Mach Speed Technologies TRIO A1000 User Manual

Model A1000
Congratulations on purchasing your Trio Personal Media Player! To get
the most out of your purchase, please take the time to carefully read
through this manual.
Foreword
If any problems occur during while using your Trio, please feel free to
contact Mach Speed technical support at 580-272-0035, or sending an email to mssupport@machspeed.com
Thank you for your support and cooperation!
Mach Speed Technologies bears no responsibility for any damage or
loss of personal data due to misuse of software and/or hardware,
damage to the player caused by human factors, replacement of battery,
or other unforeseen circumstances. To prevent loss of your data, please
backup your data regularly.
Information in the manual is subject to change without notice
subject to copyright protection. Copying or otherwise reproducing this
material without prior written consent is prohibited.
Due to Firmware changes, some of the pictures and functions described
in this manual may not be the same as are included with your player.
Note:
This player does NOT support DRM encrypted or copy protected WMA
audio files, such as those provided by many subscription sites. Please
.
and is
1
verify that your download service allows you to download files in MP3
format, or a non encrypted WMA format before loading files to the player.
The playback times listed refer to the maximum playback times
possible, using the best power savings. The actual playback time may
differ as adjustments to screen brightness, power savings modes,
volume, etc are made.
As parameters such as bitrate and codecs differ, the player may not be
compatible with all listed files. If you are experiencing issues playing your
files on this player, we recommend using a supported conversion tool to
reconvert your file to the specifications of the device.
Caution
Modifications not approved by the party responsible for compliance will
void the user’s authority to operate the equipment.
NOTE- This equipment has been tested and found to comply with the
limits for Class B Digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generate,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio or telephone reception, which can be determined by turning the
equipment off and on, the user in encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
2
Increase the separation between the equipment and the receiver
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
Do not use the player in exceptionally cold or hot, dusty, damp or dry
environments.
Do not drop, strike, or throw your player. Physical damage to your player
will void ALL warranties.
Please charge your battery when:
The battery power icon shows an empty icon;
The system automatically shuts down and powers back off when
you switch the unit on once again;
There is no response if you press a button
Please always follow the correct disconnect procedures for your
operating system. Do not disconnect power abruptly when the player is
being formatted or in the process of uploading or downloading files.
Otherwise it may lead to file corruption, firmware failure, and even
hardware damage.
We are not liable for any loss of data stored on this device.
Please do not dismantle this player. Any disassembly not done by
an authorized technician will void ALL warranties
This product and manual are change without subject to notice.
3
Appearance
Basic Operations
Powering on: Set the ON/OFF switch to the ON position, then press
and hold the PLAY button for 5 seconds. Powering off: Press and hold the PLAY button for 5 seconds, until
the player powers off. Once the device is powered off, set the ON/OFF
switch to the OFF position.
4
Please note that if you do not press and hold the PLAY button before
setting the ON/OFF switch, the device will not retain any settings
changes you have made.
Adjusting the volume: In Music, Record, Radio modes, press the
VOL- or VOL+ buttons to decrease or increase the volume. Charging the player: To charge your player, set the ON/OFF switch
to the ON position and connect the device to a powered USB port.
Loading Files Using Windows Media Player
(Note: you must use Windows Media Player 10 or later to use this feature.)
(Note: this player does not support DRM encrypted audio files, such as those downloaded from the Overdrive download service.)
1. Open Windows Media Player and connect the MP3 player
to a working USB port.
5
Loading...
+ 14 hidden pages