M3 Mobile SM10 Quick Manual

www.m3mobile.co.kr

SM10

Ver.1.0

Quick Manual

01

▪ Please check all items below are included in package box.

※ Warning

Use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiation exposure.

< Micro-USB Cable >

< Adaptor >

< Battery >

< M3 SM10>

PACKAGE

02

DEVICE

1

2

3

4

5

6

7

8

9

10

19

21

20

14

15

16

17

18

11

12

13

22

FEATURES

1.

3. Screen

5.

6. Menu Button

7. Charging Contacts

Receiver 9.

10.

11.

12.

13.

14.

Volume Button

Scanner Button

Micro-USB Connector

Battery Cover

Camera Button

Camera2.

4.
Microphone

Function Button

Home Button

Back Button

Sensor

Charging LED

17.

18.

Scanner Button

Ear Jack Hole

Scan Window

Camera
Speaker

Power Button19.

20.

21.

22.

8.

15.

16.

03

•

Button

•

Home Screen

If the device is turned on, the following screen will be displayed.

The screen is divided into four sections as follows:

Status BarNotication Bar

Home Screen

Dock Bar

DescriptionButton

Scanner Operate the scanner while executing the scanner program.

Volume High Increase the volume.

Volume Low Decrease the volume.

Camera Take pictures while executing the camera program.

Back Return to the previous stage.

Home Go to the Home screen.

Menu Display the menu.

Execute the work set to the button.Action

FEATURES

KEYPAD

04

Press and hold the Power button to

display the power management menu. Select the

For factory reset, perform the following procedure.

•

SOFT RESET (1)

FACTORY DATA RESET

If a serious problem occurs in the device or a problem is not resolved

through soft reset, perform factory reset.

According to the options, the document in the internal SD card or the

Micro-SD card may be deleted. As such, please check the options.

All settings will be reset.

Tap Backup & reset

→ Factory data reset →

“Power O and Restart” menu.

If the device stops its operation for a long time,

and the data or le being used will also be

deleted. However, the stored data or le will

The program being executed will end, and

not be aected by the soft reset.

press the Volume Down button + the Back button

+ the Camera button to perform soft reset.

Chek if Erase internal SD-Card is checked →Reset Phone→Erase everthing

SOFT RESET (2)

RESET

•

05

CARD INSTALLATION

Inserting the SIM Card

• To insert the SIM card, remove the battery cover on the rear of the device

• Either the front or back of the SIM card can be connected to the dual slot.

Inserting an External Memory Card

•

The Micro-SD card is used as an external memory of M3 SM10.
After removing the battery, insert the SD memory card into the
Micro-SD card slot.

Micro-SD Card

SIM Card

SIM

ONLY

SAM

SIM

아래 위

DEVICE SETUP

and pull out the battery.

06

BATTERY

▪

▪

※

Caution

If an unapproved battery is used, it may explode.

Check if the battery is inserted in the right direction.

Inserting the Battery

• Insert the battery from the bottom in the right direction.

• After inserting the battery, slide the Slide button to the left to x the

Removing the Battery

locking device.

DEVICE SETUP

07

Charging the Battery

• Use a portable adaptor to connect with the micro-USB port to supply

CHARGING

Description

LED Color

Battery is being charged.

Red

Battery is fully charged.

Green

※ Caution

Use only an M3 Mobile-approved adaptor. If not, the device may malfunction or

be damaged during or after its charging, or the battery performance may degrade.

• Alternatively, you may connect the device to a cradle that you can additionally

DEVICE SETUP

external power.

purchase to charge the battery.

08

•

Place the device toward to the barcode desired, and press the Scan button.

The laser beam of the scanner should completely cover the bar code as shown

SCANNER

※ Warning

If the device is used for purposes other than that described in this manual,

DATA CAPTURE

in the following.

<1D Scanner>

<2D Scanner>

Do not look at the laser beam directly.

a user may be exposed to harmful electromagnetic waves.

(Class 2 Laser product 1.0 mW, Max Output: 650 nm)

09

Taking pictures

• Run the Camera program.

• Tab the Capture button to take a picture.

Taking videos

• Run the Camera program.

• Tab the Video Mode button to take a video.

CAMERA

※ Warning

It may cause signicant damages to your eyes if you directly look the

ash attached at camera module.

Connecting with the NFC Device

• Open a Web page or the screen of a video, photo, or contact.

• Place the back part of the NFC device toward the back of the M3 SM10.

Connecting to the NFC Chip / Tag Card

• Hold the M3 SM10 as shown below. Do not cover the antenna area of the

• Place the M3 SM10 near the NFC chip or tag card until the data transfer is

• Touch the screen. Data transfer would then start.

completed. (Generally, data is displayed in the application.)

DATA CAPTURE

NFC

battery cover with your hands.

010

Should you require any services or technical support on M3 Mobile’s
products, contact your supplier or visit M3 Mobile technical support web
page.

Desired or relevant manuals can be downloaded from Manuals or FAQ
in technical support webpage. User manual, especially, is included

For DOA or RMA, please send the defective product to suitable address
AFTER consulting the supplier.

TECHNICAL SUPPORT

Technical Support Website: http://itc.m3mobile.net

The M3 Mobile can distribute a new OS to improve the quality

and performance of a product.

The latest OS is described in the online support page of M3 Mobile.

The OS of M3 SM10 can be updated through two methods:

For detailed information on OS update, please refer to the the “OS” item of the

M3 FAQ (FAQ download).

OS UPDATE

i. Use the Micro-SD card.

Connect the device through USB cable.ii.

SERVICES AND SUPPORT

in Flash Disk so that M3 T users can obtain it from the Flash Disk as well.

Copyright©2013 M3 Mobile Co., Ltd. All Rights Reserved.

Production Center/Service Center

Chun-ui Techno Park 2, 1-604,
Chunui-Dong, Wonmi-Gu,

Bucheon, Gyunggi-Do,

420-857, Korea

Tel: [phone]

Fax: [phone]

Headquarter

M3 bldg., 735-45,
Yeoksam-Dong, Gangnam-gu,
Seoul, 135-080, Korea
Tel: [phone] (Ext.4)
Fax: [phone]
www.m3mobile.net
[e-mail]