Lynx LX-212S User Manual

Lynx Pro Audio S.L.

Valencia, Spain - www.lynxproaudio.com - [e-mail]

USER MANUAL

V.13.10

LX-212S

This user manual is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2013. All rights reserved.

Manufacturer

CB SCHEME, IEC SYSTEM FOR CONFORMITY TESTING AND CERTIFICATION
OF ELECTRICAL EQUIPMENT

CE CERTIFICACTION, EUROPEAN PRODUCT

LX-212S powered cabinet

LYNX Pro Audio S.L.
Calle 7 - Pol. Ind. Picassent
E-46220 Picassent (Valencia)

RoHS Directive 2002/95/EC

CONTENTS

- SAFETY PRECAUTIONS

- CABINET INTRO

SPECIFICATIONS 5
BACK PANEL 6
CONNECTORS AND CONNECTIONS 6

- CONFIGURING THE CABINET DSP OPTIONS

PRESET LIST 8
CARDIOID CONFIGURATIONS 9
CONFIGURATION PANEL 10
SELECT INPUT DIGITAL / ANALOG 10
SELECT AND RUN PRESETS 11
ONLINE CONTROL SYSTEM 12
ETHERNET CONFIGURATION 13

- SOFTWARE, RAINBOW 19

- GUARANTEE 21

Before starting to use this device, please read this instruction manual carefully.
Keep these instructions in the place where the equipment will be used and with easy access to them.

- Electrical appliance.

The exclamation mark within a triangle identifies the presence of electricity. Use the system carefully
without wet hands or feet. Avoid installing the speaker in wet or excesivelly humid places. Regularly
check the condition of the cables and make sure these are not being walked on or pinched. Connect
the speaker to bipolar, earthed mains. The mains plug must be connected to the appropriate protection
(fuse or breaker). Connection to any other type of mains could result in an electrical shock and violate
local electrical codes. DO NOT CONNECT OR DISCONNECT THE AC POWER CONNECTORS UNDER
LOAD.

- Heavy equipment.

Apply back protection when using the system. Avoid loading and unloading at heights.

- Electrical shock risk.

The diagonal mark within a triangle identifies the presence of dangerous voltage.Do not open or handle
the interior of the box. These parts are not to be adjusted by the user. For maintenance and/or repair
please go to an authorized service centre. In order to reduce the risk of electric shock, disconnect from
AC before plug in or unplugging Audio signal cables. Reconnect to AC only if all signal connections are
made and secured. Never manipulate the ground type plug provided. The AC mains plugs should
always remain accessible for operation. Unplug the loudspeaker during storms or when it’s being used
for a long time.

- Hearing damage risk.

These systems can reproduce large quantities of sound pressure which can damage hearing. Take
precautions if you are going to be near them for extended amounts of time and do not get too close.

- Hanging – Flying.

Do not hang the cabinets from the handles or from any other part other than the designated hanging
point. When flying this system please observe the technical and “Rainbow” software data carefully.
Never exceed the maximum safe working loads or ignore the instructions included within this manual.
Use Only flying accessories provided by Lynx Pro Audio S.L. Rigging must be always carried out by
professionals.

- Delicate Material.

Please ensure no foreign object or water enters the speaker. Do not place material that contains liquid
on or near the unit. Only clean the unit with dry cloths. Do not use solvents.

-Overheating – Fire risk.

To reduce the risk of the speaker over heating, avoid direct contact with sunlight. Avoid placing the unit
close to heat inducing objects such as radiators. Do not cover the equipment in use and do not block
any ventilation openings. Do not put naked flame, such as lighted candles, close or on top of the unit.

- Electromagnetic and interferente emissions.

Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile
phones, lap tops, magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)

EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.

-IMPORTANT NOTE.

This Equipment must be used in accordance with these instructions and by trained professional
personnel only.
This equipment should not be used in places with extreme tropical climates. Don’t expose this apparatus
to extreme humidity and or temperature values.

LX-212S

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

INTRODUCTION

To facilitate, correct and reliable use of the Lynx LX-212S we have designed this instruction manual. Please read the
manual carefully before proceeding to install the system.

When flying this system please observe the technical and “Rainbow” software data carefully. Never exceed the
maximum safe working loads or ignore the instructions included within this manual.

5

SPECIFICATIONS:

FREQUENCY RANGE 25Hz -300Hz
FREQUENCY RESPONSE 35Hz- 250Hz ± 3dB

HORIZONTAL COVERAGE 360º single unit
MAX SPL 136 dB/ 139dB peak

TRANSDUCERS LF: 2 x 12" 100 mm Voice Coil 8 Ohm
SHAPE Bass reflex direct radiation
POWER AMPLIFIER 2000W Class D with Switching Power supply

2 x 1000W
DSP Internal LYNX digital processor DSPB-44®
CABINET ADJUSTMENT Back panel LCD screen
INTERNAL CONTROLS Temperature sensor / Fan Speed
SIGNAL CONNECTION NEUTRIK connectors XLR Male Input

XLR Female Loop Thru
CONTROL CONNECTIONS USB (DSP programming),

ETHERNET* (Online Control System OCS®)
AC POWER 195v / 250v selectable. 50/60 Hz 2.9A
AC CONECTIONS 16A NEUTRIK POWERCON with Looping Output
CONSTRUCTION 15 mm Premium birch plywood
FINISH High resistant water-based black paint
FRONT DESIGN Antirush Black metal grille

DIMENSIONS (H x W x D) 522 x 646 x 525 mm
WEIGHT 58 Kg (128 lbs)
RIGGING Integrated flying plates

* Optional

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

LX-212S

CONNECTORS AND CONNECTIONS

XLR AEREAL CONNECTORS

Connect to output

Connect to input

2 Live(+)

3 Live(-)

1 Earth

3 Live(-)

1 Earth
2 Live(+)

OUTPUTS

1.- EARTH

2.- LIVE (+)

3.- LIVE (-)

1

3

2

INPUTS

1.- EARTH

2.- LIVE (+)

3.- LIVE (-)

2

3

1

XLR SOCKET CONNECTORS

6

1.- SIGNAL INPUT.

2.- SIGNAL LINK.

3.- AC INPUT.

4.- AC LINK (máx. +2 cabinets).

5.- USB.

6.- DSP CONTROL.

7.- ETHERNET (optional)

LX-212S BACK PANEL.-

1

2

3

4

5

6

7

LX-212S

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

SOCKET POWERCON CONNECTORS

CAUTION: Do not connect or
disconnect the AC Power
connectors under load.

L - Line
N - Neutral

- Earth

7

CONNECTION EXAMPLE: 4 LX-212S CABINETS

Connect to signal output

Connect to AC output

Connect to AC output