LUX LUMEN 24ch LED, 10104 Driver Manual
Voltage LED driver
24 channel
10104
Voltage LED driver 24 ch p.2/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
CONTENT
1 PICTURE .................................................................................. 3
1.1 G
ENERAL
....................................................................................... 3
1.2 TOP ............................................................................................. 3
2 DIMENSIONS ........................................................................... 4
3 SAFETY INFORMATION ............................................................ 5
3.1 S
YMBOLS
...................................................................................... 5
3.2 P
ROTECTION FROM ELECTRIC SHOCK
....................................................... 6
3.3 P
ROTECTIONS FROM FIRE AND BURNS
...................................................... 7
3.4 P
ROTECTION FROM INJURY
.................................................................. 7
3.5 D
ISPOSING OF THIS PRODUCT
.............................................................. 7
4 PHYSICAL INSTALLATION ....................................................... 8
4.1 U
NPACKING
.................................................................................... 8
4.2 L
OCATION AND ORIENTATION
............................................................... 8
4.3 M
OUNTING
..................................................................................... 8
5 EXTERNAL CONNECTIONS...................................................... 10
5.1 DC
POWER INPUT
........................................................................... 10
5.2 DC
POWER OUTPUTS
....................................................................... 12
5.3 R
EMOTE ADDRESSING BOARD INPUT
..................................................... 13
5.4 DMX
IN AND OUTPUT
...................................................................... 15
6 EMC AND SAFETY REQUIREMENTS. ........................................ 18
7 CARD CONFIGURATION ......................................................... 19
7.1 DMX
START ADDRESS SETTING
........................................................... 19
7.2 S
TAND ALONE OPERATION OF THE CARD
................................................. 20
8 SERVICE AND MAINTENANCE ................................................ 22
8.1 S
AFETY PRECAUTIONS
...................................................................... 22
8.2 C
LEANING
.................................................................................... 22
8.3 M
ONITORING
................................................................................ 22
9 TROUBLESHOOTING .............................................................. 24
10 SPECIFICATIONS ................................................................ 25
10.1 E
LECTRICAL
.................................................................................. 25
10.2 E
NVIRONMENTAL
............................................................................ 25
10.3 E
XTRA FEATURES
........................................................................... 25
10.4 M
ECHANICAL
................................................................................ 26
11 WARRANTY ......................................................................... 27
11.1 A
PPLICATION OF WARRANTY
............................................................... 27
11.2 RMA
PROCEDURE
........................................................................... 29
12 USED LIST OF ABBREVIATIONS .......................................... 30
Voltage LED driver 24 ch p.3/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
1
Picture
1.1 General
1.2 Top
Voltage LED driver 24 ch p.4/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
2
Dimensions
Please note, dimensions given are din-rail included.
Voltage LED driver 24 ch p.5/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
3
Safety information
Before installing, powering up, or servicing this led-driver card, it
is highly recommended that you read this manual and ensure
yourself that you completely understand its content. Observe the
safety precautions in this manual. Install and operate the led
driver only as described in this manual, and in conformity with
local regulations. If you have any questions how to operate this
product safely, please contact your point of sale.
3.1 Symbols
Following symbols are used to identify important safety
information on the product and in this manual.
Voltage LED driver 24 ch p.6/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
3.2 Protection from electric shock
Although this card itself does not operate with dangerous
voltages, the installation in which is intended to be used, can
contain dangerous voltages. Shut down the power of the
complete installation before carrying out any installation, or
maintenance work.
Please note that all metal parts used in the enclosure, where this
card is mounted are firmly grounded.
Use only AC to DC power sources, suitable for the application
and conform to local regulations. Please ensure yourself that the
AC to DC power supply is able to deliver the rated current
requirements of the installation.
If any cable, seal or housing is damaged, cracked or reformed,
disconnect the power of the installation immediately.
The led-driver card is only to be used in a proper housing
conform to local regulations.
For any additional servicing, not described in this manual, please
contact your point of sale.
Voltage LED driver 24 ch p.7/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
3.3 Protections from fire and burns
Do not operate this led-driver card if ambient temperatures,
inside its enclosure, is above 45 °C (113 °F). Please ensure
yourself that sufficient ventilation around the card is possible.
It might be necessary to allow the led-driver card to cool down
for 5 minutes, before servicing.
Do not modify the card, in a way, not described in this manual.
Never bypass the fuse or change the fuse with another type or
value as is rated in this manual.
3.4 Protection from injury
Ensure yourself that all components, covers are securely
fastened. Verify that the card is firmly clicked on a standard dinrail.
3.5 Disposing of this product
This led-driver card is manufactured in compliance with directive
of the European community: waste electrical and electronically
equipment. Please help to preserve our environment and ensure
that this product will be recycled properly at the end of its life.
Voltage LED driver 24 ch p.8/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
4
Physical installation
Thank you for selecting this led-driver card as best solution in
your setup.
Warning! Read the safety precautions in this manual before
integrating this card into your installation.
Installation must be carried out by qualified professionals only.
Assure yourself that there is sufficient and unrestricted air flow
around the led-driver card.
4.1 Unpacking
The following items are included in your package:
• Led driver-card
• Carton box package
• Short form manual
4.2 Location and orientation
This led-driver card cannot be used without additional protective
housing. The housing protects the user against electrical shocks
and it is protecting the card against climatologically influences.
Please assure yourself that the cabinet, which houses the leddriver card is according to local regulations and laws of the
country of installation.
It is advised to install the card in horizontal position on the dinrail.
4.3 Mounting
The LED driver can be mounted on a standard 35 mm top hat
din-rail. A typical section of this din-rail can be found here:
Note: Use end blocking clamps if necessary in your application.
Voltage LED driver 24 ch p.9/30
LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM
T: +32 3 293 35 50 – F: +32 3 293 35 44
www.lux-lumen.com
The LED driver card is designed for architectural purposes in
fixed installation. To remove the LED driver card from the dinrail, gently move the mounting clip like indicated below:
If the product is used in a situation where heavy mechanical
shocks can be expected, we advise to remove the plastic din-rail
enclosure and bolt the LED driver PCB directly on a metal base.
Use bolts and nuts M3 to attach the LED driver. Use proper
spacers to avoid electrical contact between solder pads, and the
metal parts of the housing.
Assure yourself that no metal parts of screws or bolts make
contact with the electrical circuits on the printed circuit board.
The seven mounting holes can be found below in the red color:
In case of problems or doubts, please contact your point of sale.
Loading...