HELI INNOVATIONS
REV. 01-Date:06/0525/2017
PIKA 90 FPV RACER - USER MANUAL
Flight controller mount: 29mm x 29mm.
SPECIFICATIONS:
Weight: Frame: 16.5g, total weight with FPV Camera mount: 17.2g
Materials: Plastic.
Size: 90mm.
Maximum propeller: 55 mm.
Motor mount: 8.5x20 mm.
1/5
Fly Direction REF
Pika90-Main Frame Pre-Assembly with FC + Camera
support
HELI INNOVATIONS
PIKA 90 FPV RACER - USER MANUAL
2/5REV. 01-DATE:06/05/2017
4 x Motor Mount
PACKAGE LIST PART
7 x M1x4
7 x Washer
Super mini AIO Camera
5.8G 40CH for FPV Drone
15 D FPV Camera Mount
PTU-Black
2 x O-Ring ID 12 - W 1
Note 1: Pay attention Motor
Wire position to avoid short
circuit or pinching
Motor Mount
PIKA 90 FPV RACER - USER MANUAL
3/5
REV. 01-DATE:06/05/2017
Step 01: Motor Assembly Step 02: Motor Mount Assembly
Note 2: Carefully press fit all 12 Motor Mount pins into
Frame sockets
HELI INNOVATIONS
Motor Wire
Note: Rotate Motor in order Electric Wire will follow
the arrow, as shown
Fly Direction REF
Bottom View
4 x Motor 8.5x20 mm
4 x Washer ∅4x∅1x0.5
4 x M1x4 Head Screw Self Tapping
Camera Mount
3 x Washer ∅4x∅1x0.5
3 x M1x4 Head Screw Self Tapping
Flight Control (Furious FPV Acrowhoop V2 suggest)
(Assembly FC following Fly direction REF)
FRONT
PIKA 90 FPV RACER - USER MANUAL
4/5
REV. 01-DATE:06/05/2017
Step 03: Flight Control Assembly
BACK
After assembly FC with Frame, connect Motor with FC.
Note: Assembly Motor Wire following below picture
Motor Wire
HELI INNOVATIONS
Fly Direction
Eflite 300mAh/500mAh suggest)
Battery (PULSE 300mAh 1S 3.7V 30C/
BACK
Step 05: Propeller Assembly
Step 04: O-Ring Battery Support Assembly
REV. 01-DATE:06/05/2017 5/5
PIKA 90 FPV RACER - USER MANUAL
Note rotation direction of the Propeller
FRONT
BACK
FRONT
2 x CCW propeller
2 x CW propeller
2 x CCW propeller
2 x CW propeller
HELI INNOVATIONS
BOTTOM VIEW
2 x Oring 12x1
Loading...