Mace MVC-PTZ-23X Product Manual

Product Manual

5101 NW 21st Ave, Su ite 210 • Fort Laude rdale, FL 33309
www.mace.co m • (877) 585-622 3

MVC-PTZ-23X

Indoor/Outdoor 23× PTZ
Speed Dome Camera

2

Table of Contents

1 FEATURES AND FUNCTIONS .................................................................................... 8

1.1 General Introduction...........................................................................................................................................8

1.2 Features ...............................................................................................................................................................8

1.2.1 On-Screen Menu............................................................................................................................................8

1.2.2 On-screen Tips ...............................................................................................................................................8

1.2.3 Support multiple protocols ............................................................................................................................8

1.2.4 Proportional Pan and Tilt...............................................................................................................................8

1.2.5 Preset Setup and Recall ...............................................................................................................................8

1.2.6 Auto Scan........................................................................................................................................................9

1.2.7 Auto Pattern ....................................................................................................................................................9

1.2.8 Auto Touring ...................................................................................................................................................9

1.2.9 Privacy Masking .............................................................................................................................................9

1.2.10 Action on Alarm .........................................................................................................................................9

1.2.11 Auto Flip......................................................................................................................................................9

1.2.12 Self-diagnosis ............................................................................................................................................9

1.2.13 Day/Night Mode (B/W & Color Mode) ....................................................................................................9

1.2.14 Auto Focus ...............................................................................................................................................10

1.2.15 Backlight Compensation.........................................................................................................................10

1.2.16 Pan Tilt and Zoom...................................................................................................................................10

1.2.17 3D Intelligent Location ............................................................................................................................10

1.2.18 Idle Status.................................................................................................................................................10

1.2.19 Image Flip.................................................................................................................................................10

1.3 Specifications ....................................................................................................................................................10

1.3.1 Technical Specifications..............................................................................................................................10

1.3.2 Performance Specifications........................................................................................................................11

2 PROTOCOL, BAUD RATE, ADDRESS SETUP......................................................... 13

2.1 Protocol and Baud Rate Setup .......................................................................................................................13

2.2 Set address dial switch ....................................................................................................................................14

3

3 CABLE CONNECTION............................................................................................... 15

3.1 Multiple-function Composite Cable ................................................................................................................15

3.2 Alarm Cable Connection...............................................................................................................................15

3.2.1 System Layout..............................................................................................................................................16

3.2.2 Alarm Connection.........................................................................................................................................17

3.2.3 Keyboard Connection..................................................................................................................................18

4 MENU......................................................................................................................... 19

4.1 Screen Menu Index.........................................................................................................................................19

4.2 Self-diagnosis System Information.................................................................................................................20

4.3 Main Menu .........................................................................................................................................................20

4.4 Menu Operation...............................................................................................................................................21

4.4.1 System Information ......................................................................................................................................21

4.4.2 Display Setting..............................................................................................................................................22

4.4.3 Camera Setting.............................................................................................................................................23

4.4.4 Function Setting............................................................................................................................................26

4.4.5 Alarm Setup ..................................................................................................................................................33

4.5 Dome Abnormal Phenomenon Operation................................................................................................34

4.5.1 Restore to Factory Default Setup ..............................................................................................................34

4.5.2 PTZ Movement is not smooth ....................................................................................................................34

5 FAQ ............................................................................................................................ 35

5.1 Daily Maintenance..........................................................................................................................................35

5.2 Problems and Solutions................................................................................................................................35

6 APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION................................. 36

7 APPENDIX Ⅱ ABOUT RS485 BUS............................................................................ 37

7.1 RS485 Bus Main Feature ................................................................................................................................37

4

7.2 RS485 Bus Transmission Distance................................................................................................................37

7.3 Connection Methods and Terminal Resistance ...........................................................................................37

7.4 The Problem in Practical Use..........................................................................................................................38

7.5 The Problem in Practical Use..........................................................................................................................38

7.6 RS485 Bus FAQ................................................................................................................................................39

8 APPENDIX TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ........................ 40

5

Welcome

Thank you for purchasing our product!

This user’s manual is designed to be a reference tool for the operation of your system.

Here you can find information about this speed dome features and functions, as well as a detailed

menu tree.

Please keep it well for future reference!

Before installation and operation, please read the following safeguards and warnings carefully!

6

Important Safeguards and Warnings

1．Electrical safety

z All installation and operation here should conform to your local electrical safety codes.

z The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is rated 24V AC in the IEC60950-1.

z We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

z We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation Security

z No heavy stress, violent vibration or water splash are allowed during transportation, storage and

installation.

z Please use the original packing material (or the material of the same quality) when you ship it back

to the manufacturer.

3．Installation

z Do not apply power to the product before completing installation.

z Do not put object on the product.

4．Environment

z This series product should be installed in a cool, dry place away from direct sunlight, inflammable,

explosive substances and etc.

z The working temperature ranges from -40℃—60℃(Outdoor). Please keep it away from the

electromagnetic radiation object and environment.

z Please keep the sound ventilation.

z Do not allow the water and other liquid falling into the device.

z Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.

Otherwise it may result in CCD (CMOS) optical component damage.

5. Daily Maintenance

z Current series product has no power button. Please unplug all corresponding power cables before

your begin installation or daily maintenance work.

z Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work

for a long time.

z Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of

the device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.

z Do not use the volatility solvent such as the benzene or thinner, or detergent with strong

abradibility. It may result in lens damage or it may adversely affect the device performance.

z If there is too much dust, please use the water to dilute the mild detergent first and then use it to

clean the device. Finally use the dry cloth to clean the device

6. About Accessories

Always use all the accessories recommended by manufacturer.

Before installation, please open the package and check that all the components are included in

the package:

Contact you local retailer ASAP if something is missing in your package.

8

1 Features and Functions

1.1 General Introduction

This series quick installation speed dome product is an integrated high intelligent speed dome. It

adopts water drop configuration design and has small and delicate shape. This is a digital and

intelligent product of vivid video. The installation is convenient.

These series product external ports adopt the buckle device to realize the quick installation.

There is waterproof interface for the pipe thread. All of these make the installation easier. It

supports various languages, real-time clock function and protocol auto recognition. It supports

360° continuously pan, 92°tilt and 180° auto flip. It can realize no blind spot monitor.

This series product can be widely used in remote monitor environment such as electric power,

customs, and water conservancy.

1.2 Features

This series speed dome has the following features:

1.2.1 On-Screen Menu

This series product menu supports multiple languages.

It is easy for you to view dome information and configure dome, camera parameters.

1.2.2 On-screen Tips

Here you can view:

z Preset name and system version (Software and hardware)

z Dome system temperature. (Optional. You can disable this function)

z Dome address. (Optional. You can disable this function)

1.2.3 Support multiple protocols

This series speed dome supports universally used protocols such as PELCO-P and PELCO-D.

You can use various devices (such as matrix, control keyboard and DVR) and protocols to

operate speed dome.

1.2.4 Proportional Pan and Tilt

This function keeps the image from moving too fast when there is a large amount of zoom.

Speed dome continually decreases or increases pan and tilt speeds in proportion to depth of

zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms

speed is decreasing, the camera moving speed becomes fast.

1.2.5 Preset Setup and Recall

Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the

memory so that you can quickly adjust the dome and PTZ to the correct position. This series

speed dome max supports 255 presets in PELCOD and PELCOP protocols. .

9

1.2.6 Auto Scan

Camera scans back and forth regularly in a horizontal field. Here you need to set left and right

limit and scan speed. You can set 5 scanning paths.

1.2.7 Auto Pattern

Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode

during auto pattern. For each pattern, the time should be less than 60 seconds. You can set 5

pattern paths.

1.2.8 Auto Touring

Add addresses into a routine in a desired order and then set time and stop duration for each

address. The dome will begin an auto touring between these addresses. You can set 8 touring

paths.

1.2.9 Privacy Masking

Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking

area will move with pan and tilt functions and automatically adjust in size as the lens zooms. You

can set 8 privacy masking zones (Depends on camera type).

1.2.10 Action on Alarm

This series speed dome support three alarm activation operations. There are 7 alarm inputs

(NO/NC). Alarms can be individually programmed to initiate an associated preset, scanning, or

tour when received. Dome will return to a previously programmed state after alarm

acknowledgement or to its previous position before alarm.

1.2.11 Auto Flip

As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180

degrees and repositions itself for uninterrupted viewing of any subjects that passes directly

beneath the dome.

1.2.12 Self-diagnosis

There is a self diagnosis procedure when dome boots up.

z Tilt and vertical engine check

z Camera diagnostics

z Display dome information and diagnosis information such as address, protocol, baud

rate, type.

1.2.13 Day/Night Mode (B/W & Color Mode)

System supports auto/manual switch in low illumination. You can specify the switch time.

z In the auto mode and photosensitive resistance mode, the camera can automatically

switch the CCD level according to the light change. In the manual mode, it can use the

menu or the button to realize the color display, black and white display, and schedule

switch. All the modes will have automatically activation operation on the IR light except

the camera auto mode.

z This function works with the IR night vision function.

10

1.2.14 Auto Focus

Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to

get vivid image. You can use FAR or NEAR button to adjust focus manually.

1.2.15 Backlight Compensation

Balance the brightest and darkest sections of a scene to produce a more vivid picture.

1.2.16 Pan Tilt and Zoom

Supports zoom in and zoom out during tilt and pan movement.

In this period focus and iris are both in auto mode to get vivid image.

1.2.17 3D Intelligent Location

Working with DVR, just click part of the current scene will be displayed in the central window and

automatically zooms. All of these allow you to trace precisely.

1.2.18 Idle Status

When there is no available order, you can use menu to set dome idle status after specified

duration. The idle status includes turn to specified preset or go to scan, tour or pattern function.

1.2.19 Image Flip

You can enable image flip in the menu.

The flip function allows you to view continuous video.

1.3 Specifications

1.3.1 Technical Specifications

11

1.3.2 Performance Specifications

Power

AC 24V/3A（±20%）(Includes temperature control circuit)

Camera Driver
Consumption

11W

Decoder Built-in
Engine stepper motor
Preset 255( in PELCO protocol)
Auto Tour 8
Auto Pattern 5
Auto Scan 5
Privacy Mask Maximum 8 zones
Alarm Input/Output 7/2
Information Time, address, dome title, dome coordinates, temperature and

etc.

Lens Adjust speed in accordance with lens
Auto Rotation Tilt 92º auto rotates to pan 180 º
Auto Pan 0 º -360º continuously
Manual Pan Motion
Speed

0.1º—200º/S

Preset Maximum
Speed

60 º～300º/s. There are 16-level. You can set from the menu.

Manual Tilt Motion 0.1º—120º/S
Manual Tilt Scan
Section

0º—180º

Control Port RS485 BUS
Baud Rate 1200/2400/4800/9600 (Optional)
PTZ Scan Accuracy 0.06 ± 0.015º
Signal Format PAL/NTSC (Camera mode)
S/N Ratio > 50dB
Effective Pixel 768(H)*494(V) 795(H)*596(V)
Horizontal Resolution 480TVL/540TVL
Fan Fan works continuously.
Humidity

＜90%

Environment

-40℃—60℃（Outdoor）

12

Built-in
Decode

All digital design. All data are in the connection board. No data loss
when power off occurs.

z Integrated design, high stability.
z Quick installation speed dome max support 255 presets. Support 8

auto touring. Each touring max has 32 presets.

z 5 auto scan.
z 5 auto pattern. Each pattern can max support 400 commands and

the interval shall be less than 60s.

z Built-in direction indicator.
z RS485 BUS control.
z Support max 8 privacy mask zones(Depends on the camera type)
z 7 alarm inputs and 2 alarm outputs.
z Built-in various adjustable protocols, baud rate.

Built-in PTZ

z Fine stepper driver, stable performance, react quickly, precisely

positioning.

z Integrated design, tight structure.

z Elegant mechanical driver device. Support 360 degrees continuous

rotation, no monitor blind spot.

z 0.1°/s rotation speed while maintain stable image.

z 180 degrees tilt continuous monitor.

Built-in zoom
lens, high
sensitive,
high
resolution
integrated
digital
process
color
camera.

z Auto focus
z Auto iris control
z Auto brightness control
z Auto white balance
z Auto day/night switch (Auto B/W & color switch)

OSD

z Preset title display
z View dome initial setup information
z Modify camera parameter
z Set preset
z Set auto scan
z Set 7 alarm inputs and 2 alarm outputs.
z Set auto patter
z Set auto day/night switch (Auto B/W & color switch)
z Set privacy mask zones

13

2 Protocol, Baud Rate, Address setup

Before you operate, you need to set protocol, baud rate and address. Otherwise you can
not control the product!

2.1 Protocol and Baud Rate Setup

Please configure the following settings before begin controlling dome:

z Protocol

z Baud rate

z Address

Note: Please reboot the speed dome to get all the setups activated!

Open the lower dome, the interface is shown as below. See Figure 2-1.

The two dial switches of the quick installation speed dome are SW1 and SW2. These are to

specify the speed dome parameter such as protocol, baud rate, address and etc. When the

button is ON, it is 1. In the SW1 and SW2, 1 is the lowest bit and the 8 is the highest bit.

Please note this series speed dome cans automatically recognize the DH-SD, PELCO-D.
PELCO-P. usually you do not need to set the protocol.

Figure 2-1

Please refer to the protocol sheets for detailed information.

Protocol Baud rate Parity
1 2 3 4 5 6 7 8

1 2 3 4 Communication Protocol

OFF OFF OFF OFF

DH-SD （ Compatible with China

industrial standard protocol）

ON OFF OFF OFF PELCO-D

OFF ON OFF OFF PELCO-P

X X X X Reserved

Please refer to the baud rate sheet for detailed information.