Luxibel LX161, LX160, LX164 User Manual

LX161
COBPAR 100CWW - COLD / WARM WHITE COB LED
LX161
V. 02 – 07/11/2014 2 ©Velleman nv
LX161
V. 02 – 07/11/2014 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Luxibel®! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Keep this device away from children and unauthorized users.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children shall be supervised to ensure that they do not play with the appliance.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquids on top of or close to the device.
Risk of electroshock when opening the cover. Touching live wires can cause life­threatening electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
DO NOT disassemble or open the cover under any circumstances. Touching live wires can cause life-threatening electroshocks.
Do not crimp the power cord and protect it against damage. Warning! If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid any hazard.
Always disconnect mains power when the device is not in use or when servicing or performing maintenance activities. Handle the power cord by the plug only.
DO NOT disassemble or open the cover. There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
Do not stare directly at the light source, as this may cause
epileptic seizure in sensitive people temporarily loss of sight (flash blindness) permanent (irreversible) eye damage.
Do not use the device when noticing damage to housing or cables. Do not attempt to service the device yourself but contact an authorised dealer.
This is a Safety Class I device.
Loading...
+ 5 hidden pages