LW Measurements LCT 110 User Manual
Professional Weighing
Equipment
LCT SERIES intelligent weighing machine
LARGE COUNTING SCALE
WITH CHECK-WEIGHING FUNCTION
Operating Manual
1
Mark applied
EU Directive
Standards
2004/108/EC
EN 61326-1: 2006
Imperial version
Metric version
LCT3
LCT 1500
LCT7
LCT 3000
LCT16
LCT 7500
LCT33
LCT 15000
LCT66
LCT 30000
LCT110
LCT 50000
Declaration of Conformity
Declaration of conformity for apparatus with CE mark
We hereby declare that the product to which this declaration refers conforms to the following
standards.
Electronic scale: LCT Large Counting Scales
Date: 14. 11. 2012 Signature:
Boon Lim, R & D Manager
LW Measurements LLC, 3510 Industrial Drive, Unit H Santa Rosa, CA 95403
2
Identification
Customer Service
USA
LW Measurements LLC, 3510 Industrial Drive,
Unit H Santa Rosa, CA 95403
USA
Tel: (707) 542-2185
FAX: (707) 542-3285
EUROPE
LW Measurements Europe Ltd
Chalkwell Park House 700 London Road
Westcliff-on-Sea Essex SS0 9HQ
United Kingdom
Tel: 01702-476700
Fax: 01702-477380
ASIA
LW Measurements PTY Ltd
Block 1004, Toa Payoh North
#03-16 Singapore 318995
Tel: (65) 6458 3438
HP: (65) 8119 3401
http://lwmeasurements.com
Refer to our website for information about local customer service centers and details of their
addresses.
3
Introduction
What you should know about these Operating Instructions:
Tree® Professional Weighing Equipment products are simple to operate.
Nevertheless, you should read through these operating instructions in their entirety, so that you can make
optimum use of the full potential and the diverse possibilities of the weighing machine in your daily work.
These operating instructions contain guidance in the form of pictograms and keyboard diagrams, which
should help you in finding the required information:
For the labelling of potential hazards and advice, please see Safety below.
4
Contents
Section
Heading
1
Safety
1.1 Representation and symbols
1.2 Safety recommendations
2
Your weighing machine
2.1 Construction and functions
2.1.1 Construction of the weighing machine
2.1.2 Functions of the weighing machine
2.2 Application, conformity, labelling.
2.2.1 Correct use of the weighing machine
2.2.2 Conformity
2.3 Data and parameters
2.3.1 Technical data
3
Getting started with your weighing machine
3.1 Unpacking the equipment
3.2 Scope of delivery
3.3 Assembling your weighing machine
3.4 Choice of a suitable location
3.5 Checking the mains voltage
3.6 Leveling the weighing machine
3.7 Calibrating the weighing machine
4
Working with the application menu using the intelligent keypad
4.1 Display messages and key functions
4.1.1 Display messages
4.1.2 Key functions
4.2 Program options
4.2.1 Piece counting
4.2.1.1 Number setting
4.2.1.2 Unit weight setting
4.2.2 Advanced piece counting functions
4.2.2.1 Alarm
4.2.2.2 Low sample warning
4.2.2.3 Unit weight enhancement
4.2.2.4 Low piece weight
5
4.2.2.5 High / low check-weighing with counting
4.2.2.6 Setting weight units
4.2.2.7 Activating the acoustic signal
4.2.2.8 Activating the display backlight
4.2.2.9 Automatic stand-by
4.2.2.10 Memory storage
4.2.2.11 Total weight clear
5
Calibration using an external calibration weight
6
Maintenance and service
7
Transport and storage
7.1 Transportation and shipping
7.2 Storage
6
1 Safety
1.1 Representations and symbols
Important instructions, which involve safety, are highlighted with the appropriate mark:
1.2 Safety recommendations
When using the weighing equipment in surroundings with increased safety requirements, the
corresponding regulations must be observed.
The weighing machine may only be used with the power adapter supplied exclusively for use with the
weighing machine.
Before inserting the power adapter, the user must ensure that the operating voltage stated on the power
adapter agrees with the mains voltage.
If not, please contact Customer Service at the address above.
If the power adapter or its cable is damaged, the weighing machine must immediately be disconnected
from the electricity supply (pull out the power adapter).
The weighing machine may only be operated from mains electricity supply with a power adapter which is
in perfect condition.
If there should be any reason to believe that it is no longer possible to operate the weighing machine
without danger, the weighing machine is to be immediately unplugged from the electricity supply (pull out
power adapter) and secured against inadvertent operation.
In carrying out maintenance work, it is essential to follow the recommendations in Chapter 6 Maintenance
and service.
The weighing machine must not be operated in an area subject to explosion risks.
Care must be taken when weighing liquids to ensure that no liquid is spilt into the inside of the weighing
machine or into connections on the rear of the equipment or the power adapter. If liquid is spilt on the
weighing machine, it must immediately be unplugged from the mains electricity supply (pull out power
adapter).
The weighing machine may only be operated again after it has first been re-checked by a service
technician.
These operating instructions must be read by each operator of the equipment and must be available at
the workplace at all times.
7
Loading...