Luxor|H.Wilson AVJ42XLKB User Manual

01/31/13

www.luxorfurn.com
www.hwilson.com

Pullout Shelf
Instructions

AVJ42KB, W42AKB

(Front)

C
B

F

Parts List

H x1

Tools Required

G x2

- Phillips Screwdriver

- Pliers or Adjustable Wrench

A x4

F x4

B x4

D x4 E x4

C x4

(Front) (Back)

G

D

A

(Back)

(Back) (Front)

1 2 3

Take the top shelf of your metal cart

and lay it at. Collect parts: F, A, B &
C. Push Screw A through the hole at

the top of the shelf. Lay bracket F and
washer B on top of screw A. Take nut C
and fasten with a screwdriver and pliers.

Collect parts: G & D. Align the pullout

shelf runner G so that the threaded

screw holes match up with the holes on
bracket F. Make sure the runner slides
toward the front of the cart. Take screw
D and fasten through bracket F into the
threaded screw holes of runner G.

H

E

Collect parts: H & E. Slide out runner G
so that it is fully extended. Align pullout
shelf H and runner G so that the screw
holes meet. Take screw E and fasten it

through runner G into the screw holes
of pullout shelf H. The pullout shelf

assembly is now complete.

01/31/13

www.luxorfurn.com
www.hwilson.com

Adjustable Height
Metal Cart Instructions

AVJ42, W42A

C

Parts List

Non-slip mat

A x1 B x1 C x4

A

Cabinet comes
pre-assembled

on units that

include a cabinet.

Tools Required

- Phillips Screwdriver

- Rubber Mallet

- Pliers or Adjustable Wrench

D x4 E x4

A

E

D

B B B

1 2 3

Position the bottom shelf B so that the
caster holes are facing up. Insert caster C
into the caster holes on the bottom of shelf
B. Use a mallet to set the casters properly.

Flip bottom shelf B so that it is on its side.
Set top shelf A so that it overlaps bottom

shelf B. Align the screw holes so that the
top shelf A is at the desired height.

E

Insert screw D through the aligned screw hole

of A and B and fasten nut E with pliers and
screwdriver. Place Non-slip mat on desired
shelf. The cart is now complete.

D