Mach Speed Technologies ECLIPSECLD2SL User Manual
CLD2BL
User’s Manual
Thank you for your purchase.
Please read this manual carefully
before using your player
Eclipse CLD2BL
Note
Congratulations on purchasing your MP3 player! To get the most out of your purchase, please take the
time to carefully read through this manual.
If you have any remaining questions, comments, or concerns please feel free to contact Mach Speed
technical support at 580- 272-0035 or by email at mssupport@machspeed.com. Thank you for your
support and cooperation!
We bear no responsibility for any damage or loss of personal data due to misuse of software and/or
hardware, damage to the player caused by human factors, replacement of battery or other unforeseen
circumstances. To prevent data loss, please backup your data regularly.
Information in the manual is subject to change without notice.
Information in the User’s Manual is subject to copyright protection. Without prior written permission,
photocopying or copying is prohibited.
Some of the pictures or functions described in this manual may not be the same as those included with
your player.
If you do not use your MP3 player for an extended period of time, please switch it off.
•
Avoid using your MP3 player in extremely hot, cold, dusty or wet conditions.
•
Avoid striking or dropping your MP3 player, as it may cause physical damage, battery loosening,
•
or other hardware damage.
Please charge the player under the following conditions:
•
o
The battery icon shows in normal operation with low battery prompt.
o
The player turns off automatically.
o
There is no response when pressing keys and the battery icon shows .
Static electricity may cause damage to interior hardware of the player.
•
Do not disconnect the player while formatting, uploading, or downloading files to the player, as it
•
2
Eclipse CLD2BL
may cause program errors, or cause the unit to not power on.
When the player is used as a removable hard disk, user should store files following correct file
•
management methods. We are not liable for any data loss or damage.
Do not disassemble this product for any reason. Disassembling this player will void all warranties
•
associated with the player. If you have any issues or questions, please contact our technical
support department.
Contents
COMPUTER COMMUNICATION .................................................................................................................... 8
CHAPTER 2 INTRODUCTION TO YOUR PLAYER
...............
ERROR: REFERENCE SOURCE NOT FOUND
FUCTION KEY ILLUSTRATION
BASIC OPERATION
FOR CHARGE
USE AS AN USB DRIVE
CHAPTER 3 REFERENCES TO USER
3.1 TROUBLE-SHOOTING
3.2 SPECIFICATIONS
..................................................................................................... ERROR: REFERENCE SOURCE NOT FOUND
........................................................................................................... ERROR: REFERENCE SOURCE NOT FOUND
.................................................................................................... ERROR: REFERENCE SOURCE NOT FOUND
.......................................................................................................... ERROR: REFERENCE SOURCE NOT FOUND
........................................................................................ ERROR: REFERENCE SOURCE NOT FOUND
........................................................................................... ERROR: REFERENCE SOURCE NOT FOUND
....................................
3
ERROR: REFERENCE SOURCE NOT FOUND
Introduction to your player
Function key illustration
1．LCD screen
2．ON—OFF：Power switch
Eclipse CLD2BL
3
． ：
4
．Ｍ：
5．VOL: Volume button
6.
7
． ：
8．Ear Piece Socket
9．USB jack
PLAY
Menu/ A-B
NEXT
：
PREV
4
Eclipse CLD2BL
Basic operation
▲Power On: Set the power switch to the ON position, and press and hold the button to power on.
▲ Power Off: Press and hold the button to power off. You can then set the power switch to the
OFF position, but doing so will erase any system changes you made.
▲ Charging the battery: To charge the battery, set the power switch to the ON position, and
connect the player to a powered USB port. While the player is charging, you can load files to the player.
Please charge the battery from 3-5 hours to completely charge the battery.
Music mode
To play your music files, you will enter music mode. On the main menu, use the NEXT and PREV buttons
to highlight the “MSC” mode and briefly press the “M” button. This will display your current song. To play
the file you can press PLAY. To pause the file, press PLAY again.
While a file is playing you can enter the Music Submenu by pressing the “M” button briefly. The Music
Submenu allows you to adjust your repeat mode, Equalizer, Tempo rate, Activate the A-B Replay mode,
and set the number of times you’re A-B replay will play, and the gap between plays. The functions are
described below.
Repeat- Allows you to set your repeat mode. Choose from Normal, Repeat One, Folder, Repeat
•
folder, Repeat all, Random, and Intro.
Equalizer- Allows you to set your equalizer. Choose from Natural, Rock, Pop, Classic, Soft, Jazz,
•
5
Eclipse CLD2BL
and DBB.
Tempo- Allows you to adjust the temp of your audio. You can select from 80% slower to 80%
•
faster, adjusted in 10% increments.
Replay- Enters the A-B repeat mode. Once you select this item, you will be returned to the music
•
file. Press NEXT to select the “A” point (starting point) and press NEXT again to select the “B”
point (ending point). Press NEXT a third time to begin playing your selection.
Replay times- Allows you to select the number of times your A-B repeat selection will play
•
Replay gap- Allows you to set the gap between A-B replays.
•
All menu selections are made by using the NEXT and PREV buttons to select your option, and
pressing “M” to confirm the selection.
When a file is played or stopped, you can enter the file management menu by pressing the “M”
button. Once in the file management menu, you can select local folder, which allows you select the
file you wish to play; delete, which will delete the current file; or delete all, which will delete all of the
files on the player.
In the local folder, use the NEXT and PREV keys to select the file you wish to play, and press the “M”
button to confirm. This will bring up the file, and you will press PLAY to begin playing.
At any time, you can press and hold the “M” button to return to the main menu.
System Settings
The System Settings mode allows you to adjust most of your system settings. On the main menu, use
6
Loading...