Luxor|H.Wilson AVJ42 User Manual

01/31/13

www.luxorfurn.com
www.hwilson.com

Adjustable Height
Metal Cart Instructions

AVJ42, W42A

C

Parts List

Non-slip mat

A x1 B x1 C x4

A

Cabinet comes
pre-assembled

on units that

include a cabinet.

Tools Required

- Phillips Screwdriver

- Rubber Mallet

- Pliers or Adjustable Wrench

D x4 E x4

A

E

D

B B B

1 2 3

Position the bottom shelf B so that the
caster holes are facing up. Insert caster C
into the caster holes on the bottom of shelf
B. Use a mallet to set the casters properly.

Flip bottom shelf B so that it is on its side.
Set top shelf A so that it overlaps bottom

shelf B. Align the screw holes so that the
top shelf A is at the desired height.

E

Insert screw D through the aligned screw hole

of A and B and fasten nut E with pliers and
screwdriver. Place Non-slip mat on desired
shelf. The cart is now complete.

D

01/31/13

www.luxorfurn.com
www.hwilson.com

Electric Assembly
Instructions

Number of outlets
may vary.

Parts List

Tools Required

- Screwdriver

A x1 B x1 C x2 D x2

D

D

(Plastic or Metal
Mounting Surface)

C

1

Push screw C through electric outlet A. Make sure
the electric outlet A and cord wrap B align with the

mounting surface screw holes. Push screw C through
cord wrap B and the mounting surface screw holes.
Use wing nut D and screwdriver to fasten.

B

A

C