Luxor X S1 Installation Instruction

Page 1
MR 16
LUXOR X S1
6 202 13 14
Application
Finishing section to be used with DELTA LIGHT rough-in housing.
Ceiling Thickness
For 5⁄8" ceiling standard up to 7⁄8”
For one max 50W MR16 lamp (not included)
Voltage
12V AC
Connector
Housing and trim connection through pre-installed snap-in connector
Specification features
Housing fabricated of stainless steel Pre-installed springs for easy installation Gx5.3 lampholder Suitable for damp location
Dimensions
Height: 100 mm = 3”- 15/16 Diameter: Ø 90 mm = 3”- 9/16 Ceiling Cut out: Ø 79 mm = 3”- 1/8
Compatible Rough-in Housings required
6 202 103 03 XX NC NIC AT M Hal max 75W EMP 03
6 202 104 03 XX NC NIC AT M Hal max 75W SC EMP 03
HEADQUARTERS - www.deltalight.com - USA - www.deltalight.us - CANADA - www.deltalight.ca
1
Last Update ALLU 31/05/2016
NORTH AMERICAN EDITION
Installation instruction LUXOR X S1
= INOX
Conforms to ANSI/UL Std. 1598 Cert. to CAN/CSA Std. 22.2 No. 250.0
3”- ⁄
100 mm
Ø 3” ⁄
Ø 90 mm
NIC
350°
30°
Page 2
Installation instruction LUXOR X S1
2
NORTH AMERICAN EDITION
HEADQUARTERS - www.deltalight.com - USA - www.deltalight.us - CANADA - www.deltalight.ca
INSTALLATION LUMINAIRE
A
B
A
B
SAVE!
B
A
Rough-in Housing
Required
Click!
1 2
a b c
3 4
Not Supplied
A
B
REMOVE RING
C
D
PULL LAMP HOLDER
PLACE LAMP
PLACE RING
Accessory set
!
WHITE FINISH: MAX 35W
Loading...