luxvision LCP-2600 User Manual

Please read and know this operating manual inside out, in prior to use of this equipment.

Table of Contents

Introduction 1

Package Contents 1

Classifications .. 2

Designated Symbols 3

Safety Instructions 4

Instrument Components 6

Installation . ,9

Focusing ..10

Operating Instructions ..11

Charts Description ...13

LUXVISION - LCP-2600

Maintenance ....16

Basic Trouble Shooting . … 19

Transportation . . . .19

Technical Specifications ..20

LUXVISION - LCP-2600

Congratulations on your purchase of the LCP-2600 Auto Chart Projector.

Introduction

In the area of subjective refraction, the LCP-2600 is best used for measuring visual

acuity. It is fully recommended that you carefully read, understand and follow the

steps in this manual in order to ensure safe operation, optimum performance and a

longer service life from your new instrument. Please retain this manual for future

reference.

LCP-2600 and accessories were carefully checked and packed prior to the shipment.

However, please check condition and contents upon delivery. In addition to LCP-2600,

this shipment includes:

Package Contents

1 metal Screen (400mm x 350mm)

1 Power Cord

LUXVISION - LCP-2600

1 Dust Cover

1 Remote Control

1 Pair polarized glasses

2 Spare fuses [1A, 250V]

2 AA-sized batteries

Classifications

[ Classification under the provision of 93/42/EEC(MDD)] ClassⅠ

LCP-2600 is classified into ClassⅠ system.

[Protection method against electric shock] ClassⅠ

LCP-2600 is Classified into ClassⅠ instrument.

ClassⅠ instrument in which protection against electric shock does not rely

on basic insulation only, but which includes an additional safety precaution

with the provision of the connection of the instrument to the protective

earth conductor in fixed wiring of the installation in such a way that any

accessible conductive parts cannot become live in the event of a failure

LUXVISION - LCP-2600

of the basic insulation.

[Degree of protection against ingress of liquids] IPX0

LCP-2600 is the ordinary instrument (enclosed instrument without

protection against ingress of liquids). Be careful not to splash water

on the instrument.

[Degree of protection against flammability]

LCP-2600 is classified as an equipment not suitable to be used in a

Potentially flammable anesthetic mixture with air or with oxygen

or nitrous oxide.

Do not use near flammable materials.

[Mode of operation]

Continuous operation

Symbol

Designated Symbols

Description

This symbol indicates a protective earth

LUXVISION - LCP-2600

This symbol indicates that important operating and maintenance

Instructions are included in this User’s Guide.

This symbol on the main switch indicates that the power is OFF.

This symbol on the main switch indicates that the power is ON.

Manufacturer

Date of Manufacturer

This symbol indicates a fuse.

Safety Instructions

LUXVISION - LCP-2600

At Operation

- Never disassemble or touch the inside of the instrument.

This may result in an electric shock or instrument malfunction.

-Never yank the power cord to disconnect from wall outlet but hold the plug while

disconnecting.

This can weaken the metal core of the cord and may result in a short circuit or

an electric shock.

At Storage

- Do not store the instrument in a place where it may get wet or where

poisonous gas or liquid is stored.

- Avoid storing the instrument in an area with excessive heat, humidity, or dust.

Recommended ranges:

Temperature range within -10℃ to +70℃

Relative humidity range within 30% to 85%

Atmospheric pressure range within 500 to 1060hPa

At Installation

- Do not install the instrument near water.

If water gets into the internal structure, there is the possibility of electrical

Shock or instrument malfunction.

LUXVISION - LCP-2600

- Install the instrument in a stable and level place where vibration or

shock does not occur.

The instrument may not perform observation correctly or may malfunction.

Also, if the instrument is tripped over because of any accidental shock,

it may result in possible injury.

After Use

- If the instrument is not be used for a long time, disconnect the power cord from

the wall outlet.

Otherwise, it may cause a tire.

- Remove batteries from the battery case of the remote controller when

the remote controller will not be used for a long time.

At Disposal

- Follow local governing ordinances and recycling plans regarding disposal

or recycling of device components.

Check the specified disposing method for the specific waste in advance,

LUXVISION - LCP-2600