Instruction Manual
Product Name: 3D Heart Solar Light Stake
SKU #: WHSL470
Thank you for purchasing this Winsome House product. This product has been manufactured with the
highest standards of safety and quality.
Please save this manual for future reference.
Instructions:
First assemble the solar light. Make sure that the solar panel is facing up.
The on/off switch is located on the underside of the solar panel. To use, turn the on/off switch to the on
position.
For best results, allow to charge in direct sunlight for a minimum of 8 hours.
After fully charged, product will automatically light at night when turned on.
To extend battery life, turn to the off position when not in use.
To replace the battery, use a screwdriver to unscrew the bottom panel from the solar light. Replace
rechargeable battery with the same type of battery.
Battery: Rechargeable AAA Ni-Mh 200mAh 1.2V 1pc (included)
Instruction Manual
Product Name: 3D Heart Solar Light Stake
SKU #: WHSL470
Trouble Shooting Tips:
If your solar light does not turn on at night, it may be caused by the following:
Check to see if the switch is in the “OFF” position.
Resolution: Push the switch to the “ON” position and allow the solar light to be charged for at least 8
hours in direct sunlight.
Battery may not be fully charged.
Resolution: Make sure the solar light is placed in an area where the solar panel receives the maximum
amount of full direct sunlight every day.
The solar light may be located too close to other light sources (such as porch light or street lantern).
Resolution: Relocate away from external light source.
The rechargeable battery may need to be replaced.
Resolution: Replace with batteries of identical specification.
Please save this manual for future reference.
Loading...