Mackie SP800S User Manual
SP800S
SP800S
6
0
W
7
0
v
3
0
W
1
5
W
7
.
5
W
4
W8W
1
5
W
3
0
W
6
0
W
1
0
0
v
CAUTION: DO NOT USE
WITH 100V SETTING
Specifications
System
Freq. Range (–10 dB):
60Hz-220Hz
Freq. Response (±3 dB):
75Hz-190Hz
System Sensitivity:
91 dB, 1W@1m
Rated Maximum SPL:
112 dB @ 1 m (3.3 ft) peak
System Input Power Rating:
60W RMS, 240W Peak
Constant Voltage:
70V, 100V
Power Taps:
4, 7.5, 15, 30, 60W
Crossover: 220Hz, 12 dB per octave
Transducers
Low Frequency:
8" (200mm) carbon fiber woofer
Physical
Enclosure:
Rectangular MDF board construction
Attachment Inserts:
6 points M5 threaded
Color: Black or white (SP800SW) PVC covering
Input Connectors:
Terminal strip connector plate
Dimensions HxWxD:
23.82" x 13.82" x 7.87"
(605 mm x 351 mm x 200 mm)
Net Weight:
33 lb. (15.0 kg)
Options
Wall and ceiling vent grilles available
The SP800S is an innovative and compact
subwoofer designed for constant voltage,
parallel connection to a distributed system.
It is ideal for music reinforcement for business
applications. It can be flush-mounted into
standard framed wall, a drop ceiling, or
surface mounted on any flat surface.
The high-power transducer is a unique 8"
carbon fiber woofer.
Connections are made to a terminal strip
connector with a parallel input/output that
allows for easy daisy-chaining. A built-in
70V/100V transformer provides selectable
wattage taps.
The enclosure is constructed of MDF board
with six M5 threaded inserts that can be used
with a variety of optional installation hardware.
SP800S
Subwoofer Speaker
Quick-Start Guide
Safety First!
Before connecting and using the
equipment, please read this Quick-Start Guide
carefully and keep it for future reference.
WARNING! This equipment has been
designed to be installed by qualified
professionals only! There are many factors to
be considered when installing professional
sound reinforcement systems, including
industrial@mackie.com
16220 Wood-Red Road NE Woodinville, WA 98072
TEL +888.337.7404, FAX +425.487.4337
UK +44.1268.570.808, FAX +44.1268.570.809 +industrial@rcf-uk.com
ITALY +39.0522.354.111, FAX +39.0522.332.294 +industrial@rcf.it
FRANCE +33.3.8546.9160, FAX +33.3.8546.9161 +industrial@rcf.fr
GERMANY +49.2572.96042.0, FAX +49.2572.96042.10 +industrial@mackie.de
Part No. 910-186-20 Rev. A 3/00
© 2000 Mackie Industrial. All Rights Reserved. Printed in the USA.
mechanical and electrical considerations, as
well as acoustic coverage and performance.
Mackie Industrial strongly recommends that
this equipment be installed only by a
professional sound installer or contractor.
SP800S
7
OUT
+
_
+
_
IN
SP800S
MADE IN ITALY
SERIAL N.
1
0
0
0
v
v
6
0
W
3
0
6
0
CAUTION: DO NOT USE
WITH 100V SETTING
Rear Panel Features
and Controls
W
W
4
8
W
5
.
W
7
5
1
W
5
1
W
W
0
3
W
1. This rotary control selects the power tap
for the internal constant voltage
transformer. For a 70V system, choices are
4, 7.5, 15, 30, and 60W. For a 100V
Connections
To use the terminal strip connector, strip the
speaker wire back about 1/2" inch, loosen the
screws on the terminal strip and wrap the wire
around the screw. Tighten down the screw
with a small slot-head screwdriver.
system, choices are 8W, 15W, 30W, and
60W.
2. This terminal strip is used to connect the
speaker wiring to the SP800S. Connect the
amplifier output to the IN screw terminals.
Use the OUT terminals to daisy-chain the
signal to the next speaker in the
distributed system.
Hookup
OUTPUTS
25V 50V 70V 100V GND
70V Connection
POWER AMPLIFIER
IN
MADE IN ITALY
–
+
SP800S
_
_
IN
MADE IN ITALY
+
SP800S
Installation
_
OUT
+
SERIAL N.
OUT
+_+
SERIAL N.
+
–
To Additional
Speakers
The SP800S can be mounted using the
optional mounting brackets. Optional wall and
ceiling vent grills are also available.
WARNING: Consult a professional rigger or
structural engineer prior to suspending
loudspeakers from a structure not intended
for that use. Always know the working load
limit of the structure supporting the
loudspeaker array. Always make sure that
the rigging hardware minimum rating is at
least five times the actual load.
Loading...