Luxor|H.Wilson PS4000 User Manual
PS4000 Assembly Guide
Part List:
1 x Left Panel
A.
1 x Right Panel
B.
1 x Bottom Panel
C.
1 x Middle Panel
D.
1 x Top Panel
E.
1 x Shelf Panel
F.
1 x Left Shelf Bracket
G.
1 x Right Shelf Bracket
H.
1 x Back Panel
I.
2 x Locking Casters
J.
2 x Casters
K.
16 x Small Screw (M5x15)
L.
8 x Large Screw (M5x48)
M.
1 x Caster Wrench (14mm)
N.
1 x Allan Wrench (4mm)
O.
BA
CDEF
GHI J
K
LMNO
www.luxorfurn.com
Step 1
Install the casters (J,K) to the side panels (A,B).
Using the supplied allan wrench (O), install
the bottom panel (C) with the 4 long screws (M).
Note: Do not completely tighten the screws.
Conrm that the arrowhead
mark on the insert aligns
with the centerline of the
drilled hole.
Centerline of edge
drilled hole
C
K
M
J
Step 2
Using the allan wrench (O), install the top panel (E)
to the main unit with 4 small screws (L).
Note: Do not completely tighten the screws.
B
A
E
L
Step 3
Using the allan wrench (O), install the back panel (I)
to the main unit with 8 small screws (L).
Note: Do not completely tighten the screws.
If you have a cabinet pack, open it now. If not
continue following the instructions.
L
I
Step 4
Using the allan wrench (O), install the middle
panel (E) to the main unit with 4 large screws (M).
Note: Do not completely tighten the screws.
Conrm that the arrowhead
mark on the insert aligns
with the centerline of the
drilled hole.
Centerline of edge
drilled hole
M
D
Loading...