Mackie S225 User Manual

HOOKUP DIAGRAMS
Quick-Start
Make all initial connections with the power switches OFF on all equip­ment. Make sure all master volume, level, or gain controls are all the way down.
Stereo Power Amplifier
Right Line-level Output
1202-VLZPRO
Mixer or
Preamplifier
Left
Line-level
Output
2. Connect the Speaker Output from your power amplifi er (or powered mixer) to the INPUT connec- tor on the S225.
3. Turn on your mixing console (or other signal source).
4. Turn on the amplifi er. Turn up its volume or gain control(s) as recommended by the manufacturer.
5. Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation.
S225 S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004
1/4"NL4
TIP +
SLEEVE -
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W • PEAK/ 2800W
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. • COPYRIGHT ©2004
1/4"NL4
TIP +
SLEEVE -
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W • PEAK/ 2800W
S225: WITH A MIXER AND POWER AMPLIFIER
S225
From LEFT
SPEAKER OUT
From LEFT
SPEAKER OUT
Stereo Power Amplifier
Stereo Power Amplifier
Line-level
THRU Connection
1202-VLZPRO
From RIGHT
SPEAKER OUT
From RIGHT
SPEAKER OUT
S225
S225: WITH A MIXER AND TWO POWER AMPLIFIERS
S225S225
4
S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. COPYRIGHT ©2004
S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. COPYRIGHT ©2004
S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. COPYRIGHT ©2004
S225
S225
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA & WOODINVILLE, WA,USA
"MACKIE" AND THE "RUNNING MAN" FIGURE
ARE REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES INC. COPYRIGHT ©2004
1/4"NL4
TIP +
SLEEVE -
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W PEAK/ 2800W
1/4"NL4
TIP +
SLEEVE -
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
Stereo Power Amplifier
Mixer or
Preamplifier
Left
Line-level
Output
1/4"NL4
TIP +
SLEEVE -
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W PEAK/ 2800W
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
Right Line-level Output
1202-VLZPRO
1/4"NL4
TIP +
SLEEVE -
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W PEAK/ 2800W
PIN 1 + +
PIN 1 - -
SERIAL NUMBER MANUFACTURING DATESERIAL NUMBER MANUFACTURING DATE
S225: WITH A MIXER AND POWER AMPLIFIER, USING THE 1/4" THRU JACKS
NOMINAL IMPEDANCE: 4 OHMS
POWER HANDLING: CONT/ 700W PEAK/ 2800W
S225
S218s
S225
Mackie M•1400 Power Amplifier
Subwoofer Mode
Line-level
THRU Connection
Stereo Power Amplifier
From LEFT
SPEAKER OUT
From RIGHT
SPEAKER OUT
1202-VLZPRO
The S225s can be used with the Mackie S218s subwoofers to create an incredibly powerful system. The FR Series M1400 power amplifi ers have a built-in subwoofer crossover. If you are not using a Mackie M1400 amplifi er, you can use an active crossover between the fi rst and second amplifi ers with the crossover set between 125 Hz to 180 Hz. This allows more amplifi er power for the low frequencies rather than being wasted as heat in the S218s internal built-in crossover.
S218s
S225: WITH A MIXER, TWO POWER AMPLIFIERS, AND TWO S218S SUBWOOFERS
5
Loading...