LW Measurements CSS 440 User Manual

Description

Compact Shipping Scale

Instruction Manual

1

2

296*210mm

Function Specification

1. Weighing

Press and hold

return to “0.00”. Place an object onto the platform, once weighing is stable,

LCD display will show the weight and the stable symbol “◎”.

2. KG/LB/LB:OZ conversion

turn on the Scale, press ”[UNIT]” key to switch KG, LB and LB:OZ.

Press and hold “[UNIT]” key for 20seconds, unit symbol on the display will

be flashing for 3times, current unit locked. Press and hold “[UNIT]” key for

20seconds to release.

3. Auto/Non-automatic power-off function

key to turn on the scale, LCD display shown “5095” and

6 PCS count function

6.1 Once the scale is on, press and hold ”[PCS]” key for 2seconds to

access into the sampling setting. LCD display will show the number and “Lo”

repeatedly.

6.2 Press

pieces”, “50 pieces”, “75 peices” and “100 pieces” sampling size.

6.3 Place the numbers of object on the platform which LCD display shown.

6.4 If there is appropriate weight on the platform, scale will stop flashing

after 3seconds

6.5 If the weight on the platform is not appropriate the setting size, LCD

display will the number and “LO” for 10second, then automatically return to

normal weighing mode.

“[UNIT]” key to select “5 pieces”, “10 pieces”, “20 pieces”, “25

Press and hold “[UNIT]” key, and turn on the Scale, the display will show

“An-OF”, then back to “0.00”, Non-automatic power-off function is active

now.

Auto power-off will be restored once the Scale restarted, and auto turning

off time is 2minutes.

4. Low power detection

If the voltage is lower

remind user to change batteries, and Scale will turn off automatically after 2

seconds.

5 HOLD function

Once reading is stable, press “[HOLD/TARE]” key, current reading has

been locked. Removed the object from the platform, Scale will back to “0.00”

after 5seconds.

Turn on the Scale, press and hold “[HOLD/TARE]” key for 2seconds to

access into the Manual hold mode (Hn-Ao). Press and hold “[HOLD/TARE]” key

for 2seconds again to switch to Auto hold mode (H-Ao).

than 3.7v(Temporary), LCD will show “LobAtt” to

3

6.6 Once the scale is on, press “[PCS]” key to access into the previous

setting.

7 Tare function

Place an object on the platform, once reading is stable, press and hold

“[HOLD/TARE]” key for 2seconds, LCD shows “0.00”, Tare function is on.

Place another obje

Tare. The maximum capacity Is the summary of the weights before and

after Tare. If Scale over loaded, display will show “oooooo” and turn off

automatically after 10seconds.

8 Overload indication

One loading is over, LCD shows “oooooo” and turn off automatically after

10seconds.

9 Backlight selection

9.1 Once the scale is on, press and hold “[HOLD/TARE]” and “[UNIT]” key

for 2second to access into the backlight selection.

ct on the platform, display shows only the weight after

4