Macally PHR-S250UAB, IEEE 1394B, IEEE 1394A User Manual

IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0

2.5” Hard Drive Enclosure

PHR-S250UAB

User’s Manual

CONTENTS

INTRODUCING FIREWIRE/

Software Installation for MasOS X 10.1.x to 10.7.x and above

FireWire Connection for MasOS X 10.1.x to 10.7.x and above
USB2.0 Connection for MasOS X 10.1.x to 10.7.x and above

IEEE 1394A and 1394B FireWire Connection for
WindowsXP/Vista/Windows7

3ERUSOLCNE DEEPS-IH 0.2BSU

3ediuG siht tuobA
3stnemeriuqeR metsyS
4stnetnoC egakcaP
4snoituacerP ytefaS

6CISAB ERAWDRAH

7 NOITALLATSNI ERAWDRAH

01NOITALLATSNI ERAWTFOS

01

01
01

11CP rof noitallatsnI erawtfoS

11

11P/Vista/Windows7X swodniW rof noitcennoC BSU

SATA HARD DRIVE PARTITION and

For WindowsXP/Vista/Windows 7

21CP ni SERUDECORP TAMROF

21

2

Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0

2.5" Hard Drive Enclosure-PHR-S250UAB

Thank you for choosing the PHR-S250UAB portable IEEE 1394A and 1394B
FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure. This portable size
enclosure support 2.5” SATA Hard drive. It is simple to install and comes with
all the parts you need to create a external IEEE 1394A and 1394B FireWire/
Hi-Speed USB2.0 device.

About This Guide

Before you begin using the PHR-S250UAB, be sure to read this manual in its
entirety.
This guide contains:

• Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0

2.5" Hard Drive Enclosure

• Hardware Installation

• Software Installation

System Requirements

For Mac

• Any Macintosh desktop or NoteBook computer with USB or
FireWire port ready

• MasOS X 10.1.x to 10.7.x and above

For PC

• Pentium II or compatible Desktop or Notebook with USB or
IEEE 1394A and 1394B FireWire port ready.

• WindowsXP, Windows Vista and Windows7

• USB2.0 port is required for Hi-Speed USB2.0 transfer speed

Using AC/DC Adapter (optional)

Basically, if you connect the PHR-S250UAB directly into built-in FireWire
or USB port, AC/DC adapter is not required. However

(1) if USB connection dose not response, or USB port is disable due

to power surge error message

(2) the PHR-S250UAB Enclosure is connected to a CardBus to

FireWire host adapter, or 4-pin iLink port AC/DC adapter is required.

3

Package Contents

The PHR-S250UAB portable IEEE 1394A and 1394B FireWire/Hi-Speed
USB2.0 2.5" Hard Drive Enclosure package includes the following software and
documentation:

• 6 pin to 6 pin FireWire Cable

• 9 pin to 9 pin FireWire Cable

• USB2.0 cable

• IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure

Safety Precautions

ON INSTALLATION

1. To reduce the risk of fire or electric shock, do not expose this
product to rain, water or moisture.

2. Do not place any containers with liquids (drinking glass, flower
vase, etc.) or containers with small metal parts (paper clips, etc.)
on top of the unit.

3. According to standard industry practice, surge protection is
recommended for all telecommunications devices. Surge suppressors
and/or line conditioning should be used on the input power supply.

ON OPERATION

• Do not move the chassis during operation. Doing so may cause
a malfunction.

• Protect the unit from shocks and vibrations.

• Do not use the subsystem in areas exposed to oily smoke or steam,

such as a kitchen or close to a humidifier.

• Do not use the subsystem in locations exposed to rain or splashes of
water, such as outdoors, in a bathroom, or close to a window.

• Do not use the subsystem on an unstable or slanted surface without
proper support.

• Do not expose the unit to direct sunlight or hot air where the
temperature could exceed 45ºC, or very cold locations where the
temperature is below 0ºC.

• Keep the power cord away from hot appliances.

• Do not touch the power cord with wet hands.

4

ON TRANSPORTATION

Save the packing materials as you may need to repack and transport the
unit at a later date.
Always remove the disc before moving the unit.

ON POWER SOURCES

When you are not using the unit for a long time, disconnect the power cord
from the unit.
To unplug the AC power adapter from the wall outlet, grasp the adapter
itself. Do not pull the cord.

Warning

If any of the following conditions occur, immediately disconnect the power
cord from the wall outlet and contact your dealer or an authorized service
station. Continuing to use the computer involves the risk of fire and electric
shock.

• Smoke or unusual smell is coming from the subsystem.

• Water has entered the unit, or the unit has become wet.

• A foreign object has entered the unit.

• The unit has been dropped or the front panel or frame has been damaged.

• The power cable is damaged, causing wire breakage or exposed leads.

5