Project5 3/3/05 4:20 PM Page 1
Brands that Perform
1000XP Compact
Electronic Reloading Scale
Instructions
Precision Elite Series
Project5 3/3/05 4:20 PM Page 2
Lyman Precision Elite Series
1000 XP Compact
Electronic Reloading Scale
Instructions
Introduction
Congratulations on your purchase of the Lyman 1000 XP Precision Electronic scale. This is a precision piece of equipment and should be handled with care. Before using the 1000 XP, please read these instructions fully and become familiar with its operation and features. If you do not understand some of the operations or have questions above the use of the scale, call us at 1-800-22-LYMAN (Foreign customers may call 860-632-2020).
Set-Up
1.Select a location for the 1000 XP that is level and stable. It is recommended that the scale be located away from a loading bench equipped with a reloading press. Most benches are not heavy enough to prevent vibrations being transferred to the scale. The scale should also be positioned away from any source of drafts, air currents, or temperature changes. The 1000 XP is sensitive enough to be affected by these conditions.
2.The 1000 XP runs on a 9-volt battery, or an AC power adapter. The battery is installed in the compartment on the underside of the scale. There is an outlet for the optional power adapter on the rear left-hand side of the scale.
3.The scale is equipped with a clear plastic dust cover. The cover can be hinged back or removed if desired. A latch at the front of the scale locks the dust cover down. To remove the dust cover, slide the button at the rear of the scale to the right. Unlatch the dust cover and tilt it back. Tip the cover slightly to the right and out of its left-hand groove first, then and lift the cover from the slot on the right-hand side. To reinstall the cover, reverse the above procedure. It is recommended that the cover be in place when the scale is not in use to protect the platform and load cell.
Loading...