Mac allister MLMP300HP46 Original Instructions Manual
V11017
MLMP300HP46
3663602939788
This le is the property of Kingsher Group Plc. No copying, alteration or amendment is permitted without
written authorisation from the Kingsher Brand Team.
V1.1
翠丰集团不会以专色(PMS)作参考，请参照已提供的印刷 标准及Lab色彩数值生产以符合印刷品之标准。
本文件的版权归翠丰集团所有。未经翠丰品牌团队的书面同意，不得对本文件进行复制、变更或修改。
PROCESS
BLACK
SEPARATIONS JOB INFO
VERSION #
PID #: 00001
Agency job #: SUME10979
Product Description: 46cm Hand-push
Rotary Lawnmower
Brand: Mac Allister
Brand Contact: jennifer.bliss@kingfisher.com
Barcode: 3663602939788
Vendor: Sume
No. of new line drawings: xx
Page size A5 / No. of printed pages 28
2 R 4 5 6 7 8
18/09/17TB02/10/17
DLS
26/10/17
DLS
00/00/17
INITIALS
00/00/17
INITIALS
00/00/17
INITIALS
00/00/17
INITIALS
00/00/17
INITIALS
1
Original instructions
Preparation
4
Assembly
11
Use
16
21
These instructions
are for your safety.
Please read them
thoroughly before
use and retain
for future reference.
x2
Unleaded
Petrol
SAE10W-30
Engine Oil
[02]
[01]
4
Preparation
4
Safety Information - General power tool
safety warnings
IMPORTANT! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
instructions for future reference. The term «power tool» in the
warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
01
Training
• Read the instructions carefully. Be familiar with the controls and the proper use of the product.
• Never allow children or people unfamiliar with these instructions to use the product. Local regulations can restrict the age of
the operator.
• Never mow while people, especially children, or pets are nearby.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
• The operators must receive proper training in the use, adjustment and operation of the product, including prohibited operations.
02
Preparation
• While mowing, always wear substantial footwear and long trousers. Do not operate the product when barefoot or wearing
open sandals.
• Thoroughly inspection the area where the product is to be used and remove all objects which can be thrown by the product.
WARNING!
•
• Refuel outdoors only and do not smoke while refuelling.
• Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the
engine is hot.
• If petrol is spilled, do not attempt to start the engine but move the product away from the area of spillage and avoid creating any
source of ignition until petrol vapours have dissipated.
• Replace all fuel tank and container caps securely.
• Replace faulty silencers.
• Before using, always visually inspect to see that the cutting devices, cutting device bolts and cutter assembly are not worn or
damaged. Replace worn or damaged cutting devices and bolts in sets to preserve balance.
55
CAUTION! Do not touch rotating cutting device.
• Engine brake (brake bar): Use the brake bar (2) to stop the engine. When you release the bar the engine and the blade stop
automatically in a few second. To mow, hold the bar in the working position. Before you start to mow, check the brake bar several
time to be sure that it is working properly. Ensure that the brake wire can be smoothly operated.
03
Operation
• Do not operate the engine in a conned space where dangerous carbon monoxide fumes can collect.
• Mow only in daylight or in good articial light
• Do not operate the product while being tired, ill or under inuence of alcohol or other drugs.
• Avoid operating the product wet grass, where feasible.
• Always be sure of your footing on slopes.
• Walk, never run.
• Mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
• Do not mow excessively steep slopes near drop-offs, ditches or embankments.
• Avoid using the product in bad weather conditions especially when there is a risk of lightning.
• Use extreme caution when reversing or pulling the product towards you.
• Stop the cutting device(s) if the product has to be tilted for transportation when crossing surfaces other than grass, and when
transporting the product to and from the area to be mowed.
• Never operate the product with defective guards, or without safety devices, for example deectors and/or grass catchers, in place.
• Do not change the engine governor settings or overspeed the engine.
• Do not alter or tamper with any sealed adjustments for the engine speed control.
• Do not tamper or disable any lawnmower safety systems or features.
• Ensure and regularly check that all starting interlocks and operator presence controls are properly functioning.
• Stop the product according to instructions in this manual before leaving the operator’s position and park it.
• Disengage all cutting device(s) and drive clutches before starting the engine.
• Start the engine or switch on the engine carefully according to instructions and with feet well away from the cutting devices(s).
• Do not tilt the product when starting the engine or switching on the engine, except if the product has to be tilted for starting. In this
case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator.
• Do not start the engine when standing in front of the discharge chute.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Never pick up or carry a product while the engine is running.
• Stop the engine and disconnect the spark plug connector, make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• before clearing boxes
• before checking, cleaning or working on the product
• after striking a foreign object. Inspect the product for damage and make repairs before restarting and operating
the product,
• if the product starts to vibrate abnormally (check immediately).
• Stop the engine and disconnect the spark plug connector, make sure that all moving parts have come to a complete stop and,
where a key is tted remove the key:
• whenever you leave the product,
• before refuelling
• Reduce the throttle setting during engine shut down and if the engine is provided with a shut-off valve, turn the fuel off at the
conclusion of mowing.
• Go slow when using a trailing seat.
• Never touch the exhaust, exhaust guard or cooling ns when the engine is hot.
• Never carelessly touch the product, you can burn yourself. While the product is in operation or shortly thereafter, its parts such as
the exhaust pipe, engine, and other surfaces are extremely hot! Pay attention to the markings on the product.
6
• Make sure that the air intake of the combustion engine is clear. Keep the air intake free of dust, dirt particles, gases and fumes.
Keep hands and feet away from the cutting device at all times and especially when switching on the engine.
04
Maintenance and storage
• Follow the maintenance and repair instructions for this product. Never carry out any modications of the product. Never change
the preset rotary speed or the engine and product settings. Information about maintenance and repair is provided in this
user manual.
• Keep all nuts, bolts and screws tight to be sure the product is in safe working condition.
• Improper maintenance or using non genuine parts may lead to malfunction/failure of the product. Many accidents are caused by
poorly maintained products.
• Never store the product with petrol in the tank inside a building where fumes can reach an open ame or spark.
• Allow the engine to cool before storing in any enclosure.
• Keep the engine, silencer and petrol storage area free of grass, leaves, or excessive grease to reduce the re hazard.
• Check the grass catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done outdoors.
• Wear strong work gloves when removing and re-assembling the cutting device.
• Always replace worn or faulty parts with the genuine parts. Only use the recommended blades and spare parts by
the manufacturer.
05
Fuel handling
• Always switch the product off and let it cool down, before refuelling it. Petrol is highly ammable. Never smoke when you are
refuelling the product. Do no refuel the product, if there is an open re in the vicinity!
• Always use suitable aids such as funnels and ller necks. Do not spill any fuel on the product or its exhaust system. There is a risk
of ignition. However, if fuel should be spilled, the you must remove it carefully from all parts of the product. Any residue which may
be present must be completely removed, before the product is operated!
• Exhaust gases and fuel fumes are noxious. Fuel fumes can ignite. Never use the product in environments where there is a risk
of explosion.
• Never breathe in any fuel fumes, when you are refuelling the product. Never ll the tank in enclosed spaces, such as basements
or sheds. There is a risk of poisoning and explosion!
• Avoid skin contact with petrol.
• Do not eat or drink, while you are refuelling the product. If you have swallowed petrol or oil, or if petrol or oil has got into your
eyes, then seek medical advice immediately.
• Close the tank lid immediately after lling the tank. Make sure that it is properly closed.
• Never use the product without an air lter.
06
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes
as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
• Only use the product as intended by its design and these instructions.
• Ensure that the product is in good condition and well maintained.
• Use correct attachments for the product and ensure they are in good condition.
• Keep tight grip on the handles/gripping surface.
• Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
• Plan your work schedule to spread any high vibration tool use across a longer period of time.
7
07
Emergency
Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them
to the letter. This will help to prevent risks and hazards.
• Always be alert when using this product so that you can recognize and handle risks early. Fast intervention can prevent serious
injury and damage to the property.
• Stop the engine and disconnect the spark plug connector if there are malfunctions. Have the product checked by a qualied
professional and repaired, if necessary, before you operate it again.
• In case of re stop the engine and disconnect the spark plug connector. Take re-extinguishing measures immediately if the
product switch is no longer accessible.
WARNING! Never use water to extinguish a product on re.
Burning fuel must be extinguished with special extinguishing
agents. We recommend that you keep a suitable re
extinguisher within reach in your work area.
08
Residual risks
• Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain.
The following dangers can arise in connection with the structure and design of this product.
• Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed
and properly maintained.
• > Injuries and damage to property due to broken application tools or the sudden impact of hidden objects during use.
• Danger of injury and property damage caused by ying objects.
• Burns, if touching hot surfaces.
WARNING! This product produces an electromagnetic eld
during operation! This eld may under some circumstances
interfere with active or passive medical implants! To reduce
the risk of serious or fatal injury, we recommend persons
with medical implants to consult their doctor and the medical
implant manufacturer before operating this product!
09
Symbols
On the product, the rating label and within these instructions you will nd among others the following symbols and abbreviations.
Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
kW Kilowatt kg Kilogram
cm³ Cubic centimetre dB(A) Decibel (A-rated)
/min or min-1 Per minute l Litre
mm Millimetre m/s² Metres per second squared
Lock / to tighten or secure
Unlock / to loosen.
mm.yyyy Manufacturing date code year of manufacturing (yyyy) and month of manufacturing (mm)
8
Note / Remark
Caution / Warning
Read the instruction manual
Wear hearing protection.
Wear eye protection.
Wear a dust mask
Wear protective gloves
Wear protective,
slip- resistant footwear.
Wear tight-tted
protective clothes
Do not expose the product to rain or wet conditions.
Open ames in the work area, around the product and in the vicinity of ammable materials
are prohibited!
Do not smoke in the work area, around the product and in the vicinity of ammable materials!
Risk of re / ammable materials
Hot surface, do not touch! High temperatures on the product’s surfaces and structural parts that
could cause burns, if they are touched. The product can also stay hot for a longer period of time
after operation!
This product produces noxious exhaust fumes. If the product is used improperly, these fumes
can lead to poisoning, a loss of consciousness or death!
Noxious exhaust fumes; do not operate or start the product in indoor rooms!
Only refuel unleaded petrol!
Add engine oil.
H
L
Check and rell oil.
Switch the engine off while you are relling the tanks! Fuel is ammable, keep re away. Do not
add fuel with running engine.
9
Switch the product off and disconnect the spark plug connector before assembly, cleaning,
adjustments, maintenance, storage and transportation.
Mow across the face of slopes, never up and down.
Inspect the area where the product is to be used and remove all objects which can be thrown by
the product.
If objects are hidden while operating stop the engine and remove the object.
Keep hands and feet away from sharp rotating parts – danger of injury! When cleaning,
repairing, or inspecting, make certain the cutting device and all mowing parts have
stopped. Disconnect the spark plug cap, and keep the cap away from the plug to prevent
accidental starting.
KEEP HANDS and FEET AWAY
Keep hands and feet away.
Cutting device continues to rotate after the product is switched off. Wait until all machine
components have completely stopped before touching the product.
Pay special attention when working on the cutting device!
Objects thrown by the product could hit the user or other bystanders. Always ensure that other
people and pets remain at a safe distance from the product when it is in operation. In general,
children must not come near the area where the product is.
STOP
Release the brake bar to stop the engine and blade.
Engine manual start; recoil starter.
Guaranteed sound power level value in dB.
The product complies with the applicable European directives and an evaluation method of
conformity for these directives was done.
MLMP300HP46 Designation of the tool (M_ Mac Allister brand; LMP_ Petrol lawnmower; HP_ hand push)
Loading...