mabe LMC0686XBBY, LMC1086XSSY0, LMC0886XBBY, LMC1086XBBY Service Manual

LMC0686XBBY
LMC0886XBBY
LMC1086XBBY
LMC1086XSSY0

SERVICE MANUAL

829 Series

Contents

Chapter 1 General Information ________________________________________________

1-1. General Guidelines_____________________________________________________

1-2.Quick reference sheet

________________________________________________

Chapter 2 Product Feature ___________________________________________________

2-1. Features _____________________________________________________________

2-2. Specification __________________________________________________________

Chapter 3 Matters needing attention ___________________________________________

3-1. Safety _______________________________________________________________

3-2. During Use ____________________________________________

Chapter 4 Operational Guidance ____________________________________________

Chapter 5 Program Introduction_____________________________________________

4

Chapter 6 Washing Mathods ________________________________________________

6-1. Loading____________________________________________________________

6-2. Adding detergent ____________________________________________________

6-3. Selecting washing program ____________________________________________

Chapter 7 Appearance brief introduction _____________________________________

7-1. Name of parts _______________________________________________________

7-2. Net dimension_______________________________________________________

Chapter 8 Disassembly and Installation ______________________________________

8-1. Remove packing materials _____________________________________________

8-2. Dismantle packing bolts _______________________________________________

8-3. Adjusting the washing machine _________________________________________

Front Load Washing Machine

SERVICE MANUAL

829 Series

8-4. Joining the Inlet Hose to the Washing Machine _____________________________

8-5. Drainage Hose ______________________________________________________

8-6. Connecting to the Power Supply ________________________________________

Chapter 9 Wiring circuit and Self check ______________________________________

9-1. Wiring circuit ________________________________________________________

9-2. Self check __________________________________________________________

Chapter 10 Error Display and troubleshooting _________________________________

10-1. Error Display _______________________________________________________

10-2. Examination & Troubleshooting ________________________________________

10-2-1. Display nothing__________________________________________________

10-2-2. No water inletting ________________________________________________

10-2-3. No draining _____________________________________________________

10-2-4. Abnormal noise and vibration_______________________________________

10-2-5. Water leaking ___________________________________________________

10-3. Parameter of primary eletronic appliance ________________________________

Chapter 11 Disassembly guide

___________________________________________________

Chapter12 Maintenance ___________________________________________________

Front Load Washing Machine

SE R VICE MANUAL

829 Series

Chapter 1 General Information

1-1. General Guidelines

When servicing,observe the original lead dress.If a short circuit is found, replace all parts which are
overheated or damaged by the short circuit.After servicing ,see to it that all the protective devices such as
insulation barriers ,insulation papers shields are properly installed .Confirm that the screws,parts and wiring
which were removed in order
which are deteriorated around the service places serviced or not. And be sure safety of that.

to service are

put in the original positions, or whether there are the portions

1-2. Quick reference sheet

1-2-1. Model name explanation:

LMC0686XBBY
LMC0886XBBY

LMC1086XBBY

LMC1086XSSY0

Front Load Washing Machine

SERVICE MANUAL

829 Series

Chapter 2 Product Feature

2-1. Features

(1). 320mm diameter porthole, door may be open at a 175 degrees.

Facilitate view of wash process, facilitate unloading and easy to use with large port.

(2). Class A energy-saving

Scientific design for tub can reduce the use of water heavy during washing, consequently upgrade the

energy efficiency class to A,also use scientific washing

(3). Multi-gear speed controller

According to different costuming you can select corresponding spin speed from 0 to 1400 rpm.

(4). Unique gasket design featuring no residual water hidden inside.

By the unique gasket washing machine can left no residual water hidden between outer drum and front

board.

(5). Delay time adjustive.

According to different costuming you can select delay time from 0.5h to 24h.

(6). motor

Front Load Washing Machine

SE R VICE MANUAL

829 Series

2-2. Specification

washing machines

1.

Product identification

LMC0686XBBY

Description of appliance
Type of appliance(FS = standing, BI = built-in)
Supplier own brand

Supplier bar code Europe

EAN

Commercial Brand / Model
Commercial bar code EAN

2.

Key-Features

Ener gy efficiency class
Washing performance class /
Spin efficie ncy class
Programs n°
Capacity kg
Spin speed (max.) rpm 1000 1200 1400

Noise level sound pressure level dB(A) /
Energy consumption per wash circle 1.120.951.90 hWk

lelcychsawrepnoitpmusnocretaW

47
Annual average energy consumption * kWh
Annual average water consumption* l
Residual dampness (spin result) %
Adjustable thermostat (water temp. adjust from - to) °C
Drum capacity dry laundry / water kg / l
Auto water level adjust (depending on volume of filled in laundry) AWL
Washing time (max.) 160 nim
Washing temperatures (program-controlled) °C
Certification's (CE)
Approvals (VDE/GS / GS / IMQ)
* per average 200 wash cycles (EN50242) T= COLD

3.

Basics data

850x595x410 850x595x550 850x595x600

mm)DxWxH(snoisnemidtinU

Net weight kg

60
Voltage/frequency V/Hz 220V-240V~ 50Hz
Input power / main fuse (intensity) W / A 2050/10
Work top / removable ll
Control M = electromechanical, E = electronic, F = fuzzy E
Drum S = stainless steel / Z = zinc coated S
Tub P = Polyprop./ S = stainless steel

Door:

aesthetic (R = round, Y = big eye, Q = square) R
Diameter 47 mc
Outer door frame S = stainless steel / M = metal / P = plastic P
Inner door G= glass / P= plastic G
Detergent compartments 3 °n
Removable compartment for liquid detergent
Delay timer (from - to) h
Self cleaning suds pump
Water inlet hose cold water / hot water /-
Water drain hose / -support
Adjustable feet n°

4.

Safety s ystems

LMC0886XBBY

Washing machine

FS

mabe

mabe

HAIER

/

B

14

8

55

/
/
/

/
/

20-90

/

CE/GS

70 74

P

-

0.5-24

-

/

4

LMC1086XBBY
LMC1086XSSY0

106

56.7

90 -

Front Load Washing Machine

SERVICE MANUAL

Auto door lock
Motor overheating protection
No heating without water
Auto water cool-down (before drain 90°C boiled water)

Water overflow protection

ADL
MOP
NHW
AWC

WRP

Acqua Stop kit - ­Child protection

5.

Programs

1)Cotton

2)Synthetic

3)Mix

4)Wool

5)Under wear

6)Sport

7)Jeans

8)Hygienic

9)Fast

10)Express 15 min

11)Daily wash

12)Baby care

13)Delicate/Silk

14)Hand wash

15)Self Clean

(90°C/60°C/40°C/30°C/20°C )

(60°C/40°C/30°C/20°C )

(60°C/40°C/30°C/20°C )

(40°C/30°C/20°C )

(60°C/40°C/30°C/20°C )

(40°C/30°C/20°C )

(60°C/40°C/30°C/20°C )

(90°C/60°C/40°C/30°C/20°C )

(40°C/30°C/20°C )

(40°C/30°C/20°C )

(60°C/40°C/30°C/20°C )

(90°C/60°C/40°C/30°C/20°C )

(30°C/20°C )

(30°C/20°C )

(90°C )

Optional function keys (additional program settings)
ON/OFF
Start / Pause
Delay
Extra Rinse
Intense
Eco Time
Spin Select
Temperature Select
Baby Care
Cold wash
Super Wash
Pre-wash
Easy ironing

Packing dimensions & loadability

mm)DxWxH(snoisnemidgnikcaP

6.

Gross weight kg
40' Container load pcs

Logistic / recicling information

Packing weight kg

7.

Packing materials / Recycling symbols

Carton gr

(weight)
Polistyren (weight)
Polyetylene foil (weight) gr
Other packing materials (weight)
Wood

(weight)

Service

User instruction (languages)

8.

Max. failure rate (12 Months after sales to end customer) %

Delivery Time of First Batch Available

n°
n°
n°
n°
n°
n°
n°
n°
n°
n°
n°
n°

n°

n°

n°

- -

-

-

-

-

890*650*515

gr

890*650*650 890*650*695

Shrink package

1500

200

gr
gr

RS

300

-

-

-

-

7563

78

9.

Front Load Washing Machine

SERVICE MANUAL

829 Series

Chapter 3 Matters needing attention

3-1. Safety

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision. Children of
less than 3 years should be kept away unless continuously supervised.

BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME

DO ...

... Make sure that the transportation bolt(T1,T2&T3) are

removed.

... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when unplugging

power supply.

... Make sure that the fuses in the power circuit are rated for

15A (European type)/ 16A (Israel type).

... Keep away from heat sources and direct sun light to

prevent

plastic and rubber components from aging.

... Make sure that the power cord is not caught under or in the

appliance and avoid damage to the power cable.

... Check that hose joints and connections are firm and no

can leak. If joints are loose or there is leakage,
water supply and refix. Do not use the

hoses are properly fixed.

the

washing machine

turn off the

water

until

DO NOT ...

... Touch or use the appliance when barefoot or with wet or

damp

hands or feet.

the

... Use flammable detergent or dry cleaning agent.

... Use any flammable sprays in close vicinity to the

... Remove or insert the plug in the presence of flammable

... Allow children or infirm persons to play with the appliance

packing materials.

Front Load Washing Machine

appliance.

gas.

or

SERVICE MANUAL

829 Series

... Remove or insert the plug in the presence of flammable

... Allow children or infirm persons to play with the appliance

packing materials.

gas.

or

3-2. During Use

DURING DAILY USE OF THE APPLIANCE

DO ...
... Pull up zips and fix loose threads to prevent the items from being

entangled. If necessary, put small items into

... Turn off the machine after each wash program and switch

a net bag or pillow.

it off at

the mains to save electricity and for safety. Wipe clean the lower

part of

... Keep the door slightly open when the washing machine is

the porthole.

not in

use to prevent formation of odours.

... Let the power cord be replaced by the manufacturer, his

agent or other accordingly qualified persons, in

case it is damaged.

service

DO NOT ...

... Touch the washer door during the washing process - it

... Place heavy objects or sources of heat or damp on top o

gets hot!

f

the app-

liance.

... Hot wash foam rubber or sponge-like materials.

... Open the detergent distribution drawer during the wash cycle.

Force the washer door open. The door is fitted with a self-lock

...

device

and will open shortly after the washing procedure is ended.

Open the washer door if the water level is visibly over the

...

porthole.

... Cover the washing machine with plastic cover so that inside dampness

cannot be kept in.

Front Load Washing Machine

SE R VICE MANUAL

1

2

1 2 3 8 4 5 7 6

Algodón

Cotton

Cotton

Cotton

Algodón plus

Cotton+

Cotton+

Cotton+

Sintéticos

Synthetic

Synthetic

Synthetic

Mezclados

Mix

Mix

Mix

Vaqueros

Jeans

Jeans

Jeans

Ropa

Sport

Sport

Sport

deportiva

Lana

Wool

Wool

Wool

Encendido

Power

Power

/ Apagado

Power

9

HW60-14829

HW70-12829

HW80-BP14636

HW100-B14636

Express 15 min

Express

Express

Express

15min

15min

15min

Rápido

Fast

Fast

Fast

Delicate/

Delicate/

Delicate/

Delicados

Silk

Silk

Silk

Lavado

Hand

Hand

Hand

°C

90

wash

wash

a mano

wash

°C

60

Higiénico

Hygienic

Hygienic

Hygienic

°C

40

Cuidado

Babycare

Babycare

Speed Intense

Temp.

Speed Intense

Temp.

R

R

Programa

Program

Program

Program

Extra rinse

Extra rinse

Babycare

Centrifugado

Spin

Spin

Inicio /

Start/

Start/

Start/

Pausa

Pause

Pause

Pause

infantil

Spin

Temp.

Temp.

Delay

Delay

°C

30

°C

20

Centrifugado

Start/Pause

Start/Pause

Vel.

Spin

Spin

Spin

speed

speed

speed

Fin

DelayTemp.

Delay

Diferido

DelayTemp.

Aclarado

Extra

R

Self Clean

HW80-14829

BLDC motor

+++

+++

1400

6kg

1200

7kg

A

A

+++

Clase

8kg

1400

A

Energy

energética

rpm

Capacidad

rpm

Capacity

CapacityrpmEnergy

+++

10kg 1400

A

+++

8kg

A

Energy

Capacity

rpm

Auto weightCapacityEnergy

1.

2.

3. Program

4. Wash Temp

6.

Extra Rinse

7.

Delay

8.

9.

LED Display

5. Spin Speed

Oper onal Func ons

Nº Func on Explica on

1 Detergent

Drawer

2

3

Open the drawer, three compartments can be seen:
Compartment 1: Water inlet only,no detergent
Compartment 2: Detergent for programs 1 to 13.

for the various washing temperatures, please refer to the
manual of detergent.

counterclockwise

clockwise

the correspondding light will illuminate.

Wash Temp

4

indicator. Select a temperature according to the type of laundry.Note: If there
is no indicator light displayed, this means cold w ash.

Spin Speed

5

will be displayed on the indicator.Note: If there is no indicator light displayed,
this means no spinning.

Di

erent water temperatures and spinning speeds can be set for

special requirement.

8

Front Load Washing Machine

829 Series

11

6

7

Extra Rinse

Delay

disappears when the extra rinse ends.

the washing machine will start the wash program directly.

15

8

9

Start/Pause

LED Display

When the washing machine is connected to the power socket and a

screen start blinking, press the Power switch, the program will be cancelled.

accordingly. When the laundry is not balanced during spinning, the

SERVICE MANUAL

829 Series

Chapter 5 Program Introduction



1 Detergent compartment for prewash mode

2 Detergent compartment

P r ogramme Temp. Preset re

n

c

3 Mix

4 Wool

6 Sport

7 Jeans

8 Hygienic

9 Fast

10 Express 15 min

0-90° C 30°C h

0-60°C 30°C Chemical

0-60°C 30°C

0-40°C --- Woolen

0-40°

C 20°C wear

0-60°C 30°C

90°C

90°C n

0-40°C 40°C

0-40°C --- h

2 3 1

Sports

Jeans

n

Type

Preset Spin Speed

1000 rpm

1000 rpm

1000 rpm

800 rpm

800 rpm

1000 rpm

1000 rpm

1000 rpm

1000 rpm

40-60°C 40°C s

re

13 Delicat

e/Silk

14 Hand Wash

16 Spin

Yes

0-90°C 40°C h

0-30°C 30°C Silk

0-30°C 30°C s

--- ---

Front Load Washing Machine

---

No

1400 rpm

1000 rpm

400 rpm

800 rpm

1000 rpm

SERVICE MANUAL

829--- Series

Chapter 6 Washing Mathods

6-1

6-2

6-3

Front Load Washing Machine

SE R VICE MANUAL

Chapter 7 Appearance brief introduction

Before Use

7-1. Name of parts

Descrip on

This diagram may be slightly nt from the layout of the washing machine you have just
purchased.

Drain hose

Express 15 min

Algodón

Express

Cotton

Express

Cotton

Express

Cotton

15min

15min

15min

Rápido

Algodón plus

Fast

Cotton+

Cotton+

Fast

Fast

Cotton+

Delicate/

Delicate/

Delicate/

Delicados

Sintéticos

Synthetic

Synthetic

Silk

Silk

Synthetic

Silk

Lavado

Hand

Hand

Mezclados

Mix

Mix

Hand

Mix

wash

wash

a mano

wash

Vaqueros

Higiénico

Hygienic

Jeans

Hygienic

Jeans

Hygienic

Jeans

Cuidado

Ropa

Sport

Babycare

Babycare

Sport

Speed Intense

Extra rinse

Temp.

Extra rinse

Speed Intense

Temp.

Babycare

Sport

infantil

deportiva

Centrifugado

Lana

Spin

Wool

Spin

Wool

R

R

Spin

Wool

Encendido

Inicio /

Start/

Start/

Programa

Start/

Power

Program

Power

Program

/ Apagado

Pausa

Power

Program

Pause

Pause

Pause

R

°C

90

°C

60

°C

40

Delay

Start/Pause

Delay

Start/Pause

°C

30

°C

20

Vel.

Aclarado

Fin

Spin

Spin

Temp.

Spin

DelayTemp.

Temp.

Delay

Centrifugado

Extra

Diferido

DelayTemp.

speed

speed

speed

Self Clean

1. Detergent/Softener drawer

2. Control panel

3. Worktop

4. Rating plate

5. Service flap

6. Adjustable feet

HW60-14829

HW70-12829

HW80-BP14636

HW100-B14636

HW80-14829

BLDC motor

+++

+++

1400

6kg

1200

7kg

A

A

+++

Clase

8kg

1400

A

rpm

Capacidad

rpm

Capacity

Energy

energética

CapacityrpmEnergy

+++

10kg 1400

A

+++

8kg

A

Energy

Capacity

rpm

Auto weightCapacityEnergy

Water inlet valve

Power cord

Back cover screws

Back cover

T3

T1

S1

S2

T4

S4

T2

S3

Preparing the machine

Remove all the packing materials to prevent unsteadiness, including
the polystyrene base. Upon opening the package, water drops may be
seen on the pla

ng from water tests in the factory.

resul

bag and the porthole. This is normal phenomenon

Front Load Washing Machine

e

n

S

V

I

A

ANU

7-2. Net dimension

410/550/600

595

LMC0686XBBY
LMC0886XBBY

LMC1086XBBY

LMC1086XSSY0

Height:850mm / Width:595mm / Depth:410mm
Height:850mm / Width:595mm / Depth:550mm

Height:850mm / Width:595mm / Depth:600mm

Height:850mm / Width:595mm / Depth:600mm

Front Load Washing Machine

SERVICE MANUAL

829 Series

Chapter 8 Disassembly and Installation

8-1. Remove packing materials

8-2. Dismantle packing bolts

8-3. Adjusting the washing machine

Front Load Washing Machine

829Series

SERVICE MANUAL

829 Series

Chapter 9 Wiring circuit and Self check

Front Load Washing Machine

SERVICE MANUAL

Addition

829 Series

Chapter 9 Wiring circuit and Self check

9-1. Wiring circuit

blue

JK2

CN 1

CN 2

red

blue

black

pink

red

red

blue

black

green

white

blue

grey g rey

MR L

MR N

MR C

brown

L0

N0

blue

brown

blue

L

Filter

N

JK1

CN 3

brown

blue

red

red

red

GN D

P

5V

WL

green

M1

M3

pink

M4

purple

black

M5

brown

M6

red

M7

blue

M8
M9

white

M10

Washing

Main

Rinse Soften Spin

CYCLE

STEP
NOTE

Cotton
Synthetic
Mix
Wool
Cotton+
Sport
Jeans
Hygienic
Fast

Express 15 min

Baby Care
Delicate/Silk
Hand Wash

Spin × ×

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

NOTE

×

×

Optional cycle

Water Supply : W.S Disentangle : D.T

The actual program time can be varied with the load amount and water temperature.
Basic time is minute in washing chart.

Note The heating time can be varied with the selected water temperature .

The heating starts at the same time of washing.

Basic cycle

Front Load Washing Machine

SERVICE MANUAL

20

829 Series

9-2. Self check

Self check

1.How to start
Press the “Power” button, the LED will light,

“Delay” button

“

” and all the

at the same time, then wait for about 3 seconds, the LED will display

light will light.

Press the "Extra rinse" key once to enter the machine model detection.

Then press the "Extra rinse" key once to enter the version number detecting Haier.

2. Test item

1). Press the "Extra rinse" the third time to enter "
the water level sensor alarm FA, the water level sensor alarm F3.

2). Press the "Extra rinse" the fourth time to enter "

mode to observe whether the water tank detergent box water inlet water.

3).Press the "Extra rinse" the fifth time to enter "
to observe whether the detergent box storage tank at the water inlet.

and then press the “Temp.” and

" sensor mode. If the problem,

" main wash valve detection

" softener valve detection mode,

4). Press the “Extra rinse” the sixth time to enter “

”, the machine test end.

Model selection

1.Press the power and extra rinse button and then put the plug in to the socket at the

same

time for 4 seconds, and it will enter the model-se

lecton model.

2.The default display shows 08 . Press the program button to choose 00/
01/02/03/04/05/06/07/08

the mode can be storage. The

till the needed model. Then press the start/pause button and

model can not be changed after storage.

3.If you want to change the model again after storage, you can cut off the NTC and

do the cycle adjustment.

you should choose 08.

4.Model

Model

Model

LMC 0686XBBY

LMC 0886XBBY

LMC1086XBBY/

，

you should choose 09.

，

you should choose 12.

LMC1086XSSY0

，

5.Press On/Off button gently for 2 seconds to switch off

soft touch sensitive.

Front Load Washing Machine

the machine as buttons are

SERVICE MANUAL

829 Series

Chapter 10 Error Display and troubleshooting

10-1. Error Display

Y

Is the exprot vlotage of PCB to door lock
between AC 220-240V?

Front Load Washing Machine

SERVICE MANUAL

829 Series

Disconnect the two black wires from PCB,
is the resistance between the two black

Cut off power,check the resistance of two
pins of heater element between 28 and
35

Front Load Washing Machine

SERVICE MANUAL

636 Series

Open the tap or wait for normal water
pressure to use.

Is the dispenser entering water?

Front Load Washing Machine

SERVICE MANUAL

636 Series

Reconnect well.

Switch on the power and look if the light
on the PCB flash every 0.5 seconds.

Is the pipe connected to the water level
sensor folded?

Is the pipe connected to the water level
sensor jammed?

N

Replace the PCB.

Without starting but electrifying,is the
import voltage of inlet valve between
AC 220-240V?

Front Load Washing Machine

SERVICE MANUAL

829 Series

Without power. Is the line of water level
sensor connected well ?

N

Without power. Is the line of PCB connected
well?

N

Switch on the power and check if the export
voltage from PCB to water level
sensor is 5V?

C heck if the ligh ts o f th e m otor

are sh in in g .

Y

C heck if the m o tor com m u nicatio n

lin es are con n ecte d pro pe rly.

Y

Connect the line well

Connect the line well

Change the PCB.

N

N

Ch eck th e m otor lin es an d

reactance line s,m ake sure the y are w ell inserted .

M ak e sure the co m m un icatio n lin es are w ell

in serted .

Error of the m otor ,need to cha ng e th e

m otor.

C heck if the lig h ts o f th e po w e r bo ard

are shinin g.

Y

C heck if the po w er b oa rd com m u n icatio n

lin es are conn ecte d p ro pe rly.

Y

Error o f the p o w er board,ne ed to cha n ge the

po wer bo ard.

N

N

C heck the p owe r b o ard lin es an d

reactance lines,m ake sure th ey are w ell in se rted.

M ak e sure th e co m m un icatio n lin es a re w ell

in serted .

Front Load Washing Machine

SERVICE MANUAL

829 Series

10-2. Examination & Troubleshooting

10-2-1. Display nothing

Press power button,Is there 220-240V
AC voltage between L port and N port
of the filter?

10-2-2. No water inletting

Check if water is leaking washer
connection

Y

Y

Y

Y

Front Load Washing Machine

SERVICE MANUAL

829 Series

10-2-3. No draining

10-2-4. Abnormal noise and vibration

Troubleshooting:

Is the pack screws dismantled?

Y

Is there foreign material in the washer ?

N

Is washer in balance?

Y

Is belt loose or worn?

N

Remove belt and turn belt pulley by hand,
and then check if there is different noise

N

Turn on power and set spin program,
then start check if there is different
noise from motor

N

Y

N

Y

Y

Y

Dismantle the screws

Clean

Adjust adjustable feet

Replace it

Dismantle triangle and

check the bearing. If it is
broken, replace it.

Replace motor

10-2-5. Water leaking

Front Load Washing Machine

SE R VICE MANUAL

Troubleshooting:

Check if water is leaking from the inlet pipe
or the tap

N

Is drain pipe broken

N

Check if there is foreign material nipped
between cushion of s ight window and
sight window

N

Check if all tubes and tie-in is leaking
water, including the connecting of tube
and valve, dispenser, tube and dispenser,
outer cylinder-cushion of sight
window-hose and outer cylinder, drain
pump and gas valve

N

Is cushion of sight window broken?

N

Readjust it

Y

Y

Y

Y

Y

Replace drainpipe

Remove clothes

Reassembl e or repair

Replace outer cylinder

Is water leaking from outer cylinder?

10-3

10-3-1.Water heater

Heater
voltage 230V

s 1800W

wa
resistance 29

±5%

Front Load Washing Machine

SERVICE MANUAL

829 Series

10-3. Parameter of primary electronic appliance

29

10-3-2.

Water inlet valve

Electromagne c valve
voltage 220V 50/60Hz
resistance 4KΩ

10-3-3.Door lock

2

1

Door lock
voltage 250V
Amp. 16(6)A

resistance

Pin 2—3 :198Ω; Pin 1-2:

2

1

3

2

3

∞

， 1-3:

1

∞

3

Front Load Washing Machine

SERVICE MANUAL

829 Series

Chapter 11. Disassembly guide

Attention:

1. Pull out the plug before disassembly.

2.Keep the wire away from sharp stuff,avoid any brokage of isoluation protector
therefore avoid creepage.

3.Collect screws,accecoories and keep them in difference place,avoid missing
parts so that the technicians could reassemble them.

30

no.

1

2

3

4

Tools

Screw driver

Plier

Spanner
Sleeve 13/15

Multimeter

Picture

Front Load Washing Machine

SERVICE MANUAL

829 Series

Dismantle the electromagnetic valve

31

Dismantle the lower plaque

Dismantle the door

Front Load Washing Machine

SERVICE MANUAL

829 Series

Dismantle the motor

32

Front Load Washing Machine

SE R VICE MANUAL

829 Series

Chapter 12 Maintenance

Front Load Washing Machine

SERVICE MANUAL

829 Series

Codes Causes

E1

E2

6 minutes.

Door is not properly shut.

Clean the filter and check the drain hose

contact the maintenance personnel.

Shut the door properly, and then press

the

34

F3 Temperature sensor not properly

connected or damaged.

F4 Heater error (Appears at the end of a

cycle).

E4 Water level not met in 6/8/10 minutes.

The height of the drain hose is below 80
cm.
The drain hose is in water.

rorrE rotoM F7

E8

Contact the maintenance personnel.
FA
FC1

FC2

End

19:30

1:25
UNb

Water level sensor error.

board and motor

board and power board

End of wash cycle.

Washing machine has an unbalanced load

weight is greater than allowable maximum,
the washing machine will not spin and will

and noise

Contact the maintenance personnel.

Contact the maintenance personnel.

Make sure that tap is turned on, and water
pressure is normal.

maintenance personnel.
Install drain hose within 80-100 cm of
height.
Make sure the drain hose is not in water.

1.In case washing 1 piece of laundry(carpet,
bed sheet,table sheet,ect) make it
symmetrical inside the drum.

2.Lower the wet weight of laundry pieces
by wringing manually and placing them

.lennosrep ecnanetniam eht tcatnoC

.lennosrep ecnanetniam eht tcatnoC
.lennosrep ecnanetniam eht tcatnoC

.lennosrep ecnanetniam eht tcatnoC

piesces inside the washing machine in a

ofr the drum.

4.Add 1 or 2 pieces of laundry into the durm

knobs. To unlock press the " " and

Temp.

to reduce the unbalanced load effects.

5.Restart the spin cycle by cloosing spin
programme.In case the failure persists,
please ask a qualified technician to repair it.

6.Select a lower spin speed, and if OK then
select Spin program and a higher spin speed.

Temp.

Intense

Intense

case of abrupt power failure or the need to cut o power

resume when the power is on again.

program selector again to choose another

program.

During the spin process, if too much foam is inspected, in order to protect the motor, the

Front Load Washing Machine

SERVICE MANUAL

829 Series

Trouble-Sho

Problem Causes Solu ons

35

Washing machine fails to operate.

Washing machine c
with water.

Machine is draining while being

Drainage failure.

Power failure.
The washer door is not properly closed.
Machine has not been switched on.

Water tap is not turned on.
Water pressure is less than 0,03 MPa.
The inlet hose is kinked.
Water supply failure.
The program knob is not properly set.
The washer door is not properly closed.

The height of the drain hose is below
80 cm.
The drain hose is in water.

Drain hose is blocked.
Drain hose end is higher than 100 cm
above

ter is blocked.

removed.
Washing machine is located on an uneven
surfaceor is not level.
Machine load is over 6/8/10kg.

ter is blocked.

vel.

Check the power supply.
Close the washer door properly.
Make sure the machine is switched on.

P
Turn on the water tap.
Check water pressure.
Check the inlet hose.
Ensure the water supply.
Set the program knob properly.
Close the washer door properly.

Install drain hose within 80-100 cm
of height.
Make sure the drain hose is not in
water.

Unblock the drain hose.
Make sure the drain hose end is lower
than 100 cm abov

ter.

Make sure the washing machine is on
an even surface and levelled.
Reduce amount of laundry in the
drum.

ter.

vel.

wash cycle.

Excessive foam in the drum, which is

Spinning fails

Water or electricity failure.

Washing machine gives an error message.
Washing machine is in soaking cycle?

The detergent is not a low-foaming type or
for manual wash.
Excessive use of detergent.

adjusted

Unbalance of the laundry

Check the power supply or water
supply.

Check display codes.

Check if your detergent is appropriate.

Reduce amount of detergent in the

This is normal and doesn't a ect the

Add clothes or run a spinning
program again.

Front Load Washing Machine

V

I

A

W

829 Series

ANU

Sincere Forever

FrontLoad

ashing

achine