LY International Electronics PB200P Owner's Manual

MIXER AMPLIFIER

PB200P

PB300P

PB600P

PB1000P

O W N E R ’ S M A N U A L

Before operating, please read this manual carefully.

FEATURES

 Three microphone inputs, two auxiliary inputs, and one AUX output for link.

 Transformer for the speaker outputs at 100V, 70V and 4Ω.

 Muting function.

 Individual volume control.

 Low and high tone control.

 A five-element LED level meter is provided for the quick and easy visual monitoring

of sound level.

 The protection and alarm in case of output short-circuit.

FRONT PANEL

Note:

sound is distorted. In such a case, adjust each volume controlling button, until LED
element 4 (+8dB) and LED element 5(+10dB) shall flash.

1

LED power indicator 6 MIC volume control

For main power. Adjust microphone volume.

2 Power switch 7 AUX volume control

For main power. Adjust AUX input volume.

3 AED level meter 8 MIC1 input jack

Indicate output level. Connect to microphone of unbalanced

4 Bass control 30-600Ω with 1/4”phone plug.

Adjust bass response. The muting function is activated

5 Treble control while the signal is sent to MIC1.

Adjust treble response.

When all the five elements of the LED level meter remain lit, it indicates that the

REAR PANEL

1 Mute control 4 AUX output

Adjust muting function. Connect to amplifier.

2 MIC2 input & MIC3 input 5 Output terminals

Connect to the microphones at unbalanced Connect to speakers.

30-600Ω with 1/4 phone plug. 6 AC power connector
The signals from MIC2 and MIC3 will Connect to AC power source.
be muted by the signal from MIC1. 7 AC fuse

3 AUX1 input & AUX2 input Prevent the excessive AC current flow.

Connect to auxiliary source equipment. 8 Fan intake window