WATERPROOF TFT-LCD TV
USER MANUAL
10.4" / 15.4" / 17" / 19"
The front cover picture is based on concept design and not real product photo,
reference only.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE
SECURELY ATTACHED TO THE WALL IN ACCORDANCE
WITH THE INSTALLATION INSTRUCTIONS.
CAUTION: DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
BEWARE OF STATIC SENSITIVE PARTS.
Important Safety Information
Do not attempt to remove the back of this TV; this can expose you to high voltage
and risk of electric shock or fire.
Do not attempt to modify this product in any way as this will invalidate your
warranty and expose the risk of electric shock or fire.
Only use the supplied AC DC transformer and ensure that the main power cord is
plugged into a non damaged socket and away from any heat source. The power
suppl y is not waterproof and must be positioned in a dry, well ventilated area away
from water and moisture*.
Do not connect the TV direct to the mains socket without the converter*.
Position your TV so that no bright light, sunshine or direct heat can affect the TV.
If there are any unusual smells or sounds coming from the unit, disconnect the power
and contact an authorised dealer or repair centre*.
The unit must be earthed to the main earth system of the building and must
conform to the latest electrical safety regulations*.
When cleaning your TV do not apply any abrasive cleaners, wax, benzene,
alcohol or clearing detergents. Chemical cleaners may fade, dissolve or crack the
TV surface. We recommend a soft damp cloth and non abrasive cleaner.
* Please note that the installation of your TV should be carried out by a technically
competent person and must conform to all the relevant regulations. If in doubt please
contact your supplying dealer or a qualified electrician.
CONTENTS
I. Contents of package..............................................1
II. LCD instructions...................................................... 1
1. Front panel button indication ...............................1
2. Connectors indication ...........................................1
III. Remote control instructions ................................. 2
IV. Connection..............................................................3
1.Connect the TV..........................................................3
2.Connect to AV/S-Video ...........................................3
3. Connect to the PC................................................... 3
V. On Screen Display (OSD) MENU............................ 4
1. ATV ...........................................................................4
2. DTV ........................................................................18
VI. Trouble Shooting................................................. 22
VII. Specification........................................................ 23
VIII. Installation Instructions..................................... 33
Thank you for choosing LUXURITE waterproof LCD TV. Before using
this product please read the instruction manual carefully which will
ensure correct installation and ease of use. Please keep this manual
for future reference. The information in this manual is subject to
change without Prenotice.
1 234
5 678 9
User Manual
I. CONTENTS OF PACKAGE
LCD TV
Remote control
Power adapter
User's manual
II. LCD INSTRUCTIONS
2. Connectors indication:
III. REMOTE CONTROL INSTRUCTIONS
1. Front panel button indication (Optional)
This section is only applicable to models with touch buttons on the front panel.
2
Please check the following items are included in the package after opening, contact the
distributer immediately if any of the items showing below are missing.
1 2
3
4
5 6
7
8
POWER HDMI VGA S-VIDEO CVBS R L PC ATV/DTV
AUDIO-IN
9
1
1 2
3
4
5 6
7
8
(1) MENU: Press it to enter into OSD.
(2)(3)"VOL-"VOL+": Adjust the Volume/OSD Menu.
(4)(5)"CH-""CH+": Adjust the Channel/OSD Menu.
(6) TV/AV/PC: Swich between TV/AV/PC mode.
(7) Power Key: Power switch.
(8) Remote receiving window.
1. EPG Electronic Program Guide
2. FAV Favorite channels group
3. REVEAL Display program information
4. LCD MENU Pop screen display menu
5. EXIT Exit current menu to father level
menu
6. ENTER Confirmation key
7. DIS PLAY display current program information
8. AUTO In VGA mode auto adjust the
picture to the middle of screen
9. ASPECT Adjust aspect ratio 4 3 14 9
16 9 Subtitle Fullscreen Zoom1
Zoom2
10. NICAM Near Instantaneous Companded
Audio Multiplex
11. INPUT Switching TV / SCART/ CVBS /
S-VIDEO / VGA / HDMI / DTV
12. PMODE Picture mode
13. SMODE Sound mode
14. SLEEP Sleep Timer
STANDBY
DISPLAY
AUTO
MUTE
ASPECT
VOL
ENTER
LCD MENU
INPUT
PMODE
SMODE
SLEEP
FAV
FAV-
FAV+
EPG
TEXT
HOLD
LANG
SUBTITLE
INDEX
SIZE
REVEAL
SUBPAGE
EXIT
CH
NICAM
1
2
3 4
5
6
7 8
9
0
1
2
3
4 5
6
7
8
9
10
11
12
13
14
User Manual
(1) DC 12V inlet: Dc 12V input.
(2) HDMI: High-Definition Multimedia Interface.
(3) PC signal inlet: VGA jack.
(4) S-VIDEO connector: Input S - Vedio signal.
for HDTV program.
(5) AV IN inlet(Yellow): Input vido signal.
(6) AUDIO IN-R inlct(Red): Input stereo audio
signal to the right speaker.
(7) AUDIO IN-L inlct(White): Input stereo audio
signal to the Left speaker.
(8) PC AUDIO IN: PC AUDIO INPUT CONNECTOR
(9) ANT inlet: Antenna inlet.
Delete Analog Program
Press / button and then use / to select whether to delete all the analog programs.
Language
Press / button and then use / to select the OSD language.
3
4
V. On Screen Display (OSD) MENU
ATV
In this manual, the OSD ( On Screen Display) may be different from
your TV s, because this is just an example for the TV operation.
Aim the remote control at the infrared receiver window on the television When using.
Avoid excessive pressure, dropping and disassembling of the remote control
Avoid pressing keys continuously and quickly, Interval between sequential operations
should be at least 2 seconds.
NOTE
1. Connect the TV
Make sure that LCD TV is power off
Insert the CATV cable into antenna socket
Turn on the TV
Select TV mode
Control the volume by VOL- / VOL+
Using CH+/CH- to choose the channel
LCD TV can be turned off by power button on remote control
IV. CONNECTION
2. Connect to AV/S-VIDEO device
Make sure that both of AV/S-Video device and monitor are power off
Connect AV device and LCD TV with AV cable or S-VIDEO cable
Connect audio cable into the audio input jack on LCD TV
Turn on the LCD TV , then turn on the AV/S-VIDEO device
Select AV or S-VEDIO mode
Control the volume by VOL- / VOL+
LCD TV can be turned off by power button on remote control
3. Connect to the PC
Make sure that both of PC and LCD TV are power off
Connect PC and LCD TV with the D type VGA cable. Fasten the screws.
Insert the AC adaptor port into power input jack, connect another port to the power
supply (Range from 110V to 240V).
Connect the audio cable
Turn the LCD TV on , and then turn on the PC
Set the input source to PC mode
Control the volume by
LCD TV can be turned off by the power button on remote control
First Time Installation
First Time Installation
Country
Language
Delete Analog Program
Analog Program Search
Delete Digital Program
Digital Program Search
UK
English
OK
Cancel
Select Adjust
If this is the first time you open the TV and there is no programs in the TV memory, the
First Time Installation menu will appear in the picture.
Country
Press / button and then use / to select the country.
User Manual User Manual
25
Auto
No Signal
Auto
TV Label
5 6
First Time Installation
YES
First time installation is not finished!
Are you sure to exit?
Do It next time
NO
TV Information
1
2
3
5
6
4
If the icon of NICAM mode is red, it means the current program supplies multi
NICAM signals, and you can select it by pressing NICAM button.
Mono Stereo Dual Dual
The NICAM modes and relative icons:
VIDEO menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
PICTURE
PictureMode
Contrast
Sharpness
Tint
Colour
Brightness
Standard
50
50
50
0
Normal
Select Adjust
Press / button to select PICTURE in the main menu.
Press / button to select the option that you want to adjust in the PICTURE menu.
Press / button to adjust.
After setting the items, select OK to finish the first time installation, or select Cancel to
exit this menu.
Delete Digital Program
Press / button and then use / to select whether to delete all the digital programs.
Digital Program Search
Press / button and then use / to select whether to start searching digital programs.
Analog Program Search
Press / button and then use / to select whether to start searching analog programs.
If you cancelled the first time installation, it will remind you whether to set the first time
installation next time.
Program Information
Press DISPLAY or NICAM button to display the program information.
1. The number of current program.
2. The colour system of current program, could be selected in Manual Tuning menu
(an option of SETUP menu).
3. The name of current program.
4. The label of current program, you can label it in Manual Tuning menu (an option of
SETUP menu).
5. The sound system of current program, could be selected in Manual Tuning menu
(an option of SETUP menu).
6. The NICAM mode of current program.
User Manual User Manual
SOUND
Volume
SoundMode
Balance
Treble
Bass
Personal
28
0
0
0
Select Adjust
Colour temperature
Select an optimum colour temperature mode to suit your eyes for viewing among Normal,
Warm and Cold.
NOTE: This option is available only in PC mode.
DNR (Digital Noise Reduction)
If the broadcast signal received is weak, you can select the DNR option to reduce the
video noise level between Off, Low,Mid and High.
PICTURE
Colour
Sharpness
Tint
Colourtemperature
DNR
50
0
Normal
Off
Normal
Select Adjust
7 8
Contrast
Press / button and then use / to adjust the contrast of the picture.
Contrast 28
After adjust the value you want, press LCD-MENU button to return to the preview
MENU.
Brightness
Press / button and then use / to adjust the brightness of the picture.
Sharpness
Press / To select the sharpness mode of your TV. (Available Sharpness Mode: Normal,
Sharp, Sharpest, Softest, Soft.)
Colour
Press / button and then use / to adjust the colour saturation.
NOTE: This option is invalid in PC mode, and it will be shown in gray.
Tint
Press / button and then use / to adjust the tone of colour when your system is in
NTSC.
AUDIO menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
Picture Mode
Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Personal,
Movie, Sport, Mild, Game.)
If you change the value of Contrast, Brightness, Colour, Tint, Sharpness or Colour
temperature on the picture menu, the picture mode will be changed to "Personal"
automatically. You may select the picture mode directly by pressing PMODE button.
TIPS: You can press PMODE button on the remote control, to select the Picture Mode
directly.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
User Manual User Manual
SETUP
Country
Autotuning
Manualtuning
Program Edit
UK
Select Adjust
9 10
After adjust the value you want, press LCD-MENU button to return to the preview
MENU.
Sound Mode
Select Sound Mode in SOUND menu. (Available sound mode: Peraonal, Voice, Music,
Theatre.)
If you change the value of Bass and Treble on the Sound menu, the sound mode will be
changed to "Personal" automatically.
You may select the sound mode directly by pressing SMODE button.
TIPS: You can press SMODE button on the remote control to select the Sound Mode
directly.
Bass
Press / button and then use / to increase or decrease the level of the lower-pitched
sounds.
Balance
Press / button and then use / to adjust the audio output between left and right
speakers.
Treble
Press / button and then use / to increase or decrease the level of the higher-pitched
sounds.
Setup menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
NOTE: SETUP menus are different for different input sources, if the input source is
selected HDMI / YPbPr / VGA and there are no relative input signal, SETUP
menu will be unavailable.
SETUP menu of TV input:
Press the / button to select SETUP in the main menu.
Press the / button to select your option what you want to adjust in the SETUP menu.
Press the / button to adjust.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
Country
This option allows you to select the country.
Note: Before you perform Auto Tuning, you must choose the country where you are by
selecting COUNTRY option.
Auto tuning
This option allows you to tune the channels that can be received automatically.
Volume 28
Volume
Press / button and then use / to adjust the sound level.
Press the / button to select SOUND in the main menu.
Press the / button to select the option that you want to adjust in the SOUND menu.
Press the / button to adjust.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
User Manual User Manual
Manualtuning
Program
SoundSystem
ColourSystem
ManualSearch
Program Lable
AFT
23
DK
Auto
Off
471.43 MHz
Select Adjust
11 12
Auto Tuning
Searching
6
Exit
MENU
ATV
215.00MHz
You can press LCD-MENU button to stop auto tuning and close the OSD menu.
Manual Tuning
This option allows you to perform Manual Tuning.
Note: Before you perform Manual Tuning, you must choose the country where you are
by selecting Country option.
Press / to select Manual tuning in SETUP menu.
Press / to perform your selection, the menu of Manual tuning will display on the
screen.
Program Label
This option allows you to label a channel, you can also relabel the programs have been
labeled.
Select a channel you want to labeled.
Press / select Program Label in SETUP menu.
Press / to perform your selection. The menu of program label will display as below:
Program
The current program number. Press / to select the upper or lower program.
Sound System
Press / to select a corresponding sound system, such as DK, L/L , BG.
Colour System
Press / to select a corresponding colour system, such as Auto, PAL, SECAM.
AFT (Auto Fine Tune)
Due to weak signals or a wrong antenna configuration, some of the channels may not
be tuned to the best reception condition. AFT function allows you to fine tune channel
selected(the frequency of channel is around the value in Manual Search option.
Press the numeric buttons to input the numbers directly or press / to select the
letters.
Press / to move the cursor.
Press ENTER, LCD-MENU or EXIT button to confirm and return to previous menu.
Program Label
This option has two functions:
Set the frequency of channel for AFT option.
Press button for 3+ seconds and it will start auto tuning from this frequency.
Manual Search
Manual Search
- - - . - -
MH
z
Press ENTER key to start.
Auto Tuning
Press ENTER key to start.
Enter Return
ENTER
MENU
User Manual User Manual
PC Position
Auto Sync
Phase
Clock
H Position
V Position
Position Reset
Begin
51
Select Adjust
50
50
50
13 14
Press / to select Program Edit in SETUP menu.
Press / to enter into the sub menu, a channel list will display.
Press / to select the channel in the list which you would like to sort.
Press to perform your selection.
Press / to select the location you would like to place the channel.
Press to perform you selection.
Press LCD-MENU to return to the previous menu or press EXIT to exit.
Program Edit
This function allows you to sort
the TV programs according to
your preferences, as following:
Channel ListChannel List
Flags ATV
Favorite Move
Skip
Lock
1.
2.
3.
4.
5.
6.
7.
8.
x
x
x
x
x
x
x
SETUP menu of VGA input
(for setting the PC picture
position):
SETUP menu of HDMI input (for setting the HDMI picture position):
HDMI Position
H Position
V Position
Position Reset
Select Adjust
50
50
SETUP menu of YPbPr input (for setting the YPbPr picture position):
YPbPr Position
H Position
V Position
Position Reset
Select Adjust
50
50
Timer menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
Press the / button to select TIMER in the main menu.
Press the / button to select your option what you want to adjust in the TIMER menu.
User Manual User Manual
15 16
Press the / button to adjust.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
TIMER
SleepTimer
OSDTimer
0 Min.
30Sec
Select Adjust
Sleep Timer
Select the sleep time to put automatically the TV in standby mode. Timer can be
selected as 0min, 15min, 30min,45min,60min,75min,90min,105min,120min. Also you
can select the sleep time by pressing SLEEP button repeatedly.
OSD Timer
You can select the time when the OSD display on the screen such as: 5Sec,10Sec,15Sec,
20Sec,25Sec,30Sec.
Function menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
FUNCTION
Bluescreen
On
Video Size
Auto
First Time Installation
Reset
Language
English
Select Adjust
Child Lock
Press the / button to select FUNCTION in the main menu.
Press the / button to select your option what you want to adjust in the FUNCTION
menu.
Press the / button to adjust.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
Video Size
This option allows you to select the screen display mode which best corresponds to your
viewing requirements.
Note: The available aspect mode may be different in different input signal.
Blue screen
This option allows you to select the blue background on or off. If on, the screen
background will turn blue at very weak or no signal condition.
Child Lock
Press ENTER or button to set the child lock.
Language
Press / to select the OSD language.
You need to enter the PIN code if the Child lock is set on , and the default PIN code
is empty, you can press ENTER button directly to enter.
PIN Code:
Delete
Input
0~9
Enter
ENTER
TIPS: The superuser's (administrator's) password is 4711.
User Manual User Manual
Channel ListChannel List
Select Enter
ENTER
DTV
DTV
FUNCTION
Change PIN Code
Key Lock
On
Child Lock
On
Select Adjust
Child Lock
Press ENTER or button to
set the child lock.
Key Lock
Press ENTER or button to
set the key lock.
Change PIN Code
Press button to enter
Change PIN Code menu.
Change PIN Code
Enter Again
New PIN Code
Old PIN Code
Select
Adjust
Input
0~9
Confirm
ENTER
First Time Installation
Press button to open the first time installation menu, and the operation of this menu
is in page 3.
Reset
Press ENTER or button to reset the TV to the factory default.
Old PIN Code
Press 0~9 buttons to enter the correct old PIN code, you can not change the PIN code if
you entered a wrong PIN code.
New PIN Code
Press 0~9 buttons to enter the new PIN code you want.
Change PIN Code
Press 0~9 buttons to enter the PIN code you entered in the New PIN Code menu again
to confirm the new PIN code.
DVB Operation
Channel List options
Press ENTER button to open the Channel List, then Press / to select the channel you
want to watch.
Program List
17 18
User Manual User Manual
Favorite List options
Press FAV button to open the Favorite List, then Press / to select the channel you
want to watch.
NOTE: Only the channels that you selected to FAV in Program Edit Menu could be
displayed in Favorite List.
Favorite ListFavorite List
Select Enter
ENTER
Channel Search options
SETUP
Country
Autotuning
Manualtuning
Program Edit
UK
Select Enter
Press the / button to select SETUP in the main menu.
Press the / button to select your option what you want to adjust in the SETUP
menu.
Press the / button to adjust.
When you are satisfied with your adjustment, press the LCD-MENU button to return
to the previous menu or press the EXIT button to exit the main menu.
Manualtuning
Channel
Start Search
Service Found
Frequency
Signal Quality
Signal Strength
21
Begin
0%
474.00 MHz
0%
1
Select
Adjust
Input
0~9
Press / button to select Manual Search, Press ENTER or button to set the Manual
Tuning.
Channel
The current channel number. Press / to select the upper or lower channel, Press 0~9 to
select the channel directly.
Start Search
To select whether to start searching in begin/searching/finished.
Service Found
The services be found.
19 20
User Manual User Manual
Channel ListChannel List
Flags DTV
Favorite Delete Lock
Signal Quality
The signal quality of current
channel.
Signal Strength
The signal strength of current
channel.
Frequency
The frequency of current channel.
Program Edit
This function allows you to edit
the DTV programs according to
your preferences, as following:
EPG Menu
- Use EPG button on the remote control to display the EPG menu directly as below:
Channels
GD TV Best Scapes
Electronic Programme Guide
Sun 13/1 22:10
Current Event Next Event
GD TV Best Scapes 22:00-00.00
Navigate
Schedule Watch More
OK
INFO
2. GD-3
3. GD-5
4. GD Life
5. GD Finance
Fit & Fearless
The Jewellery Chan...
Programmes start at...
The Ten Minute Free...
GD TV Best Scapes
The Jewellery Chan...
Programmes start at...
The Ten Minute Free...
VI. TROUBLE SHOOTING
If you are concerned about the performance of your TV please check the following chart
for possible solutions. If the problem still exists please contact your supplying dealer who
may be able to offer additional advice.
PROBLEM CHECK ITEM
No picture on screen and
no sound from speakers.
Insert the AC power cord plug securely in AC
power outlet . Make sure the remote control is
not on standby.
No picture / No picture
from AV terminal.
Check the brightness settin g of the display.
Make sure a cable with no VIDEO input signal
is connected to the S-VIDEO INPUT terminal.
Check the input source is set to AV mode.
Picture is displayed,
but no sound from the
speakers.
Check the sound setting. Make sure the sound
is not muted. Make sure the speakers are
connected properly. Make sure the connectors
of the optional speaker system are securely
inserted.
21 22
Remote control does
not work.
Change the batteries. Make sure the infrared
transmitter window is not receiving strong light
such as light from fluorescent lamps.
The picture is not sharp.
The picture moves.
The reception may be weak. The state of the
broadcast may also be bad. Make sure the
antenna is facing the right direction. Make sure
the outside antenna is not disconnected.
The picture is doubled
or tripled.
(TV mode only)
Picture is too dark.
Make sure BRIGHTNESS setting is not set too low.
Check to see BRIGHTNESS setting.
Make sure the antenna is facing the right
direction. There may be reflected electric waves
from mountains or buildings.
User Manual User Manual
VII. SPECIFICATION
PROBLEM CHECK ITEM
There are stripes on the
screen or colour fade.
The picture is spotted.
(TV mode only)
Is the unit receiving interference from other
devices? Transmission antennas of radio
broadcasting stations and transmission
antennas of amateur radios and cellular
phones may also cause interference Use the
unit as far apart as possible from devices that
may emit high frequency electromagnetic
waves.
Show NO SIGNAL
VGA cable is connected well.
Check power of PC is turned on.
Stripe picture in Close
Window (PC mode only)
Use the Auto Adjust function or adjust the
Phase and Clock.
23 24
250cd/2 m , 300cd/ ,300cd/ ,400cd/
2
m
2
m
2
m
View angle
LCD SIZE
Brightness
Life
10.4 /15.4 /17 /19
50,000 hours
90/110, 90/110/, 100/130, 160/160.
(Up down/left right)
User Manual User Manual
Due to technology changes or improvements, changes may be made without pre notice,
please confirm specifications with your distributors or retailers before purchase.
10.4 : 800x600@60Hz
15.4 : 1280x800@60Hz
17.0 : 1680x1050@60Hz
19.0 : 1440x900@60Hz
Power
consumption
Accessories
Resolution
System
Input
Amplify
OSD Languages
Power suppy
Video system
Audio system
PAL, SECAM, DVB-T
BG, DK, I, L/L
DTV
(DVB-T)
Modulation
Video System
Audio System
Basic Functions
COFDM 2K/8K QPSK,16QAM,64QAM
MPEG- MP@ML
MPEG-1/2 layer 1,2,3
EPG,Subtitle,Teletext(EURO),MHEG-5(UK)
ATV
AV,S-video
PC
Audio
HDMI
75 ANT.
AV Cable input, S-video input
DB 15 VGA Input
Audio 1 (R/L speaker input)
Audio 2 (R/L speaker input)
480i, 480p, 576i, 576p, 720p,1080i, 1080p
2Wx2
English, French, German, Italian, Spanish, Portuguese.
DC12V
42W
Remote controller, Cell, AC adapter, AC wire.
ITEM
SPEC
ITEM
SPEC
Picture is not in the centre
(PC mode only)
Use the Auto Adjust function or adjust
H-Position V-Position
FRONT VIEW OF HOLE SIDE VIEW
25 26
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
TV BACK VIEW
User Manual User Manual
INSTALLATION INSTRUCTION
1. Make a hole of size 320X230X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
STANG FOR THE PLUG STAND FOR THE WALL
INSTALLATION INSTRUCTION
1. Make a hole of size 320X231X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
STANG FOR THE PLUG STAND FOR THE WALL
27 28
User Manual User Manual
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
INSTALLATION INSTRUCTION
1. Make a hole of size 442X280X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
INSTALLATION INSTRUCTION
1. Make a hole of size 442X280X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
STANG FOR THE PLUG STAND FOR THE WALL STANG FOR THE PLUG STAND FOR THE WALL
29 30
User Manual User Manual
INSTALLATION INSTRUCTION
1. Make a hole of size 495X310X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
INSTALLATION INSTRUCTION
1. Make a hole of size 495X310X37MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
STANG FOR THE PLUG STAND FOR THE WALL STANG FOR THE PLUG STAND FOR THE WALL
31 32
User Manual User Manual
INSTALLATION INSTRUCTION
1. Make a hole of size 513X326X45MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
INSTALLATION INSTRUCTION
1. Make a hole of size 513X326X45MM(width/highness/depth)in the wall for TV installation
2. Locate the screws as shown in the illustration(Front view of the hole)
3. Put the TV into the hole, raise it a slight distance to make the hanging holes in the back
of TV point at the screws in the wall
4. Hang the TV on the screws
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
TV BACK VIEW
FRONT VIEW OF HOLE SIDE VIEW
STANG FOR THE PLUG STAND FOR THE WALL STANG FOR THE PLUG STAND FOR THE WALL
VIII. INSTALLATION INSTRUCTIONS
It is the installers responsibility to ensure that your Waterproof LCD TV is installed and
sealed correctly. Your warranty will be void if problems occur due to faulty installation
or poor sealing.
Decide on the appropriate position to mount your TV and check for any cables, pipes
or other hazards where the unit will be mounted.
Carefully measure the position of the area of material to be removed in order to flush
mount the TV using the dimensions suitable for your TV either 10.4 ,15.4 ,17 or
19 models as detailed on the appropriate diagram.
When mounting in stud walls please check for any supporting framework behind the
plasterboard or other finishing materials.
Mounting depth required for all models is 37mm.
Chase all cables into the wall at the bottom of the TV to reduce chances of water
reaching the TV.
When all the material is removed within the dimensions detailed to suit your size TV use
an appropriate fixing device with the screws provided leaving a screw thread of 4mm
to allow fixing to the TV brackets. In some cases alternative fixings/screws will be
required available from hardware stores.
Connect and check that all functions of the TV work before final fitting.
Prior to final fitting ensure that the unit has sufficient silicone around the inner edge of
the TV frame.
Finish the outer edge of the screen by tiling or edging profile with suitable grout or
silicone.
37 mm (DEPTH OF HOLE)
STAND FOR THE WALL
STAND FOR THE PLUG
SILICONE
33
WARRANTY
CARD
REPAIR INFORMATION
DATE
CONDITION
REPAIRMAN
COMMODITY:
PRODUCT MODEL:
INSPECTOR:
CONTACT TEL:
CUSTOMER NAME:
SERIES NO:
PURCHASING DATE:
INVOICE NO:
PRODUCTION DATE:
SELLER:
THROUGH THE TEST OF QUALITY CONTROL DEPARTMENT IN OUR COMPANY, THE PRODUCT
HAS BEEN PROVED THAT THE FUNCTION PARA-METER HAS REACHED THE TECHNIQUE
CRITERIA. THEY ARE PERMITTED TO LEAVE FACTORY.
User Manual
Loading...