luxvision ET-185 User Manual

Preface

Thank you for purchasing our ET-185 motorized instrument table. Please read this
manual carefully for the sake of your best use.

General Requirements for Safety

Please read carefully about following precautions to avoid unexpected personal injury

as well as the product being damaged and other possible dangers.

Precautions

1. Do not use this instrument in the environment prone to fire and blast or where

there is much dust and with high temperature. Use it in the room and
simultaneously be careful to keep it clean and dry.

2. Check that all the wires are correctly and firmly connected before use. Ensure

that the instrument is well grounded.

3. Please pay attention to all the ratings of the electrical connecting terminal.

4. Only use fuse according to the specifications and ratings stipulated by our

product.

5. Use the power cable supplied with this instrument.

6. Turn off the main power first before changing the fuse.

7. To prevent the instrument from falling down to floor, it should be placed on

the floor where the inclination angle is less than 10°.

8. Turn off the power and cover the instrument with dust cover when it is not in

use.

9. In case there is any trouble, please contact the authorized distributor or our

Repair Department.

THE SAFETY MARKS USED IN THIS INSTRUMENT

TYPE B ATTENTION TERMINAL OF

PLEASE REFER TO THIS PROTECTIVE

MANUAL GROUNDING