LY International Electronics hs838 Operation Instructions Manual

Intelligent Music Player

HS838

Welcome to use our intelligent audio system.

For the better application of this equipment, please read the operation instruction carefully prior to

use.

LY International Electronics Co., Ltd.

Network Music Player

Operation Instructions

CONTENTS

Performance Features………………………………………………………………………….……1

Operations of Startup & Shutdown…………………………………………………………………2

Function Introduction……………………………………………………………………………….2

① Standby Startup………………………………………………………………………….……..2

② System Setting…………………………………………………………………………...……..3

③ Application Program……………………………………………………………………..….…5

④ AUX Auxiliary Audio Source……………………………………………………….………..6

⑤ Bluetooth……………………………………………………………………………….……..7

⑥ Network Music……………………………………………………………………….……….7

⑦ Internet Radio…………………………………………………………………………………8

⑧ Local Music…………………………………………………………………………….……..8

⑨ Setting of City Weather Forecasting………………………………………………………….8

Host Under Control of Mobile Phone……………………………………………………………..9

Appendix, Performance Indicators…………………………………………………………….…..12

Performance Features

 Unique and simple design of appearance adapting to the succinct lines, tasting the

harmonious and contracted life.

 5.0’ TFT high-definition display screen characterized by high definition, good display effect,

and capacitor full-screen touch operation, following the design philosophy with modernized

and fashionable temperament, and adopting the graphical operation interface.

 Options of audio source: Multiple channels of local audio source (Built-in 8G memory +

Internet radio / Network music + Built-in SD bayonet slot + Bluetooth), and one channel of

external audio source.

 Built-in high-performance Hi-Fi digital amplifier, 2.1 low-pitch signal output, and external

active sub-woofer.

 Built-in SigmaDSP audio processor, which is used to achieve the selection of multiple sound

effects and dynamic spectrum display.

 On the basis of “Auditory Weber Law”, the exponential-type volume adjustment technique

adapting to the audition characteristics of human ears uniquely.

 Independent timing function, and the power off memory function.

 RJ45 network interface, connectable to cable network or wireless router, supporting the

wireless control of iOS and Android smart equipment, reading the lists of songs and the

names of songs on a remote basis, controlling the previous song and next song, and adjusting

the volume.

 Supporting various audio formats, including MP3, WMA, MAV, APE, FLAC, ACC, OGG,

and so on.

 Built-in video player, supporting 1080P full high-definition video display, supporting the

playing of the video formats including AVI, RM, RMVB, WMV, MOV, MP4, MPEG, MPG,

FLV and so on.

 Built-in various types of application software, including weather, music, Internet radio, and

network television.

 Supporting with various languages.

 Supporting DLNA/Airplay protocol.



Reading, copying, and deleting the contents memorized in the mobile phone, PSD, and other

mobile devices.

Operations of Startup & Shutdown

Power On/Off

Power On: Push the on/off switch at the right bottom to right direction (fig 1), the electric power

is turned on.

Power Off: Push the on/off switch at the right bottom to left direction (fig 1), the electric power is

turned off.

(Figure 1:Power On/Off)

Attention: Turn off the player by the on/off switch is abnormal shut down. The system files might

missing after several times of abnormal shut down, thus will lead to the failure of the player. Users

should avoid use this off switch if not necessary.

On/Off Button is suggested to use for turning on/off the player:

Player On: Please make sure the power switch is turned on, then long press the on/off button at

the top right of the player (fig 2). The boot screen will appear in 5s and the player is turned on.

Player Off: Long Press the on/ff button at the top right when the player is on, the turn off dialog

will appear. Please choose "Yes" at the dialog, and the player will be turned off in 5s.

(Figure 2Player On/Off)

Function Introduction

1. Standby switch; 2. System setting; 3. Application program; 4. AUX auxiliary sound source; 5.

Turn on

Turn off

on-off key

Bluetooth; 6. Network music; 7. Internet radio; 8. Local music; 9. Setting of city weather

forecasting

1. Standby / Startup

Standby: In the mode of the main interface, touch the icon “ ” for 2 seconds to enter the standby
mode, and the date and time will be displayed on the screen.

Startup: In the mode of standby, slide on the display area to achieve the startup.

2. System Setting

In the main interface, touch the icon system setting” to enter the system setting interface (As

shown in Figure 1).

(Figure 1: System Setting Interface)

(1) Touch the icon “

” to connect WIFI, and turn on the WIFI at the upper right corner to search

the signal automatically (As shown in Figure 2).

(Figure 2: Turning On WIFI Interface)

①

When searching out the WIFI signal, enter the WIFI password for connection (As shown in

Figure 3).