Luxxor 35 LED User Manual

207 Tremont Street, Rochester, New York 14608

Luxxor®

800.536.0790

Fax: [phone]

User Guide

LUXXOR® 35 LED
LIGHT SOURCE

REV. 0819

Phone: [phone] fax [phone]

gradientlens.com

[e-mail]

gradientlens.com

Luxxor® 35 LED Light Source User Guide

Luxxor®

Luxxor® 35 LED Light Source

Never replace lamps again! The new Luxxor® 35 LED
delivers all the super-bright intensity and whiteness
of the Luxxor 24, but uses long-life LED technology
estimated at 50,000 hrs, of life! (Compared to 500 hrs for
metal halide arc lamps). These new lights also have both
coarse and fine intensity adjustment, allowing finely
controlled dimming with perfect color rendition.

®

Luxxor

35 LED Light Source User Guide

There are no user serviceable or replacement parts. Do not attempt to

WARNING!

dismantle box or remove top cover.

Only qualified personnel should make electrical inspections and repair

CAUTION!

of the LED Light Source.

The high intensity light at the front of the LED Light Source and at the
tip of the fiber-optic bundle will create high temperatures and bright

CAUTION!

light. To minimize the risk of injury, avoid direct viewing or contact.

To prevent temporary blinding and contact with heated parts, always
plug the fiber optic bundle into the LED Light Source before turning the

WARNING!

power on.

Do not use the LED Light Source directly in medical applications.

CAUTION!

WARNINGS & CAUTIONS

Warnings & Cautions

Table of Contents

Warnings & Cautions .........................................3

Setup ......................................................................4

Operation ...............................................................5

Mounting ...............................................................6

Cleaning .................................................................6

Ratings & Specifications ...................................7

Troubleshooting ...................................................8

Approvals/Compliance .......................................8

Customer Service ............................................. 10

All product specifications subject to change without notice.

HOT SURFACE!

CAUTION!

WARNING!

Unit MAY BE HOT. Allow to cool before handling.

Preferred operation is in the horizontal position. Other operating
orientations are permitted.

Any changes or modifications made to this device that are not
expressly approved by manufacturer may void the user’s authority to
operate the equipment.

DO NOT obstruct cooling airflow.
PROVIDE ADEQUATE VENTILATION TO PREVENT OVER HEATING.
Do not cover this light source. Provide a 1.5 inch (3.8 cm) distance
between the LED Light Source and any solid objects. Do not operate
device without the cover in place.

DO NOT IMMERSE or store liquids above or on the LED Light Source.

Please read this entire manual prior to operation.

Protection provided by the equipment may be impaired if not used
in accordance with the manufacturer’s recommendations.

2 3

Phone: [phone] fax [phone] gradientlens.com [e-mail]

Phone: [phone] fax [phone] gradientlens.com [e-mail]