MONITOR R

PHONES

GROUP/MATRIX

OUT 1

(=Group/Matrix 2-8)

ADAT 1

ADAT 13

ADAT OUT (x3)

AUX SEND 1

Aux Send 2 (=Even#Aux Send 4,6,8,10,12)

Aux 2 Mono

To internal FX

and UFX-II

Meter

DAC

Soft Clip

AUX SEND 2

Analog Channels 1-24

48V

MIC

LINE

INSERT

Digital Channels 1-24 @48kHz, 1-12 @96kHz

ADAT

IN (x3)

ADAT 1 (= ADAT 2-24)

ADAT I/O Expansion Card in Slot A or B

Digital Channels 13-24 @96kHz

ADAT

IN (x3)

ADAT 13 (= ADAT 14-24)

Line Input 1 (=line Input 2-8)

LINE

Select Aux1-12/Matrix1-8

SPDIF IN

AES/EBU IN

TAPE-A IN L

TAPE-A IN R

TAPE-B IN L

TAPE-B IN R

Select Aux1-12/Matrix1-8 To Level, Pan & Group Assign

Select Aux1-12/Matrix1-8

MACKIE TT24: LCR MODE BLOCK DIAGRAM (#070604_GJ/DF)

Clip

GAIN

Mic: 0 to +60 dB

Line: Ð20 to +40 dB

Sig

Digi Insert

Channel Processing Analog Channel 1

(=Analog 2-24)

ADC

Trim

Meter

All processing parameters linked, and true stereo compression.

Phase Gate

High Pass

Optional Stereo Link in Pairs

To Level, Pan & Group Assign

Meter

Digi Insert

To Level, Pan & Group Assign

Meter

Line Input 1 Processing

(=Line Input 2-8)

ADC

Meter

Optional Stereo Link in Pairs

All processing parameters linked.

3-Band

Trim

Para EQ

To Level, Pan & Group Assign

Internal Effects

Processor

(IFX)

To Level, Pan & Group Assign

TALKBACK

To Level, Pan & Group Assign

SRC

Bypass

Slot A only

Slot B only

(with UFX-II

or I/O as Effects

Processors)

SRC

Monitor Sel

ADC

Monitor Sel

ADC

To Level, Pan & Group Assign

Monitor Sel

ADC

Digi Insert Send Digi Insert Return

Digi Insert Send

Monitor Sel and any Digital Insert Return

Stereo Select

Slot A

and/or

Slot B

(with UFX-II

or I/O as

Inserts)

Channel 1 Level, Pan & Group Assign

(=Analog 1-24, Digital 1-24, Line Input 1-8, IFX Ret 1-8, Slot A Ret 1-8)

Reversible

Digi InsertDigi Insert

4-Band

Comp

Para EQ

All controls directly linked, but pans linked inversely, with initial setting of full L

on odd channel, and full R on even channel (same applies to aux send pan).

MIC

Meter

Digi Insert Return

24 Signals - Selectable

(e.g. Analog 1-24 pre- or

post-processing, Digial 1-

24 outputs, digi inserts etc.)

Sig/Clip

LEDs

Mute

Fader

Optional Stereo Link in Pairs

Talk

ADC

Mute

Stereo Level

Pan

Pre/Post

Linked if

Aux 1/2

is stereo

Pre/Post

Slot A only

Slot B only

(with Audio

Network Card)

Linked if Aux 1/2 is stereo

Solo

LR Assgn

Aux 1 (=Odd#Aux)

Linked if Aux 1/2

is stereo

Aux 2 (=Even#Aux)

Fader

24 Signals (e.g. Replace built-in inputs Analog 1-24 or Digital 1-24, replace ouptuts, send to Digital out, digi inserts, etc.)

Solo

C Assgn

NOT LR

LR Assgn

NOT C

LR AND C Assgn

Grp 1Assgn (=Grp 2-8)

Matrix 1 Assgn (=Mat 2-8)

Aux 1 Assgn (=Odd#Aux)

Aux 2 Assgn (=Even#Aux)

Pan

Mono

to Mains

Aux 1/2

(= Aux 3-12 in

pairs)

Grp 1

(= Grp 2-8)

RL21

L CR

Grp 1 Type

(=Grp 2-8)

Mono Group

Note: A maximum of 8 channels of processing can be assigned at once across all groups. Mono = 1 channel, Stereo = 2 channels, LCR = 3 channels.

Group 1 as Mono (=Group 2-8 as Mono)

Assignable Processing

Reversible

4-Band

Comp

Para EQ

Mute

Fader

Solo

C Assgn

only

Pan

LR Assgn

only

LR and C Assgn

Grp 1 Mono

Group 1 as Stereo (=Group 2-8 as Stereo)

Stereo Group

Assignable Processing

Reversible

4-Band

Comp

Para EQ

Mute

Fader

Solo

LR Assgn

Grp 1 Mono

Grp 1 R Grp 1 L

Group 1 as LCR (=Group 2-8 as LCR)

Solo

Assignable Processing

LCR

Group

Mono Aux 1 Processing (=Aux 2-8)

Digi Insert

4-Band

Para EQ

+Dual

Kill Filter

4-Band

Para EQ

Reversible

Comp

Reversible

Comp

Mute

LR+C Assgn

Fader

Grp 1 Mono

Grp 1 R Grp 1 C Grp 1 L

Note: Only one Aux channel (mono or stereo) can be solo'd at once.

Mute

Fader

Solo

Aux 1 Mono

Stereo Aux 1/2 Processing (=other Aux pairs as stereo)

Digi Insert

+Dual

Kill Filter

4-Band

Para EQ

Reversible

Comp

Mute

Fader

Solo

Aux 1/2 Stereo L

Aux 1/2 Stereo R

Main Out

PFL Solo

L RCL R

AFL Solo

L R

Digi Insert

+Dual

Kill Filter

4-Band

Para EQ

Digi Insert

4-Band

Para EQ

Digi Insert

+Dual

Kill Filter

Matrix Channel 1 (=Matrix 2-8)

Group 1 Mono (default)

or From a Matrix+ selection

Group 2 Mono (default)

or From a Matrix+ selection

Group 3 Mono (default)

or From a Matrix+ selection

Group 4 Mono (default)

or From a Matrix+ selection

Group 5 Mono (default)

or From a Matrix+ selection

Group 6 Mono (default)

or From a Matrix+ selection

Group 7 Mono (default)

or From a Matrix+ selection

Group 8 Mono (default)

or From a Matrix+ selection

Movable

Comp Soft Clip

Comp

Tape-A In L Tape-B In L

Tape-A In R Tape-B In R

Fader

Digi In L

Digi In R

Matrix 1

(= Matrix 2-8)

Fader

AFL/PFL

Solo

Main L (default)

Main R (default)

Main C (default)

From Talkback

Note: Matrix only available when activate.

Digi Insert

To Matrix

Matrix+ Selections: Any Grp Mono, L, R, C; Main Out L, R, C; Any Analog/Digitla/Line Channel Pre/Post Fader; Stereo L /R pre/post fader.

Soft Clip

Meter

Solo Level

Soft Clip

Monitor

Sel

Solo

Control

Group/Matrix Out 1 (=Group/Matrix Out 2-8)

Matrix Active

(ganged)

Group 1 Mono

Matrix 1

To internal FX

and UFX-II

(only availble if

matrix active)

Meter

Delay only availble if matrix active.

Delay

Digital Channels 1-24 @48kHz, 1-12 @96kHz

Analog Ch1 Pre-Processing

Analog Ch1 Post-Processing

ADAT I/O Expansion Card in Slot A or B

Digital Channels 13-24 @96kHz

Analog Ch13 Pre-Processing

Analog Ch13 Post-Processing

Aux Send 1 (=Odd#Aux Send 3,5,7,9,11)

Mono/Stereo

Link

Aux 1 Mono

Meter

To internal FX

and UFX-II

Digi Insert Send

DAC

Soft Clip

DAC

–

DAC

–

DAC

–

Digi I/O is Insert

DAC

Digital Out Select

DAC

+ –

(ganged)

LEFT OUT

RIGHT OUT

CTR/MONO

OUT

SPDIF OUT

AES/EBU OUT

TAPE-A OUT L

TAPE-A OUT R

CUE

MONITOR L

MONITOR R

PHONES

GROUP/MATRIX

OUT 1

(=Group/Matrix 2-8)

ADAT 1

ADAT 13

ADAT OUT (x3)

AUX SEND 1

Aux Send 2 (=Even#Aux Send 4,6,8,10,12)

Aux 2 Mono

To internal FX

and UFX-II

Meter

DAC

Soft Clip

AUX SEND 2

Mackie tt24 schematic

Specifications and Main Features

Frequently Asked Questions

User Manual