Lynx MiniModule S VD 3062 Reference Manual
Series 3000
© LYNX Technik AG
Brunnenweg 3
64331 Weiterstadt
Germany
www.lynx-technik.com
Reference Manual
S VD 3062
SDI 6 > 2 Input Switch
MiniModule
s
Version 1.4
Reference Manual S VD 3062 Version1.4
Page 2
Information in this document is subject to change without notice. No
part of this document may be reproduced or transmitted in any form
or by any means, electronic or mechanical for any purpose, without
express written permission of LYNX Technik AG.
LYNX Technik AG may have patents, patent applications,
trademarks, copyrights or other intellectual property rights covering
the subject matter in this document. Except as expressly written by
LYNX Technik AG, the furnishing of this document does not give you
any license to patents, trademarks, copyrights or other intellectual
property of LYNX Technik AG or any of its affiliates.
© LYNX Technik AG 2004 - 2005 all rights reserved
Reference Manual S VD 3062 Version1.4
Page 3
Warranty
LYNX Technik AG warrants that the product will be free from defects
in materials and workmanship for a period of two (2) years from the
date of shipment. If this product proves defective during the
warranty period, LYNX Technik AG at its option will either repair the
defective product without charge for parts and labor, or will provide
a replacement in exchange for the defective product.
In order to obtain service under this warranty, customer must notify
LYNX Technik of the defect before expiration of the warranty period
and make suitable arrangements for the performance of service.
Customer shall be responsible for packaging and shipping the
defective product to the service center designated by LYNX Technik,
with shipping charges prepaid. LYNX Technik shall pay for the return
of the product to the customer if the shipment is within the country
which the LYNX Technik service center is located. Customer shall be
responsible for payment of all shipping charges, duties, taxes and
any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure, or damage
caused by improper use or improper or inadequate maintenance
and care. LYNX Technik shall not be obligated to furnish service
under this warranty a) to repair damage resulting from attempts by
personnel other than LYNX Technik representatives to install, repair or
service the product; b) to repair damage resulting from improper use
or connection to incompatible equipment; c) to repair any damage
or malfunction caused by the use of non LYNX Technik supplies; or d)
to service a product which has been modified or integrated with
other products when the effect of such modification or integration
increases the time or difficulty servicing the product.
THIS WARRANTY IS GIVEN BY LYNX TECHNIK WITH RESPECT TO THIS
PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED.
LYNX TECHNIK AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LYNX
TECHNIK`S RESPONISIBILITY TO REPAIR AND REPLACE DEFECTIVE
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE
CUSTOMER FOR BREACH OF THIS WARRANTY. LYNX TECHNIK AND ITS
VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTAL DAMAGES IRRESPECTIVE OF
WHETHER LYNX TECHNIK OR THE VENDOR HAS ADVANCE NOTICE OF
THE POSSIBILITY OF SUCH DAMAGES.
Reference Manual S VD 3062 Version1.4
Page 4
Regulatory information
Europe
Declaration of Conformity
USA
FCC 47 Part 15
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to the part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense
We LYNX Technik AG
Sandstrasse 7
D-64404 Bickenbach
Germany
Declare under our sole responsibility that the product
TYPE: S VD 3062
To which this declaration relates is in conformity with the following
standards (Environments E1-E3):
EN 55103-1 /1996
EN 55103-2 /1996
EN 60950 /2001
Following the provisions of 89/336/EEC and 73/23/EEC directives.
Winfried Deckelmann
Weiterstadt, November 2004
Place and date of issue Legal Signature
Reference Manual S VD 3062 Version1.4
Page 5
Contents
Warranty....................................................................................3
Regulatory information ............................................................4
Europe......................................................................................................4
Declaration of Conformity ..................................................................4
USA .........................................................................................................4
FCC 47 Part 15....................................................................................4
Contents....................................................................................5
Getting Started .........................................................................7
Packaging.................................................................................................7
Product Description .................................................................................7
Functional Diagram .................................................................................8
Module Layout.........................................................................................8
Connections ...........................................................................10
Video Connections.................................................................................10
Remote Control Panel............................................................................11
Connector...............................................................................................11
for Remote Control Panels.....................................................................11
Power Connections ................................................................................12
DC Power Connector ........................................................................12
Installation...............................................................................13
Mechanical.............................................................................................13
Stand Alone Operation......................................................................13
Multiple Units ...................................................................................14
Electrical Installation. ............................................................................15
Stand Alone Operation......................................................................15
Multiple Units ...................................................................................16
Settings and Control...............................................................16
Switch Settings ......................................................................................17
Switch Function Detail......................................................................17
Factory Preset Condition................................................................... 18
Connector for Remote Control Panels ...................................................19
Parallel Interface ...............................................................................20
Panel Version 1 ................................................................................. 21
Panel Version 2 ................................................................................. 21
Panel Version 3 ................................................................................. 22
Alarm/LED Status Indicators ..................................................25
Channel Condition Indicators ...........................................................25
Front Panel Alarm Indicator..............................................................25
Locate Function.................................................................................26
Reference Manual S VD 3062 Version1.4
Page 6
Auto Store......................................................................................... 26
Specifications (S VD3062)..................................................... 27
Available Options.................................................................. 28
Parts List .................................................................................. 29
Service.................................................................................... 29
Contact Information.............................................................. 30
Reference Manual S VD 3062 Version1.4
Page 7
Getting Started
Packaging
The shipping carton and packaging materials provide
protection for the module during transit. Please retain
the shipping cartons in case subsequent shipping of
the product becomes necessary.
Product Description
The S VD 3062 is a high quality digital video 6 > 2 input
switch designed primarily for broadcast and
professional applications.
The S VD 3062 has 6 inputs for digital video signals,
which can be switched to two independent outputs. A
second input can be selected for emergency
switching. Outputs can be reclocked, or nonreclocked. Auto detection of standard digital video bit
rates in reclocked mode (143Mbit/s, 177Mbit/s,
270Mbit/s, 360Mbit/s) and will transparently pass data
from 10Mbits/s to 620Mbits/s in non-reclocked mode.
A analog reference input allows clean switching for
synchronous inputs.
Inputs can be switched either via the service adapter
and the associated PC GUI SW (LYNX c3_local) or via
an optional remote control panel R CP 3062. Up to six
S VD 3062 can be controlled from one control panel.
The S VD 3062 is part of the 3000 series of MiniModules,
which offer high quality, modularity and flexibility in a
very small form factor ideal for applications where
space is at a premium.
The modules can be used either stand alone using the
optional power supply brick, or as part of a tightly
integrated space saving system where up to 10
MiniModules can be mounted utilizing the optional
LYNX R FR 3005 / 3010 rack housing. This includes
integrated power supply and optional remote control
interfaces.
Reference Manual S VD 3062 Version1.4
Page 8
3
Functional Diagram
Figure 1 below is the basic functional diagram for
the S VD 3062 MiniModule.
Figure 1- S VD 3062 Functional Diagram
Module Layout
Figure 2 shows the physical layout of the S VD 3062
MiniModule. Video I/O is made through standard BNC
video connectors. Module configuration is set via a
small dip-switch located behind a small access hole in
the bottom of the module. A connector for external
control panels is also provided on the module.
If the module is being used in a stand alone
application then the optional power supply (R PS 3001
E, R PS 3001 U or R PS 3001-3) is required to power the
module (not shown)
Reference Manual S VD 3062 Version1.4
Page 9
Figure 2 – Module Layout
Reference Manual S VD 3062 Version1.4
Page 10
Connections
Video Connections
The S VD 3062 MiniModule is configured with standard
75 Ohm BNC connectors. Connection is selfexplanatory. We recommend the use of high quality
video cable for digital video connections to reduce
the risk of interference or errors due to excessive cable
attenuation. Some guidelines for max cable length are
shown below.
250m (820 feet) Belden 8281 (270Mbits/s)
150m (492 feet) Belden 8281 (540Mbits/s)
Note. Due to the compact design of the module it will
be necessary to use a connection tool to secure the
BNC video connectors to the module.
Loading...