Lynx SMART42LP, SMART36NG Quick Guide

SmartGrill by Lynx

™

Quick Start Power Connectivity

& Wi-Fi Setup Process**

STEP #1—REQUIREMENTS

• Smart device (phone or tablet)

• 110 volt GFIC outlet at the grill

• Proper gas supply

• Home network name (SSID) & password

Name: ____________________________________________

Password: _________________________________________

™

• SmartGrill by Lynx

Serial number: _____________________________________

PIN: _______________________________________________

*Located on the top of the CPU case.

serial number/PIN*

iPhone 5 or greater or
iPad version 2.0 or greater

Android 4.4 or greater

STEP #2—SETUP YOUR SMARTGRILL

• If not already done, locate the 6 wire connections inside the grill

and attach them to the SmartGrill computer case. Each cable is

labeled to coincide with the port on the SmartGrill computer.

Please be sure to connect the cables as per labeling on cable

and computer.

• Locate the antenna in the white box inside the grill and screw

into the back of the SmartGrill computer case.

• Plug the power cable from the SmartGrill into a 110v GFIC

electrical outlet.

• Wait 20-60 seconds to hear SmartGrill say “SmartGrill is ready.”

STEP #3—DOWNLOAD AND SETUP THE SMARTGRILL APP ON
YOUR PHONE OR TABLET AND CREATE YOUR ACCOUNT

• Go to iTunes or Google Play and download “SmartGrill by Lynx” and install

• Open the SmartGrill App and click Create Account then enter your grill serial number and PIN

then click Continue.

• Enter your email address, password and your registration information and click

Create Account. You will get a confirmation email.

• Open the confirmation email and follow instructions to activate your account.

• Now login to the SmartGrill app by entering your email and password.

**For most current version of the Quick Start Guide, please refer to your app or our website at www.lyngrills.com. P/N 35407

STEP #4—SETUP Wi-Fi CONNECTIVITY

A. On your Phone or Tablet, verify

that you have at least 60% wireless

signal at your SmartGrill.

B. On your SmartGrill, press the power button and wait about 30

seconds for the SmartGrill to say “SmartGrill, at your service”.

C. On your phone or tablet, switch to your Wi-Fi settings and

locate the wireless network called SmartGrill xxxx (xxxx is the

last four digits of your serial number) and connect to it. The

password is lynxgrill.

D. Now go back to your SmartGrill App and

go to the Resources icon, then

My Smart Grill

SmartGrill Wi-Fi Setup

Wait 10-20 seconds for the wi-fi setup menu.

60% or better

Resources

E. Click on the SSID and enter the password for your home

network (information in STEP #1—REQUIREMENTS) then

select DONE. After 20-60 seconds, your SmartGrill will say

“SmartGrill is connected to the internet”, and your wireless

configuration is complete. Now just power the SmartGrill off,

then back on. SmartGrill will say “SmartGrill connected to

the internet” followed by “SmartGrill at your service.” On the

SmartGrill app click on the Grill icon and now your SmartGrill

is connected and ready to grill.

STEP #5—CALIBRATING YOUR SMARTGRILL

Before your first grilling session, use your SmartGrill app or voice command to calibrate your SmartGrill by Lynx™. This will set a

minimum flame level which is affected by ambient temperature, altitude, wind conditions and more. Calibration is required for

optimum performance of your SmartGrill. The calibration process will take 15-20 minutes.

To perform a calibration, please close the hood of the grill, then:

• By Voice Command: “SmartGrill, begin calibration.”

• By App:

Go to Resources

Select My SmartGrill

Select Calibrate Grill

Select Automatic Calibration

You will receive a “Calibration failed” if the SmartGrill did not complete the cycle. SmartGrill will automatically shutdown when

calibration is complete.

STEP #6—START USING YOUR GRILL

• Turn your lights on by saying, “SmartGrill Lights”. To turn the lights off, say “SmartGrill, Lights” and the lights will now turn off.

• To try out a recipe, go back to your SmartGrill App and go to the Recipe icon.

• Select a recipe from the recipe list and click Cook Now to send the recipe to your SmartGrill. Follow the voice commands (how many

burners, place food on grill, turn food over, remove food from grill). Please note that it could take several minutes for your SmartGrill

to warm up and give you the command to place food on grill.

Need more help? Please refer to your detailed instruction manual or call our customer support team at 888-289-5969 and choose the
SmartGrill option #5.