Luxibel LX496 User Manual
LX496
2-LAYER SWITCHER AND SCALER
USER MANUAL
LX496
V. 01 – 30/07/2014 2 ©Velleman nv
Menu Structure
LX496
V. 01 – 30/07/2014 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Luxibel®! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never
put objects filled with liquids on top of or close to the device.
Risk of electroshock when opening the cover. Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by
qualified personnel.
Do not operate the device without the cover installed.
Warning: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent,
or similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage stated in the specifications in this
manual.
Always disconnect mains power when device not in use or when servicing or maintenance activities
are performed. Handle the power cord by the plug only.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service
and/or spare parts.
Do not use near inflammable products or in explosive atmospheres.
This device falls under protection class I. It is therefore essential that the device be earthed. Have a
qualified person carry out the electric connection.
The maximum ambient temperature is 45 °C. Do not operate the device at higher temperatures.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
LX496
V. 01 – 30/07/2014 4 ©Velleman nv
4. Features
The LX496, incorporating VXP image processing technology, is a high-performance video scaler, scan convertor,
switcher and transcoder processor all in one. It is the ideal solution for converting RGB, HDTV, component, Svideo, composite (NTSC, PAL and SECAM), DVI (HDMI® compatible), SDI (SD/HD/3G compatible) into a userselectable video format.
The LX496 works as a real seamless, 2-layer switcher with a loop out for each input. All inputs support loop
trough output. It combines truly seamless, glitch-free switching with advanced scaling technology to meet the
requirements of high-quality, high-resolution video presentation. The LX496 is designed to deliver advanced
capabilities to high-end presentation environments.
3G/HD/SD SDI input
1 composite, 1 S-Video input
1 component input
VGA input support RGBHV / RGBS / RGSB
1 DVI input support 1080p video and 1600 x 1200, HDMI
®
1.3 compatible input, support video and graphic
input
1 DisplayPort (DP) input
5 audio inputs
1 DVI and 1 VGA output
1 XLR audio output
user-defined aspect ratio conversion and adjustment
pan and zoom
freeze
10-bit process
motion adaptive and field-to-frame de-interlacing modes
3.2 pull-down detection for NTSC and 2.2 film detection for PAL video source
decodes NTSC, PAL and SECAM
RS-232, USB, and Ethernet remote control
LED sending card (Linsn TS802) already installed
3 saving modes
3 independent memory presets
5. Application Scheme
LX496
V. 01 – 30/07/2014 5 ©Velleman nv
6. Hardware Installation
Dimensions
The image below shows the dimensions of the device.
Precautions and Site Preparation
Before installation, please observe the following important safety and handling rules to avoid damage to the
equipment and personal injury.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power cord.
The mains plug should always remain readily operable. Unplug the power supply cord from the mains to
disconnect the device.
The environment where you install the device shall be clean, properly lit, free from static, and have
adequate power, ventilation, and sufficient space for all components.
Installation
The LX496 video scan convertor and scaler is designed to be rack-mounted. Before mounting this device, make
sure to read chapters 2. Safety Instructions and 3. General Guidelines first.
To install the device:
1. Mount in a 2U 19" rack.
2. Leave 1" (2.5 cm) on all sides to ensure proper ventilation.
3. Mount this device near PC for easy connection and setup.
Loading...