LY International Electronics PM - 210U, 6 PM - 310U, 7 PM - 610U, 8 PM - 1010U Owner's Manual

Page 1
1
6 CHANNEL MIXING AMPLIFIER
PM
-
210U
PM - 310U PM - 610U PM - 1010U
O W N E R ’ S M A N U A L
Before operating, please read this manual carefully.
LY International Electronics Co., Ltd.
http//:www.lyintlcorp.com/
Mix Amplifier
PM-210U
5
2
1
3
0410
9
8
7
6
POWER
+10+10 -10-10
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
BASSBASS0TREBLETREBLE
0
2 4
LINE2 VOLLINE3 VOL
OUTPUT
6 8 10
LINE1 VOL
CH3
CH6
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
MIC1 VOLMIC2 VOL
CHIME
MIC1 IN
CH4
CH1
CH5
CH2
1
OFF
5
3
2
4
OFF
1
4
5
2
3
OFF
1
4
5
2
3
OFF
1
4
5
2
3
OFF
145
2
3
OFF
145
2
3
MP3/SD/TUNER DISPLAY
MP3
MP3/TUNER
Page 2
2
FEATURES
The integral broadcasting power amplifier integrated MP3 player, FM tuner, partitioner
(6 partitions), pre-amplifier and power amplifer.
MP3/TUNER is subject to remote control, and it is possible to control the conversion
between MP3/TUNER, selection of program, adjustment of volume, option repeat mode, and selection of EQ mode and so on by means of infrared remote controland
selection USB/SD.
LED digital tube displaying volume, playing status, program number and so on. 2MIC inputs3AUX inputs, and 1AUX output.
4-16Ω rated output.
6-zone output.
Individual volume control and output level indication for each zone output.
Mute function for priority input.
Treble and Bass control
Chime with priority output
5-unit LED Meter for monitoring volume output in each zone.
Output short circuit protection and caution.
Page 3
3
FRONT PANEL
1 Power Switch 10 Chime Button
2 LED Power Indicator 11 MP3 SD Jack
3 Bass Adjustment Button 12 MP3/tuner select key
4 Treble Adjustment Button 13 MP3/tuner status operation key
5 Line Input Volume Adjustment Button 14 MP3/tuner status operation key
6 MIC Input Volume Adjustment Button 15 MP3/tuner status operation key
7 MIC 1 Priority Input Jack 16 MP3 USB Jack
8 Zone Volume Adjustment Button (1-6) 17 MP3/tuner status display
9 Zone Level Indicator 18 Five-unit LED Level Meter
Note:
When all five units of the LED level meter remain lit, it indicates that the sound is distorted. In
such case, adjusting each volume adjustment button until LED unit 4 (+8dB) and LED unit 5
(+10dB) flash.
Mix Amplifier
PM-210U
5
2
1
3
0410
9
8
7
6
POWER
+10+10 -10-10
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
BASSBASS0TREBLETREBLE
0
2 4
LINE2 VOLLINE3 VOL
OUTPUT
6 8 10
LINE1 VOL
CH3
CH6
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
MIC1 VOLMIC2 VOL
CHIME
MIC1 IN
CH4
CH1
CH5
CH2
1
OFF
5
3
2
4
OFF
1
4
5
2
3
OFF
1
4
5
2
3
OFF
1
4
5
2
3
OFF
145
2
3
OFF
145
2
3
1 2 3 4 5 6 7 8
18 17 16 15 14 13 12 910
MP3/SD/TUNER DISPLAY
MP3
MP3/TUNER
11
Page 4
4
REAR PANEL
1 Mute control Button 8 Speaker Output Terminal
2 MIC 2 Input Jack 9 AC Power Fuse
3 Line Input Jack 1, 2, 3 10 FM antena Jack
4 AUX Output Jack 11 MIC4 Input Jack
(Link with another amplifier or recording equipment) 12 MIC3 Input Jack
5 6-zone Output 13 MIC4 Input Volume Button
6 AC Power Source Insert 14 MIC3 Input Volume Button
7 Fan Exhaust Window
CH4CH1 CH3CH2 CH5 CH6
SPEAKER OUTPUT
ZONE OUTPUT
4-16Ω
~220V/50Hz/6A
F6ALF4ALF2AL F6AL
MIN MAX
INPUT
MUTE
LINE1
MIC2 LINE2 OUTLINE3
MIC3 IN MIC4 IN
MIC4 VOLMIC3 VOL
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
FM ANTENA
FM(75?)
F A
F A
Nur Sicherung 250V Use Only With A 250V Fuse Employer Unlquement Avec Fusible De 250V
6 7
8 911121314 10
PM-1010UPM-310UPM-210U PM-610U
FUSE TYPE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
请勿打开,以免触电
警告
1 2 3 4 5
Page 5
5
CH4CH1 CH3CH2 CH5 CH6
SPEAKER OUTPUT
ZONE OUTPUT
4-16Ω
~220V/50Hz/6A
F6AL
PM-1010U
PM-310U
F4AL
PM-210U
F2AL
F6AL
PM-610U
MIN MAX
INPUT
MUTE
LINE1MIC2 LINE2 OUTLINE3
MIC3 IN MIC4 IN
MIC4 VOLMIC3 VOL
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
FM ANTENA
FM(75?)
FUSE TYPE
F A
F A
Nur Sicherung 250V Use Only With A 250V Fuse Employer Unlquement Avec Fusible De 250V
CH4CH1 CH3CH2 CH5 CH6
SPEAKER OUTPUT
ZONE OUTPUT
4-16Ω
~220V/50Hz/6A
F6AL
PM-1010UPM-310U
F4AL
PM-210U
F2AL F6AL
PM-610U
MIN MAX
INPUT
MUTE
LINE1MIC2 LINE2 OUTLINE3
MIC3 IN MIC4 IN
MIC4 VOLMIC3 VOL
5
2
1
3
0410
9
8
7
6
5
2
1
3
0410
9
8
7
6
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
FM ANTENA
FM(75? )
FUSE TYPE
F A
F A
Nur Sicherung 250V Use Only With A 250V Fuse Employer Unlquement Avec Fusible De 250V
CONNECTION DRAWING
(without multi-zone outputs)
CONNECTION DRAWING
(with multi-zone outputs)
Tuner, CD,
Cassette
Recorder or
another Amp.
To MIC 1 Input
Jack on Front Panel
MIC 1 with Priority
Input
MIC 2
MIC 3 MIC 4
Tuner, CD,
Cassette
Recorder or another Amp.
MIC 1 with Priority
Input
To MIC 1 Input
Jack on Front Panel
MIC 2
MIC 3 MIC 4
Page 6
6
Note:
Individual zone opening and closing may be achieved by adjusting Zone Volume Adjustment
Button on Front Panel.
Instructions to Infrared Remote Controller
1. MP3/TUNER switch button.
2. ModeMP3 and tuner conversion button.
3. Mute: MP3/TUNER mute button. Press this
button once, and the content displayed in LED
will flash after the played program is muted;
and then press this button to cancel the mute.
4. MP3 play/pause operation button, tuner memory
channel call button: press this button repeatedly
to select the memorized channel progressively in
order.
5. MP3 backward song selectioni button, radio
backward channel selection button.
6. MP3 forward song selection button, radio forward
channel selection button.
7. EQ: Under MP3 output mode, with the Class mode, Jazz mode, Rock mode,
Bass mode and Pop mode. This button is also used for calling memorized channel by tuner.
8. VOL-: MP3/TUNER volume decrease button.
9. VOL+: MP3/TUNER volume increase button.
10. 0-9 numerical keys: They are used to input the serial number of MP3 chapter and memorizing number
of tuner channel.
11. U/SD: It is used by tuner to search the memorized channel automatically.
12. RPT: Selection of MP3 repeat mode including repeat one and repeat all.
1 2 4
7 8
10
3
5 6
9
11
12
Page 7
7
Operating Instructions
According to the connecting diagram above, connect the circuit of the system properly, plug in the
power supply in case of no mistake in check, and then turn on the power switch on the front panel. After
such startup, this equipment will play the program which is played upon the previous shutdown in the
default state. For example, the raido program is being played upon the previous shutdown, the radio
program will be played automatically upon this startup. In order to play the MP3 program, please press
“MP3/TUNE” button or the “Mode” button on the infrared remote controller (please refer to the
instructions to the infrared remote controller) for conversion.
1. To play MP3 program
1) Begin to play: Convert to the status of MP3 play by the above means (no such operation if it is
playing MP3 program), insert the U disk storing MP3 programs into the USB interface, and the machine
will play automatically. Use the button 12 and 13 on the panel of machine (refer to the instructions to the
front panel) or the infrared remote controller (refer to the instructions to the infrared remote controller) to
select the chapter to be played, and make use the button 4 to pause the play.
2) Selection of repeat mode: MP3 may use the infrared remote controller to select the repeat mode of
the program with the options of repeat one and repeat all. Press the button “RPT” once, and LED will
display “ONE” indicating the repeated playing of the current played chapter; press button “RPT” again,
and LED will display “ALL” indicating the repeated playing of all the chapters on the U disk.
3) Selection of EQ mode: MP3 in this machine has five (5) EQ modes, including Class mode, Jazz
mode, Rock mode, Bass mode and Pop mode. It is allowed to select by use of the button “EQ” on the
infrared remote controller. When pressing the button “EQ”, the digital tube will display “Eq0” through
“Eq4”. When pressing continuously, five modes such as “Eq0\Eq1\Eq2\Eq3\Eq4” will appear in order,
from which the user can select as required.
4) USB/SD: The MP3 player of this device can play the program from the USB port, and also from
the SD interface, and select the last inserted memorizer to play program in it. For example, if it is playing
the program from the USB port now, and a SD card is inserted into the device, it will play the MP3
program automatically from the SD card.
2. To play radio channel program of tuner
Convert to the “TUNE” play mode by the above means, and then begin to play the radio program.
1Search channel: Before playing, the user shall first search the radio channel. For this machine,
there are two operating methods for searching channel.
a. Search the radio channel with the MP3 song selection buttons on the infrared remote
controller. Press the song selection button once, the radio frequency will increase or decrease by
Page 8
8
0.1MHz. Press the button continuously to enable the frequency to increase or decrease to certain channel.
By such method, the searched channel will not be memorized in the channel memorizing number.
However, the machine itself has the memory function, so the channel played upon the shutdown will be
played automatically upon the next startup. radio
b.By use of the button “ ” on the machine panel or the button “U/SD” on the infrared remote
controller, it is allowed to search from low-frequency stage to high-frequency stage automatically. The
searched channels will be memorized in turn in the memorizing numbers starting from 1 so as to facilitate
the direct calling of the channel.
2) Calling channel: It is allowed to directly call and play the channels searrched and memorized by
automatic search. The buttons “ or ” on the panel are used to select forward and backward
the memorizing number to call the channel for play or the buttons “ or EQ” on the infrared remote
controller or the digital keys from “0-9” to select the memorizing number to call the channel for play.
Prompt:
In the event that this machine is not inserted with U disck prior to startup, the radio program
will be played automatically upon startup. At this moment, the U disk is inserted to convert to the
MP3 play status automatically.
Page 9
9
MUTE FUNCTION
MIC 1 Input Jack and Chime Button have the highest level of priority. Input signals from
them can override other input signals. The grade of this MUTE function can be adjusted.
PRECAUTION OF INSTALLATION
1.
Do not block ventilation holes.
2.
The amplifier should not be placed in any of the areas:
1)
with poor ventilation;
2) exposed to direct sunlight;
3)
with high ambient temperature or adjacent to heat-generating equipment;
4)
with high humidity or heavy dust;
5)
susceptible to vibration.
3.
Make sure the power outlet conforms to the plug of the unit.
4.
Do not use this unit if the electrical power cord is frayed or broken.
5.
Always operate the unit with the ground wire
6.
If a short alarm rings after turning on power and inputting signals, there must be an
output short circuit fault. In such case, power should be cut off immediately. Do not
turn on the power until the fault is removed.
MUTE
MIN MAX
Page 10
10
SPECIFICATIONS
Model PM-210U PM-310U PM-610U PM-1010U
Rated Output 60W 120W 250W 350W
Output Regulation Less than 3dB, from off-load to full load
Input sensitivity
MIC: 3.0mV(±0.5mV)
LINE: 300mV(±50mV)
Frequency Response 80Hz-16kHz (±3dB)
Distortion
Less than 1% (at 1kHz, 1/3 rated output voltage)
Ratio of
Signal to Noise
MIC: more than 71dB
LINE: more than 85dB
Tone
Bass: ±10dBat 100Hz
Treble: ±10dBat 10kHz
Protection DC voltage; overload; short-circuit.
Mute Input signals from MIC 1 override other input signals
Power
Requirements
AC 220-240V/50-60Hz
Power
Consumption
120W 250W 500W 650W
Outer Packing Size(mm) (L×W×H)520×430×195
Unit Size (mm) (L×W×H)418×338×88
Gross Weight 11.7kg 13.5kg 16kg 17kg
Net Weight 9.7kg 11.5kg 14kg 15kg
Specifications are subject to change without notice
LY International Electronics Co., Ltd.
CAUTION
When the Power switcher is off, please pull out the power cord from the socket.
Please keep the equipment out of water.
To reduce the risk of electric shock, do not remove the cover.
Please contact us or authorized dealers for servicing.
Loading...