LXI 56497521750 Owner’s Manual

OWNERS
MANUAL

MODEL NO.

564.9752175O
SERIES

LXI sEmES

COMPACT DISC PLAYER

TABLE OF CONTENTS

Page

Specifications ............. 1

Precautions for usa .......... 2

Features ................. 2

Safety certifications ......... 3

Connections .............. 4

Controls ................. 5

Inserting dbsc .............. 6

Operat_ofl ................ 7

Maintenance .............. 9

TrouhleshootLng ............ 10

P/N L46-381072-3 Sears, Roebuck and Co,, Chicago. IL 60684 U.S.A.

Record the Model Number and Serial Number of
your compact disc pJaver. The Numbers are on

the rear panel,

Model No.
Serial No.

Keep these numbers for future use.

_b;]1bel of cNa[:I_t!is .......

Frequency response ..... 5 20,000 Hz -0,5 dB

Dynamic range ......... 90 dB

Signal-to-noise ratio ..... 90 dB

Harmonic distortion ..... 0,03% let 1 kHz!

Separation ............ 80 dB (at 1 kHzl

Wow and flutter ........ Less than measurable limits

(+-0.001% W, Peak)

Output voltage ......... 1.8V

DISCS

Type ............... Compact Disc

Diameter ............. 120 mm (4-3/4 inches)

* Because its products are subject to continuous improvement, Sears reservesthe right to modify product

designsand specifications without notice and without incurring any obligation.

I CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in_hazardous radiation exposure.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. NO

USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SER-

VICE PERSONNEL.

Sampling frequency ..... 44,1 kHz

Quantization number .... 16 bit linear/channel

Transmission bit rate ..... 4,3218 Mb/sec

GENERAL

Power requirements ..... AC 120 V, 60 Hz

Power consumption ..... 12 W

Dimensions (W x HxD) . . 420x85x270mm

(16-1/2x3-3/8x 10-5/8 inches)

Weight .............. 3.4 kg

(7 Ib 6 oz)

Accessories ........... Connecting pin cord

Explanation of Graphlcel Symbols

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's en-

closure that may be of sufficient magnitude to
constitute a risk of electdc shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the

presence of important operating and mainten-
ance (servicing) instructions in the literature
accompanying the appliance.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

i •

INFORMATION

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accor-
dance with the manufacturer's instructions, may cause interference to radio and television reception.

It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifi-

cations in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such

interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient the receiving antenna

• Relocate the equipment with respect to the receiver

• Move the equipment away from the receiver

• Plug the equipment into a different outlet so that equipment and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.

The user may find th,.' following booklet prepared by the Federal Communications Commission helpful: "How to Identify

[ and Resolve Radio-TV Interference Problems"•

This booklet is available from the US. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.

APPLIANCE TO RAIN OR MOISTURE.

L_..... J

-t-

! PRECAUTIONS FOR USE

!

• I_);s(_wh,ci_car_ _e pla,leu_ ;m_ __I+]COM_PA_CT

playerhave the followingmark on

them : IDIGITAL AUDIO

• During play, if the player is subjected to a sudden

shock or jolt,some noisemay be produced.Thisisnot a

malfunction.

• If the player isoperatedwhile you are receivingan
FM/AM radio broadcast,you may hear noise on the

radiobroadcast.

Inthiscase,turntheplayer'spower switchoff.

• If other audio components or theirconnectingcords

are installednearthisplayer,you may hear a humming
sound.

In thisevent,try changing the locationof the other

components or their wiring.

• Whenever moving the player, be sure to first remove

the disc from it. If the player is moved with a disc
inserted, the disc may be damaged.

• This unit has a wide dynamic range. As a result, if you
turn your amplifier's volume up too high during soft
(low volume) parts of a program, your speakers may
be damaged when the dynamic range of a sudden loud
passage is produced,

_l o)O F!O[ ;_iGV,i :i_ e pldyOl Sudd'¢liy lrorf'i 8 very COl(J

room into a warm room. When a chilled player is

moved suddenly to a warm location, moisture conden-
sation may form on the optical lens, preventing proper
operation. In this case, turn the power on end wait 30

minutes before starting play.

• Do not place foreign objects in the disc tray and
attempt to operate the disc tray control function. It

may cause damage to the mechanism.

• Do not store discs in high-temperature, high-humidity
locations. The discs may develop warps and become

unable to play. Also, discs with moisture on them may
be unplayable. Wipe any moisture off with a soft, dry

cloth, and be sure discs are fully dry before using.

• If the unit is installed in a confined location, heat dissi-
pation will be poor end malfunctions may occur. Also,

do not install the unit on top of amplifiers or other com-
ponents liable to become hot.

• If the unit malfunctions, do not remove it from its
cabinet to attempt a repair yourself. Have it bench
tested by a Sears service center/department.

FEATURES I

Conventional records are all made using analog record-
ing techniques in which the audio signals are recorded as
mechanical vibrations in the shape of the groove on the
record surface, having the possibility of noise caused by

scratches, dust and dirt on the record surface.

In the digital recording system, the audio signal is con-

verted into a binary encoded signal which is not suscepti-

ble to noise interference.

This compact disc player incorporates a semiconductor

laser pickup for playing compact discs with high-density
digitalized sound signals.
It gives superior sound quality and operation when com-
pared to the conventional analog systems.

• Contactless Signal Dctection by Semiconductor Laser

Pickup

• High Performance Sound Reproduction

• S/N Ratio of 90 dB

• Dynamic Range of 90 dB

• Distortion Ratio of 0.03%

• Wow and Flutter of less than Measurable Limits

• Audio Cimuitry Seeksfor Sound Quality.

• Horizontal Front Loading System

• Various Functions

• Random Memory Search System

• Various Search System (Direct, Skip, Manual)

• Repeat Play

• High-Speed Access

• Track and Index Nos, or Elapsed Play Time Display

2-

SAFETV CERT[FICAT!ONS -],,

PROOUCT COMPLIES WITH DHHS RULES 2 i
CFR SUBCHAPTER J, PART 1040 10 AT

OATE OF MANUFACTURE

MANUFACTURED:
MANUFACTURER: SRS

_ MODEt NO ',*i49,'b2t_50 [

I

-3-