Luxaire TC4B18 THRU 60 Technical Manual

FOR INSTALLATION ONLY IN US SOUTHEAST

®

TECHNICAL GUIDE

LX

SERIES

AND NORTHERN REGIONS AND CANADA

SPLIT SYSTEM
AIR CONDITIONERS

Installation Allowed

14 SEER – R-410A – 1 PHASE

1.5 THRU 5 NOMINAL TONS

MODELS: TC4B18 THRU 60

Due to continuous product improvement, specifications
are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.luxaire.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY*

Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement

or closing for new home construction.

*Does not apply to R-22 models, 3-Phase models, or Internet sales.

See Limited Warranty certificate in User's Information Manual for details.

5005753-LTG-B-1215

DESCRIPTION

The TC4B models are the newest addition to our successful LX
Series split system air conditioner lineup. Optimized for the new
14 SEER Regional Minimum Efficiency in the Southeast US,
these outdoor units are specifically designed to be matched
with Johnson Controls Unitary Products indoor coils, furnaces,
and air handlers to provide a complete system solution.

FEATURES

• Small Footprint - Minimum footprint for easier handling,
transportation, and installation.

• Easier Installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
power and control wiring access. Select indoor matches with
factory-mounted TXVs are available for quicker system
installation. The factory installed filter-drier and factory
charge for a 15-Ft lineset means less time spent brazing and
charging the system. The small base dimension and reduced
unit clearances make for easier retrofits.

• Accessible Information - QR code on unit provides quick
access to technical documents and warranty information.

• Durable Finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galva­nized steel chassis components resist corrosion and rust
creep. Titanium colored powdercoat paint further protects
external panels.

• Quality Coils - The high efficiency microchannel aluminum
coil is manufactured using an improved material system pro­viding reliable performance and small unit size.

• Rugged Coil Protection - Coils are protected from mechan­ical damage by a proven stamped steel coil guard design.

• Protected Compressor - Compressors are protected inter­nally by a high pressure relief valve and a temperature sen­sor, and externally by the system high pressure switch. The
liquid line filter-drier is factory installed to protect the com­pressor against moisture and debris.

• Reliable Operation - Ball bearing fan motors provide supe­rior performance in extreme temperatures.

• Environmentally Friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.

• Top Discharge - Warm air is blown up, away from the struc-
ture and any landscaping and allows compact location on
multi-unit applications.

• Low Operating Sound Levels - Developed using CFD and
FEA tools, the sturdy cabinet and top design provides sound
performance of 76 dBA or lower. Compatible accessories for
further sound reduction are also available.

• Better Service Access - Diagonal base valves with open
access for low-loss fittings, single panel access to the electri­cal controls, swing out control box for full corner access, and
removable fan guard allow easy access for unit mainte­nance.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

5005753-LTG-B-1215

LIST OF SECTIONS

DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PHYSICAL AND ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . 3

DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS . . . . . . . 4

COOLING CAPACITY - With Air Handler Coils . . . . . . . . . . . . . . . 5

COOLING CAPACITY - Upflow, Downflow &

Horizontal Furnaces and Coils (Coil Only Ratings) . . . . . . . . . . . 9

COOLING CAPACITY - With High Efficiency Motor Furnaces . . 11

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SOUND POWER RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 42

TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

TYPICAL FIELD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

ALTERNATIVE INSTALLATION CLEARANCES . . . . . . . . . . . . . . 44

PERFORMANCE DATA - 1.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 45

PERFORMANCE DATA - 2 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 48

PERFORMANCE DATA - 2.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 52

PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 56

PERFORMANCE DATA - 3.5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 60

PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 65

PERFORMANCE DATA - 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . . 69

FURNACE MULTIPLIERS- 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . 70

NOMENCLATURE

BRAND

PRODUCT TYPE

NOMINAL
SERIES EFFICIENCY
AND STAGING

REFRIGERANT

NOMINAL
UNIT CAPACITY
(MBH)

VOLTAGE
(Voltage-Phase-Hertz)

GENERATION
(MAJOR REVISION)

FACTORY OPTION
STYLE LETTER

(MINOR REVISION)
NOT USED
FOR ORDERING

T

T = Factory Branded
C = Air Conditioner (US Northern or

Southeast Region)
H = Heat Pump

C

F = Fin & Tube Air Conditioner
W = High EER US Southwest Region

Air Conditioner
3 = 13 SEER / 1-Stage (US Northern

Region)

4

4 = 14 SEER / 1-Stage (US Southeast
or Southwest Region)

B

B = R-410A
18 = 1.5 Ton 42 = 3.5 Ton

24 = 2 Ton 48 = 4 Ton

36

30 = 2.5 Ton 60 = 5 Ton
36 = 3 Ton

2

2 = 208/230-1-60
1 = 1st Gen

1

2 = 2nd Gen
etc
S = Standard (No Options)

S

H = Hard Start Kit
A = Style A

A

B = Style B

2 Johnson Controls Unitary Products

5005753-LTG-B-1215

PHYSICAL AND ELECTRICAL DATA

MODEL TC4B1821H TC4B2421H TC4B3021H TC4B3621H TC4B4221H TC4B4821S TC4B6021S

Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range

1

Minimum Circuit Ampacity 10.2 11.6 14.2 18.9 21.5 25.7 31.7
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps

2

3

15 20 20 30 35 45 50

15 15 15 20 25 30 35
Compressor Type Recip Recip Recip Recip Recip Scroll Scroll
Compressor

Amps

Rated Load 7.7 8.6 10.7 14.1 16.2 19.5 24.3

Locked Rotor 45.0 45.0 57.0 78.0 88.0 130.0 144.2
Crankcase Heater No No No No No No No
Factory External Discharge Muffler No No No No Yes No No

HS Kit Required with TXV

4

Yes* Yes* Yes* Yes* Yes* No No

Fan Diameter Inches 18 22 22 22 24 24 26

Rated HP 1/12 1/8 1/8 1/4 1/4 1/4 1/4
Fan Motor

Rated Load Amps 0.64 0.80 0.80 1.30 1.30 1.30 1.30

Nominal RPM 1000 1075 1075 850 850 850 850

Nominal CFM 1900 2875 2950 3275 3500 3500 4300

Face Area Sq. Ft. 12.37 13.83 13.83 17.37 18.74 18.74 23.40
Coil

Rows Deep 1111111

Fins / Inch 23 23 23 23 23 23 23
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8

5

Vapor Line Set OD (Field Installed)
Unit Charge (Lbs. - Oz.)

6

3/4 3/4 3/4 3/4 7/8 7/8

3 - 14 3 - 12 4 - 3 4 - 14 5 - 2 4 - 15 5 - 12
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 0.75
Operating Weight Lbs. 140 155 155 180 215 200 205

* Models with "H" on the end of the model number are shipped with a Hard Start Kit installed at the factory.

1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.

2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.

5. For applications with non-standard vapor line sizes, see the “Applications & Accessories” section of this Technical Guide.

6. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in actual lineset length (not the equivalent length) multiplied by the per foot value.

187 to 252

1-1/8

‡

DIMENSIONS

C

Unit

Model

TC4B1821H
TC4B2421H

A

TC4B3021H
TC4B3621H
TC4B4221H
TC4B4821S

Dimensions

(Inches)

A B C Liquid Vapor

33-1/4 24 24

30 29-1/4 29-1/4

30 29-1/4 29-1/4
36-1/4 29-1/4 29-1/4
33-1/4 35-1/4 31-3/4
33-1/4 35-1/4 31-3/4

TC4B6021S 36-1/4 38 34-1/4

‡ Adapter fitting must be field installed for the required 1-1/8” line set.

B

A0339-001

All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.

Johnson Controls Unitary Products 3

Refrigerant Connection

Service Valve Size

3/4

3/8

7/8

‡

7/8

5005753-LTG-B-1215

SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS

Outdoor Unit TC4B1821H TC4B2421H TC4B3021H TC4B3621H TC4B4221H TC4B4821S TC4B6021S
Required TXV

1,2

BA1 BA1 BB1 BC1 BC1 BC1 BD1

Indoor Unit

3,4,5

Additional Charge, oz

AP18B 0––––––
AP24B 30–––––
AP30B 10 72––––
AP36B 10 720–––
AP36C – 11 22–––
AP42C – 11 220––
AP48(C,D) –––520–
AP60(C,D) ––––920
AE18B 0––––––
AE24B 30–––––
AE30B 850––––
AE36(B,C) 10 720–––
AE42C –––52––
AE48(C,D) –––520–
AE60C ––––920
AE60D ––––292220
AVC18B 0––––––
AVC24B 30–––––
AVC30B 850––––
AVC36(B,C) 10 720–––
AVC42C –––52––
AVC48(C,D) –––520–
AVC60C ––––920
AVC60D ––––292220
CF/CM/CU18(A,B) 0––––––
CF/CM/CU24(A,B) 30–––––
CF/CM/CU30(A,B,C) 850––––
CF/CM/CU36(A,B,C) 10 720–––
CF/CM/CU42(B,C,D) – 11 220––
CF/CM/CU48(C,D) –––520–
CF/CM/CU60(C,D) ––––920
CF/CM64D ––––292220
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil

only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.

FOOTNOTES:

1. For applications requiring a TXV, use S1-1TVM*** series kit.

2. A TXV kit must be used with these indoor units to obtain system performance.

3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.

4. CF coils cannot be used in horizontal applications.

5. Charge adders shown above do not indicate that coils are rated for every application. Refer to Performance Data Tables for actual performance for specified sys­tem matches. Obtain certified system ratings from www.ahridirectory.org.

CHARGING PROCEDURES:

1. Check the Factory Unit Charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit, and the 15 feet
of interconnecting lineset.

2. Verify the indoor metering device and additional charge required for the specific matched indoor unit in the system using the above table.

3. Add additional charge for the amount of interconnecting lineset greater than 15 feet at the rate specified in the Physical and Electrical Table.

4. For installations requiring additional charge, weigh in refrigerant for the specific matching indoor unit and actual lineset length.

5. Once the charge adders for matched indoor unit and for lineset have been weighed in, verify the system operation against the temperatures and pressures in the
Charging Chart for the outdoor unit. Locate Charging Charts on the outdoor unit and also in the Service Data Application Guide on www.upgnet.com. Follow the
Subcool or the Superheat charging procedure in the Installation Manual according to the type of indoor metering device in the system, and allow ten minutes after
each charge adjustment for the system operation to stabilize. Record the charge adjustment made to match the Charging Chart.

6. Permanently stamp the unit data plate with the TOTAL SYSTEM CHARGE defined as follows: TOTAL SYSTEM CHARGE = Base Charge (as shipped) + charge
adder for matched indoor unit + charge adder for actual lineset length + charge adjustments to match the Charging Chart.

4 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With Air Handler Coils

UNIT

MODEL

TC4B1821H AE18BX21 17.5 – 600 18.0 12.7 15.75 12.75
TC4B1821H AE24BX21 17.5 – 600 18.0 12.7 15.75 12.75
TC4B1821H AE30BX21 17.5 – 600 18.0 12.9 16.00 13.00
TC4B1821H AE36BX21 17.5 – 600 18.0 12.4 14.75 12.25
TC4B1821H AE36CX21 21.0 – 600 18.0 12.3 15.00 12.50
TC4B1821H AP18BX21 17.5 – 600 18.0 12.6 14.25 12.00
TC4B1821H AP24BX21 17.5 – 600 18.0 12.6 14.00 11.75
TC4B1821H AP30BX21 17.5 – 600 18.0 12.5 14.25 12.00
TC4B1821H AVC18BX21 17.5 – 600 18.0 12.7 15.75 12.75
TC4B1821H AVC24BX21 17.5 – 600 18.0 12.7 16.00 13.25
TC4B1821H AVC30BX21 17.5 – 600 18.0 12.7 16.00 13.00
TC4B1821H ME08BN21 17.5 CF/CM18B 600 18.0 12.7 16.00 13.00
TC4B1821H ME08BN21 17.5 CF/CM24B 600 18.0 12.7 16.00 13.25
TC4B1821H ME08BN21 17.5 CF/CM30B 600 18.0 12.7 16.00 13.25
TC4B1821H ME08BN21 17.5 CF/CM36B 600 18.0 12.6 16.00 13.00
TC4B1821H ME12BN21 17.5 CF/CM18B 600 18.0 12.6 14.50 12.25
TC4B1821H ME12BN21 17.5 CF/CM24B 625 18.0 12.8 14.75 12.25
TC4B1821H ME12BN21 17.5 CF/CM30B 625 18.0 12.9 15.00 12.25
TC4B1821H ME12BN21 17.5 CF/CM36B 650 18.0 12.9 15.25 12.75
TC4B1821H MVC08BN21 17.5 CF/CM18B 550 18.0 12.4 15.75 12.75
TC4B1821H MVC08BN21 17.5 CF/CM24B 575 18.0 12.5 16.00 13.00
TC4B1821H MVC08BN21 17.5 CF/CM30B 600 18.0 12.7 16.00 13.00
TC4B1821H MVC12BN21 17.5 CF/CM36B 675 18.0 13.1 16.00 13.00
TC4B2421H AE24BX21 17.5 – 800 23.8 16.8 15.75 12.75
TC4B2421H AE30BX21 17.5 – 800 24.0 16.8 16.00 13.00
TC4B2421H AE36BX21 17.5 – 800 24.0 16.8 16.00 13.00
TC4B2421H AE36CX21 21.0 – 800 24.0 17.0 16.00 13.00
TC4B2421H AP24BX21 17.5 – 800 23.2 16.4 14.00 11.50
TC4B2421H AP30BX21 17.5 – 800 24.0 16.6 14.00 12.00
TC4B2421H AP36BX21 17.5 – 900 24.0 17.6 14.00 11.75
TC4B2421H AP36CX21 21.0 – 850 24.0 17.0 14.25 12.00
TC4B2421H AVC24BX21 17.5 – 750 23.4 16.2 15.50 12.75
TC4B2421H AVC30BX21 17.5 – 775 24.0 16.6 16.00 13.00
TC4B2421H AVC36BX21 17.5 – 800 24.0 16.8 16.00 13.00
TC4B2421H AVC36CX21 21.0 – 800 24.0 16.8 16.00 13.00
TC4B2421H ME08BN21 17.5 CF/CM24B 800 23.8 16.8 16.00 13.00
TC4B2421H ME08BN21 17.5 CF/CM30B 800 24.0 16.8 16.00 13.00
TC4B2421H ME08BN21 17.5 CF/CM36B 800 24.0 16.6 16.00 13.00
TC4B2421H ME08BN21 17.5 CF42B 800 24.0 16.8 15.75 12.75
TC4B2421H ME12BN21 17.5 CF/CM24B 800 23.8 16.8 15.75 12.75
TC4B2421H ME12BN21 17.5 CF/CM30B 800 24.0 16.8 15.75 12.75
TC4B2421H ME12BN21 17.5 CF/CM36B 800 24.0 16.8 16.00 13.00
TC4B2421H ME12BN21 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H ME14DN21 24.5 CF/CM30D 800 24.0 16.6 15.50 12.75
TC4B2421H ME14DN21 24.5 CF/CM36D 800 24.0 16.8 15.75 12.75
TC4B2421H ME14DN21 24.5 CF/CM42D 800 24.0 16.8 15.75 12.75
TC4B2421H ME16CN21 21.0 CF/CM24C 875 23.8 17.4 14.50 12.00
TC4B2421H MVC08BN21 17.5 CF/CM24B 800 23.8 16.8 15.75 12.75
TC4B2421H MVC08BN21 17.5 CF/CM30B 700 23.6 15.8 16.00 13.00

For Notes See Page 9.

AIR HANDLER

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 5

5005753-LTG-B-1215

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

TC4B2421H MVC08BN21 17.5 CF/CM36B 775 24.0 16.6 16.00 13.00
TC4B2421H MVC08BN21 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H MVC12BN21 17.5 CF/CM24B 800 23.8 16.8 15.75 12.75
TC4B2421H MVC12BN21 17.5 CF/CM30B 850 24.0 17.2 16.00 13.00
TC4B2421H MVC12BN21 17.5 CF/CM36B 775 24.0 16.6 16.00 13.00
TC4B2421H MVC12BN21 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H MVC14DN21 24.5 CF/CM30D 800 24.0 16.6 16.00 13.00
TC4B2421H MVC14DN21 24.5 CF/CM36D 850 24.0 17.2 16.00 13.00
TC4B2421H MVC14DN21 24.5 CF/CM42D 825 24.0 17.0 16.00 13.00
TC4B2421H MVC16CN21 21.0 CF/CM42C 900 24.0 17.6 16.00 13.00
TC4B3021H AE30BX21 17.5 – 1000 30.0 21.6 15.00 12.50
TC4B3021H AE36BX21 17.5 – 975 30.0 21.4 15.25 12.50
TC4B3021H AE36CX21 21.0 – 1000 30.0 21.2 15.75 12.75
TC4B3021H AP30BX21 17.5 – 1000 29.8 21.2 14.25 11.75
TC4B3021H AP36BX21 17.5 – 1000 30.0 21.2 14.00 11.75
TC4B3021H AP36CX21 21.0 – 1000 30.0 21.4 14.00 11.75
TC4B3021H AP42CX21 21.0 – 1100 30.0 22.2 14.00 11.75
TC4B3021H AVC30BX21 17.5 – 975 30.0 21.4 15.00 12.25
TC4B3021H AVC36BX21 17.5 – 975 30.0 21.6 15.75 12.75
TC4B3021H AVC36CX21 21.0 – 975 30.0 21.6 16.00 13.00
TC4B3021H ME08BN21 17.5 CF/CM30B 900 30.0 21.0 15.25 12.50
TC4B3021H ME08BN21 17.5 CF/CM36B 900 29.6 20.2 15.50 12.75
TC4B3021H ME08BN21 17.5 CF42B 875 29.6 20.4 15.25 12.75
TC4B3021H ME12BN21 17.5 CF/CM30B 825 29.6 19.6 15.25 12.50
TC4B3021H ME12BN21 17.5 CF/CM36B 1025 29.6 21.4 15.50 12.75
TC4B3021H ME12BN21 17.5 CF42B 975 29.8 21.2 15.25 12.50
TC4B3021H ME14DN21 24.5 CF/CM30D 1050 30.0 22.0 15.75 12.75
TC4B3021H ME14DN21 24.5 CF/CM36D 1025 30.0 21.6 15.75 12.75
TC4B3021H ME14DN21 24.5 CF/CM42D 1000 30.0 21.2 15.75 12.75
TC4B3021H ME16CN21 21.0 CF/CM30C 1075 30.0 21.8 15.00 12.50
TC4B3021H ME16CN21 21.0 CF/CM36C 1100 30.0 22.4 15.25 12.50
TC4B3021H ME16CN21 21.0 CF/CM42C 1000 30.0 21.2 14.75 12.25
TC4B3021H MVC08BN21 17.5 CF42B 825 30.0 20.0 15.00 12.50
TC4B3021H MVC12BN21 17.5 CF/CM30B 850 29.6 19.8 15.00 12.50
TC4B3021H MVC12BN21 17.5 CF/CM36B 1000 30.0 21.2 15.00 12.50
TC4B3021H MVC12BN21 17.5 CF42B 975 30.0 21.2 15.25 12.50
TC4B3021H MVC14DN21 24.5 CF/CM30D 925 30.0 21.0 15.75 12.75
TC4B3021H MVC14DN21 24.5 CF/CM36D 975 30.0 21.0 15.75 12.75
TC4B3021H MVC14DN21 24.5 CF/CM42D 1000 30.0 21.2 16.00 13.25
TC4B3021H MVC16CN21 21.0 CF/CM30C 925 30.0 21.0 15.75 12.75
TC4B3021H MVC16CN21 21.0 CF/CM36C 1025 30.0 21.6 15.75 12.75
TC4B3021H MVC16CN21 21.0 CF/CM42C 900 30.0 20.6 15.75 12.75
TC4B3021H MVC20DN21 24.5 CF/CM36D 1120 30.0 22.4 15.75 12.75
TC4B3021H MVC20DN21 24.5 CF/CM42D 1100 30.0 22.4 15.50 12.75
TC4B3621H AE36BX21 17.5 – 1000 34.4 23.0 14.75 12.25
TC4B3621H AE36CX21 21.0 – 1225 35.8 25.6 15.25 12.75
TC4B3621H AE42CX21 21.0 – 1200 35.8 25.6 15.25 12.50
TC4B3621H AE48CX21 21.0 – 1250 36.0 26.0 15.50 12.75
TC4B3621H AE48DX21 24.5 – 1225 36.0 25.8 15.50 12.75

For Notes See Page 9.

AIR HANDLER

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

6 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

TC4B3621H AP36BX21 17.5 – 1000 34.0 22.6 14.00 11.75
TC4B3621H AP36CX21 21.0 – 1225 35.0 25.2 14.00 11.75
TC4B3621H AP42CX21 21.0 – 1225 35.0 25.2 14.00 11.50
TC4B3621H AP48CX21 21.0 – 1200 35.2 24.8 14.00 11.75
TC4B3621H AP48DX21 24.5 – 1325 35.6 26.2 14.00 11.75
TC4B3621H AVC36BX21 17.5 – 1025 34.6 23.4 14.75 12.25
TC4B3621H AVC36CX21 21.0 – 1125 35.4 25.0 15.25 12.75
TC4B3621H AVC42CX21 21.0 – 1100 35.6 25.0 15.50 12.75
TC4B3621H AVC48CX21 21.0 – 1075 35.2 24.2 15.50 12.75
TC4B3621H AVC48DX21 24.5 – 1350 36.0 27.0 15.75 12.75
TC4B3621H ME12BN21 17.5 CF/CM36B 1025 34.6 23.4 14.75 12.25
TC4B3621H ME12BN21 17.5 CF42B 975 34.6 23.0 14.75 12.25
TC4B3621H ME14DN21 24.5 CF/CM36D 1250 36.0 26.0 15.50 12.50
TC4B3621H ME14DN21 24.5 CF/CM42D 1225 36.0 26.0 15.50 12.75
TC4B3621H ME14DN21 24.5 CF/CM48D 1200 36.0 25.6 15.50 12.75
TC4B3621H ME16CN21 21.0 CF/CM36C 1225 35.8 25.8 15.50 12.75
TC4B3621H ME16CN21 21.0 CF/CM42C 1225 35.8 26.0 15.50 12.75
TC4B3621H ME16CN21 21.0 CF/CM48C 1225 36.0 25.8 15.50 12.75
TC4B3621H ME20DN21 24.5 CF/CM36D 1325 35.6 26.6 14.50 12.00
TC4B3621H ME20DN21 24.5 CF/CM42D 1325 35.8 26.8 14.50 12.00
TC4B3621H ME20DN21 24.5 CF/CM48D 1325 36.0 26.6 14.75 12.25
TC4B3621H MVC08BN21 17.5 CF42B 975 34.4 22.8 14.50 12.25
TC4B3621H MVC12BN21 17.5 CF/CM36B 1025 34.4 23.2 14.50 12.25
TC4B3621H MVC12BN21 17.5 CF42B 975 34.6 23.0 14.50 12.25
TC4B3621H MVC14DN21 24.5 CF/CM36D 975 34.4 22.8 15.25 12.75
TC4B3621H MVC14DN21 24.5 CF/CM42D 1275 36.0 26.6 15.50 12.75
TC4B3621H MVC14DN21 24.5 CF/CM48D 1150 35.6 25.0 15.50 12.75
TC4B3621H MVC16CN21 21.0 CF/CM36C 1100 35.0 24.2 15.25 12.75
TC4B3621H MVC16CN21 21.0 CF/CM42C 1250 36.0 26.2 15.50 12.75
TC4B3621H MVC16CN21 21.0 CF/CM48C 1200 36.0 25.6 15.50 12.75
TC4B3621H MVC20DN21 24.5 CF/CM36D 1120 35.2 24.6 15.50 12.75
TC4B3621H MVC20DN21 24.5 CF/CM42D 1200 35.6 25.6 15.25 12.50
TC4B3621H MVC20DN21 24.5 CF/CM48D 1200 36.0 25.6 15.50 12.75
TC4B4221H AE42CX21 21.0 – 1375 41.5 31.0 14.75 12.25
TC4B4221H AE48CX21 21.0 – 1225 41.0 29.0 15.25 12.75
TC4B4221H AE48DX21 24.5 – 1225 41.0 29.0 15.50 12.75
TC4B4221H AE60CX21 21.0 – 1425 42.0 32.5 15.00 12.50
TC4B4221H AE60DX21 24.5 – 1400 42.0 31.5 15.75 12.75
TC4B4221H AP42CX21 21.0 – 1225 40.0 28.5 14.00 11.50
TC4B4221H AP48CX21 21.0 – 1300 40.5 29.5 14.00 11.75
TC4B4221H AP48DX21 24.5 – 1350 41.0 30.0 14.00 11.75
TC4B4221H AP60CX21 21.0 – 1400 41.0 30.5 14.00 11.25
TC4B4221H AP60DX21 24.5 – 1400 41.0 30.5 14.00 11.25
TC4B4221H AVC42CX21 21.0 – 1275 41.0 29.5 14.75 12.25
TC4B4221H AVC48CX21 21.0 – 1225 41.0 29.0 15.00 12.50
TC4B4221H AVC48DX21 24.5 – 1300 41.5 30.0 15.50 12.75
TC4B4221H AVC60CX21 21.0 – 1275 41.5 30.0 15.25 12.50
TC4B4221H AVC60DX21 24.5 – 1200 41.5 29.5 15.25 12.75

For Notes See Page 9.

AIR HANDLER

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 7

5005753-LTG-B-1215

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

TC4B4221H ME14DN21 24.5 CF/CM42D 1400 41.5 31.0 15.00 12.50
TC4B4221H ME14DN21 24.5 CF/CM48D 1400 41.5 31.0 15.00 12.50
TC4B4221H ME14DN21 24.5 CF/CM60D 1225 41.0 29.5 15.50 12.75
TC4B4221H ME14DN21 24.5 CF/CM64D 1375 42.0 31.5 15.50 12.75
TC4B4221H ME16CN21 21.0 CF/CM42C 1400 41.5 31.0 14.75 12.25
TC4B4221H ME16CN21 21.0 CF/CM48C 1225 41.0 29.0 15.25 12.75
TC4B4221H ME16CN21 21.0 CF/CM60C 1225 41.0 29.5 15.50 12.75
TC4B4221H ME20DN21 24.5 CF/CM42D 1450 42.0 32.0 15.00 12.50
TC4B4221H ME20DN21 24.5 CF/CM48D 1475 42.0 32.0 15.25 12.75
TC4B4221H ME20DN21 24.5 CF/CM60D 1425 42.0 32.0 15.25 12.75
TC4B4221H ME20DN21 24.5 CF/CM64D 1400 42.0 31.5 15.50 12.75
TC4B4221H MVC12BN21 17.5 CF42B 1175 40.0 27.5 14.00 11.75
TC4B4221H MVC14DN21 24.5 CF/CM42D 1375 41.5 31.0 15.00 12.50
TC4B4221H MVC14DN21 24.5 CF/CM48D 1325 41.5 30.5 15.25 12.75
TC4B4221H MVC14DN21 24.5 CF/CM60D 1225 41.0 29.5 15.25 12.50
TC4B4221H MVC14DN21 24.5 CF/CM64D 1325 42.0 31.0 15.50 12.75
TC4B4221H MVC16CN21 21.0 CF/CM42C 1250 40.5 29.5 15.00 12.50
TC4B4221H MVC16CN21 21.0 CF/CM48C 1275 41.0 30.0 15.25 12.50
TC4B4221H MVC20DN21 24.5 CF/CM42D 1225 40.5 29.0 14.75 12.25
TC4B4221H MVC20DN21 24.5 CF/CM48D 1300 41.5 30.0 15.25 12.50
TC4B4221H MVC20DN21 24.5 CF/CM60D 1250 41.0 30.0 15.75 12.75
TC4B4221H MVC20DN21 24.5 CF/CM64D 1250 42.0 30.0 15.50 12.75
TC4B4821S AE48CX21 21.0 – 1425 47.0 33.5 15.75 12.75
TC4B4821S AE48DX21 24.5 – 1425 47.0 34.0 15.75 12.75
TC4B4821S AE60CX21 21.0 – 1425 47.5 34.5 15.75 12.75
TC4B4821S AE60DX21 24.5 – 1400 48.0 34.5 16.00 13.00
TC4B4821S AP48CX21 21.0 – 1300 48.0 33.5 14.00 11.75
TC4B4821S AP48DX21 24.5 – 1600 47.5 34.0 14.00 11.75
TC4B4821S AP60CX21 21.0 – 1600 48.0 36.5 14.00 12.00
TC4B4821S AP60DX21 24.5 – 1600 48.0 36.0 14.00 11.75
TC4B4821S AVC48CX21 21.0 – 1350 48.0 34.0 15.25 12.50
TC4B4821S AVC48DX21 24.5 – 1350 48.0 34.5 15.75 12.75
TC4B4821S AVC60CX21 21.0 – 1350 48.0 34.5 15.75 12.75
TC4B4821S AVC60DX21 24.5 – 1475 48.0 35.0 15.75 12.75
TC4B4821S ME14DN21 24.5 CF/CM60D 1425 48.0 34.5 15.75 12.75
TC4B4821S ME14DN21 24.5 CF/CM64D 1375 48.0 34.0 16.00 13.00
TC4B4821S ME16CN21 21.0 CF/CM48C 1475 48.0 35.5 15.75 12.75
TC4B4821S ME16CN21 21.0 CF/CM60C 1450 48.0 35.0 15.75 12.75
TC4B4821S ME20DN21 24.5 CF/CM48D 1475 48.0 35.5 15.75 12.75
TC4B4821S ME20DN21 24.5 CF/CM60D 1400 48.0 34.5 15.75 12.75
TC4B4821S ME20DN21 24.5 CF/CM64D 1425 48.0 35.0 16.00 13.00
TC4B4821S MVC14DN21 24.5 CF/CM48D 1325 48.0 33.5 15.50 12.75
TC4B4821S MVC14DN21 24.5 CF/CM60D 1350 48.0 33.5 15.75 12.75
TC4B4821S MVC14DN21 24.5 CF/CM64D 1325 48.0 33.5 16.00 13.00
TC4B4821S MVC16CN21 21.0 CF/CM48C 1425 48.0 34.5 15.50 12.75
TC4B4821S MVC16CN21 21.0 CF/CM60C 1650 48.0 37.0 16.00 13.00
TC4B4821S MVC20DN21 24.5 CF/CM48D 1450 48.0 35.0 15.50 12.75
TC4B4821S MVC20DN21 24.5 CF/CM60D 1475 48.0 35.5 15.75 12.75
TC4B4821S MVC20DN21 24.5 CF/CM64D 1375 48.0 34.0 16.00 13.00

For Notes See Page 9.

AIR HANDLER

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

8 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

AIR HANDLER

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

TOTAL SENS.

TC4B6021S AE60CX21 21.0 – 1625 56.0 40.0 14.25 12.00
TC4B6021S AE60DX21 24.5 – 1775 57.5 42.0 14.25 12.25
TC4B6021S AVC60CX21 21.0 – 1750 56.5 41.5 14.00 12.00
TC4B6021S AVC60DX21 24.5 – 1650 57.5 41.0 14.75 12.25
TC4B6021S ME16CN21 21.0 CF/CM60C 1625 56.0 40.0 14.50 12.25
TC4B6021S ME20DN21 24.5 CF/CM60D 1650 56.5 40.0 14.50 12.25
TC4B6021S ME20DN21 24.5 CF/CM64D 1625 57.5 40.5 14.75 12.25
TC4B6021S MVC16CN21 21.0 CF/CM60C 1650 57.0 40.5 15.50 12.75
TC4B6021S MVC20DN21 24.5 CF/CM60D 1700 56.0 40.0 14.50 12.00
TC4B6021S MVC20DN21 24.5 CF/CM64D 1700 57.0 40.5 14.75 12.25

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.

SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total
electric power input in watt-hours during the same period.

1. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.

MP Modular Air Handlers use Coil Only Ratings.

COOLING

NET MBH

SEER EER

COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)

COIL

UNIT MODEL

MODEL WIDTH

CFM RANGE

(MIN.-MAX.)

RATED

CFM

TOTAL SENS.

TC4B1821H CF/CM/CU18A 14.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU18B 17.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU24A 14.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU24B 17.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU24C 21.0 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU30A 14.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU30B 17.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU30C 21.0 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU30D 24.5 450 - 750 600 18.0 12.6 14.00 11.75
TC4B1821H CF/CM/CU36B 17.5 450 - 750 600 18.0 12.5 14.25 12.00
TC4B1821H CF/CM/CU36C 21.0 450 - 750 600 18.0 12.5 14.25 12.00
TC4B1821H CF/CM/CU36D 24.5 450 - 750 600 18.0 12.5 14.25 12.00
TC4B1821H CF/CM36A 14.5 450 - 750 600 18.0 12.5 14.25 12.00
TC4B2421H CF/CM/CU24A 14.5 600 - 1000 800 23.0 16.0 14.00 11.75
TC4B2421H CF/CM/CU24B 17.5 600 - 1000 800 23.2 16.2 14.00 11.75
TC4B2421H CF/CM/CU24C 21.0 600 - 1000 800 23.2 16.2 14.00 11.75
TC4B2421H CF/CM/CU30A 14.5 600 - 1000 800 23.8 16.4 14.00 11.75
TC4B2421H CF/CM/CU30B 17.5 600 - 1000 800 23.8 16.4 14.00 11.75
TC4B2421H CF/CM/CU30C 21.0 600 - 1000 800 23.8 16.4 14.00 11.75
TC4B2421H CF/CM/CU30D 24.5 600 - 1000 800 23.8 16.4 14.00 11.75
TC4B2421H CF/CM/CU36B 17.5 600 - 1000 800 24.0 16.6 14.00 11.75
TC4B2421H CF/CM/CU36C 21.0 600 - 1000 800 24.0 16.6 14.00 11.75
TC4B2421H CF/CM/CU36D 24.5 600 - 1000 800 24.0 16.6 14.00 11.75
TC4B2421H CF/CM/CU42C 21.0 600 - 1000 800 24.0 16.6 14.25 11.75
TC4B2421H CF/CM/CU42D 24.5 600 - 1000 800 24.0 16.6 14.25 11.75
TC4B2421H CF/CM36A 14.5 600 - 1000 800 24.0 16.6 14.00 11.75
TC4B2421H CF42B 17.5 600 - 1000 800 24.0 16.6 14.25 11.75

For Notes See Page 10.

COOLING

NET MBH

SEER

1

EER

Johnson Controls Unitary Products 9

5005753-LTG-B-1215

COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) (Continued)

COIL

UNIT MODEL

MODEL WIDTH

CFM RANGE

(MIN.-MAX.)

RATED

CFM

TOTAL SENS.

TC4B3021H CF/CM/CU30B 17.5 800 - 1200 1000 29.4 21.0 14.00 11.75
TC4B3021H CF/CM/CU30C 21.0 800 - 1200 1000 29.8 21.2 14.00 11.75
TC4B3021H CF/CM/CU30D 24.5 800 - 1200 1000 29.8 21.2 14.00 11.75
TC4B3021H CF/CM/CU36B 17.5 800 - 1200 1000 30.0 21.2 14.00 11.75
TC4B3021H CF/CM/CU36C 21.0 800 - 1200 1000 30.0 21.2 14.00 11.75
TC4B3021H CF/CM/CU36D 24.5 800 - 1200 1000 30.0 21.2 14.00 11.75
TC4B3021H CF/CM/CU42C 21.0 800 - 1200 1000 30.0 21.4 14.00 11.75
TC4B3021H CF/CM/CU42D 24.5 800 - 1200 1000 30.0 21.4 14.00 11.75
TC4B3021H CF/CM36A 14.5 800 - 1200 900 29.8 20.2 14.00 11.75
TC4B3021H CF42B 17.5 800 - 1200 1000 30.0 21.4 14.00 11.75
TC4B3621H CF/CM/CU36B 17.5 1000 - 1400 1200 34.6 24.6 14.00 11.75
TC4B3621H CF/CM/CU36C 21.0 1000 - 1400 1200 34.8 24.8 14.00 11.75
TC4B3621H CF/CM/CU36D 24.5 1000 - 1400 1200 34.8 24.8 14.00 11.75
TC4B3621H CF/CM/CU42C 21.0 1000 - 1400 1200 34.8 25.0 14.00 11.75
TC4B3621H CF/CM/CU42D 24.5 1000 - 1400 1200 34.8 25.0 14.00 11.75
TC4B3621H CF/CM/CU48C 21.0 1000 - 1400 1200 35.2 24.8 14.00 11.75
TC4B3621H CF/CM/CU48D 24.5 1000 - 1400 1200 35.2 24.8 14.00 11.75
TC4B3621H CF42B 17.5 1000 - 1400 1200 34.8 25.0 14.00 11.75
TC4B4221H CF/CM/CU42C 21.0 1200 - 1600 1400 40.5 30.4 14.00 11.75
TC4B4221H CF/CM/CU42D 24.5 1200 - 1600 1400 41.0 31.0 14.00 11.75
TC4B4221H CF/CM/CU48C 21.0 1200 - 1600 1400 41.0 30.5 14.00 11.75
TC4B4221H CF/CM/CU48D 24.5 1200 - 1600 1400 41.0 30.5 14.00 11.75
TC4B4221H CF/CM/CU60C 21.0 1200 - 1600 1400 41.0 31.0 14.00 11.75
TC4B4221H CF/CM/CU60D 24.5 1200 - 1600 1400 41.0 31.0 14.00 11.75
TC4B4221H CF/CM64D 24.5 1200 - 1600 1400 42.0 31.0 14.00 11.75
TC4B4221H CF42B 17.5 1200 - 1600 1225 38.5 29.0 14.00 11.50
TC4B4821S CF/CM/CU48C 21.0 1400 - 1800 1600 47.5 34.2 14.00 11.75
TC4B4821S CF/CM/CU48D 24.5 1400 - 1800 1600 47.5 34.2 14.00 11.75
TC4B4821S CF/CM/CU60C 21.0 1400 - 1800 1600 48.0 36.0 14.00 12.25
TC4B4821S CF/CM/CU60D 24.5 1400 - 1800 1600 48.0 36.0 14.50 12.00
TC4B4821S CF/CM64D 24.5 1400 - 1800 1600 48.0 36.0 14.50 12.25
TC4B6021S CF/CM/CU60C 21.0 1535 - 1935 1735 56.0 41.0 14.00 11.75
TC4B6021S CF/CM/CU60D 24.5 1535 - 1935 1725 56.0 41.0 14.00 11.75
TC4B6021S CF/CM64D 24.5 1535 - 1935 1775 57.0 42.0 14.00 11.75

For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.

1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.

— = Not Applicable.
MP Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

COOLING

NET MBH

SEER

1

EER

10 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1

UNIT

MODEL

TC4B1821H TM8V060A12MP11 14.5 CF/CM/CU18A 525 18.0 12.1 14.75 12.25
TC4B1821H TM8V060A12MP11 14.5 CF/CM/CU24A 550 18.0 12.3 15.25 12.75
TC4B1821H TM8V060A12MP11 14.5 CF/CM/CU30A 550 18.0 12.3 15.50 12.75
TC4B1821H TM8V080B12MP11 17.5 CF/CM/CU18B 650 18.0 13.1 15.25 12.75
TC4B1821H TM8V080B12MP11 17.5 CF/CM/CU24B 675 18.0 13.2 15.75 12.75
TC4B1821H TM8V080B12MP11 17.5 CF/CM/CU30B 625 18.0 12.9 15.75 12.75
TC4B1821H TM8V080B12MP11 17.5 CF/CM/CU36B 675 18.0 13.1 16.00 13.25
TC4B1821H TM8X060A12MP11 14.5 CF/CM/CU18A 600 18.0 12.6 14.75 12.25
TC4B1821H TM8X060A12MP11 14.5 CF/CM/CU24A 600 18.0 12.6 15.25 12.50
TC4B1821H TM8X060A12MP11 14.5 CF/CM/CU30A 625 18.0 12.9 15.50 12.75
TC4B1821H TM8X060A12MP11 14.5 CF/CM36A 600 18.0 12.6 15.50 12.75
TC4B1821H TM8X080B12MP11 17.5 CF/CM/CU18B 600 18.0 12.7 15.00 12.50
TC4B1821H TM8X080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.6 15.00 12.50
TC4B1821H TM8X080B12MP11 17.5 CF/CM/CU30B 600 18.0 12.6 15.25 12.50
TC4B1821H TM8X080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.50 12.75
TC4B1821H TM8X080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TM8X080C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TM8X080C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TM8X080C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TM8X080C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TM8X100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TM8X100C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TM8X100C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TM8X100C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TM8X100C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TM8Y060A12MP11 14.5 CF/CM/CU18A 600 18.0 12.6 14.75 12.25
TC4B1821H TM8Y060A12MP11 14.5 CF/CM/CU24A 600 18.0 12.6 15.25 12.50
TC4B1821H TM8Y060A12MP11 14.5 CF/CM/CU30A 625 18.0 12.9 15.50 12.75
TC4B1821H TM8Y060A12MP11 14.5 CF/CM36A 600 18.0 12.6 15.50 12.75
TC4B1821H TM8Y080B12MP11 17.5 CF/CM/CU18B 600 18.0 12.7 15.00 12.50
TC4B1821H TM8Y080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.6 15.00 12.50
TC4B1821H TM8Y080B12MP11 17.5 CF/CM/CU30B 600 18.0 12.6 15.25 12.50
TC4B1821H TM8Y080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.50 12.75
TC4B1821H TM8Y080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TM8Y080C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TM8Y080C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TM8Y080C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TM8Y080C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TM8Y100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TM8Y100C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TM8Y100C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TM8Y100C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TM8Y100C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TM9E040A10MP11 14.5 CF/CM/CU18A 600 18.0 12.7 15.00 12.25
TC4B1821H TM9E040A10MP11 14.5 CF/CM/CU24A 575 18.0 12.4 15.00 12.25
TC4B1821H TM9E040A10MP11 14.5 CF/CM/CU30A 600 18.0 12.7 15.25 12.50
TC4B1821H TM9E040A10MP11 14.5 CF/CM36A 600 18.0 12.6 15.50 12.50
TC4B1821H TM9E060B12MP11 17.5 CF/CM/CU18B 600 18.0 12.6 14.75 12.25
TC4B1821H TM9E060B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 15.00 12.25

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 11

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B1821H TM9E060B12MP11 17.5 CF/CM/CU30B 600 18.0 12.7 15.25 12.50
TC4B1821H TM9E060B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.25 12.50
TC4B1821H TM9E080B12MP11 17.5 CF/CM/CU18B 600 18.0 12.6 14.75 12.25
TC4B1821H TM9E080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 15.00 12.25
TC4B1821H TM9E080B12MP11 17.5 CF/CM/CU30B 600 18.0 12.7 15.25 12.50
TC4B1821H TM9E080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.25 12.50
TC4B1821H TM9E080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.25 12.75
TC4B1821H TM9E080C16MP11 21.0 CF/CM/CU30C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E080C16MP11 21.0 CF/CM/CU30D 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E080C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E080C16MP11 21.0 CF/CM/CU36D 600 18.0 12.6 16.00 13.25
TC4B1821H TM9E100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.25 12.75
TC4B1821H TM9E100C16MP11 21.0 CF/CM/CU30C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E100C16MP11 21.0 CF/CM/CU30D 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E100C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9E100C16MP11 21.0 CF/CM/CU36D 600 18.0 12.6 16.00 13.25
TC4B1821H TM9E100C20MP11 21.0 CF/CM/CU24C 625 18.0 12.8 14.25 12.00
TC4B1821H TM9E100C20MP11 21.0 CF/CM/CU30C 625 18.0 12.8 14.50 12.00
TC4B1821H TM9E100C20MP11 21.0 CF/CM/CU30D 650 18.0 13.1 14.50 12.25
TC4B1821H TM9E100C20MP11 21.0 CF/CM/CU36C 625 18.0 12.7 14.50 12.25
TC4B1821H TM9E100C20MP11 21.0 CF/CM/CU36D 650 18.0 12.9 14.50 12.25
TC4B1821H TM9E120D20MP11 24.5 CF/CM/CU30D 600 18.0 12.6 14.50 12.00
TC4B1821H TM9E120D20MP11 24.5 CF/CM/CU36D 600 18.0 12.5 14.50 12.25
TC4B1821H TM9V040A10MP11 14.5 CF/CM/CU24A 675 18.0 13.1 14.50 12.25
TC4B1821H TM9V060B12MP11 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H TM9V060B12MP11 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H TM9V060B12MP11 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H TM9V060B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H TM9V080B12MP11 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H TM9V080B12MP11 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H TM9V080B12MP11 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H TM9V080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H TM9Y040A10MP11 14.5 CF/CM/CU18A 600 18.0 12.7 15.00 12.25
TC4B1821H TM9Y040A10MP11 14.5 CF/CM/CU24A 575 18.0 12.4 15.00 12.25
TC4B1821H TM9Y040A10MP11 14.5 CF/CM/CU30A 600 18.0 12.7 15.25 12.50
TC4B1821H TM9Y040A10MP11 14.5 CF/CM36A 600 18.0 12.6 15.50 12.50
TC4B1821H TM9Y060B12MP11 17.5 CF/CM/CU18B 600 18.0 12.6 14.75 12.25
TC4B1821H TM9Y060B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 15.00 12.25
TC4B1821H TM9Y060B12MP11 17.5 CF/CM/CU30B 600 18.0 12.7 15.25 12.50
TC4B1821H TM9Y060B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.25 12.50
TC4B1821H TM9Y080B12MP11 17.5 CF/CM/CU18B 600 18.0 12.6 14.75 12.25
TC4B1821H TM9Y080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 15.00 12.25
TC4B1821H TM9Y080B12MP11 17.5 CF/CM/CU30B 600 18.0 12.7 15.25 12.50
TC4B1821H TM9Y080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.25 12.50
TC4B1821H TM9Y080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.25 12.75
TC4B1821H TM9Y080C16MP11 21.0 CF/CM/CU30C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y080C16MP11 21.0 CF/CM/CU30D 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y080C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y080C16MP11 21.0 CF/CM/CU36D 600 18.0 12.6 16.00 13.25

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

12 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B1821H TM9Y100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.25 12.75
TC4B1821H TM9Y100C16MP11 21.0 CF/CM/CU30C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y100C16MP11 21.0 CF/CM/CU30D 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y100C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.75 12.75
TC4B1821H TM9Y100C16MP11 21.0 CF/CM/CU36D 600 18.0 12.6 16.00 13.25
TC4B1821H TM9Y100C20MP11 21.0 CF/CM/CU24C 625 18.0 12.8 14.25 12.00
TC4B1821H TM9Y100C20MP11 21.0 CF/CM/CU30C 625 18.0 12.8 14.50 12.00
TC4B1821H TM9Y100C20MP11 21.0 CF/CM/CU30D 650 18.0 13.1 14.50 12.25
TC4B1821H TM9Y100C20MP11 21.0 CF/CM/CU36C 625 18.0 12.7 14.50 12.25
TC4B1821H TM9Y100C20MP11 21.0 CF/CM/CU36D 650 18.0 12.9 14.50 12.25
TC4B1821H TM9Y120D20MP11 24.5 CF/CM/CU30D 600 18.0 12.6 14.50 12.00
TC4B1821H TM9Y120D20MP11 24.5 CF/CM/CU36D 600 18.0 12.5 14.50 12.25
TC4B1821H TMLV060A12MP11 14.5 CF/CM/CU18A 525 18.0 12.1 14.75 12.25
TC4B1821H TMLV060A12MP11 14.5 CF/CM/CU24A 550 18.0 12.3 15.25 12.75
TC4B1821H TMLV060A12MP11 14.5 CF/CM/CU30A 550 18.0 12.3 15.50 12.75
TC4B1821H TMLV080B12MP11 17.5 CF/CM/CU18B 650 18.0 13.1 15.25 12.75
TC4B1821H TMLV080B12MP11 17.5 CF/CM/CU24B 675 18.0 13.2 15.75 12.75
TC4B1821H TMLV080B12MP11 17.5 CF/CM/CU30B 625 18.0 12.9 15.75 12.75
TC4B1821H TMLV080B12MP11 17.5 CF/CM/CU36B 675 18.0 13.1 16.00 13.25
TC4B1821H TMLX060A12MP11 14.5 CF/CM/CU18A 600 18.0 12.6 14.75 12.25
TC4B1821H TMLX060A12MP11 14.5 CF/CM/CU24A 600 18.0 12.6 15.25 12.50
TC4B1821H TMLX060A12MP11 14.5 CF/CM/CU30A 625 18.0 12.9 15.50 12.75
TC4B1821H TMLX060A12MP11 14.5 CF/CM36A 600 18.0 12.6 15.50 12.75
TC4B1821H TMLX080B12MP11 17.5 CF/CM/CU18B 600 18.0 12.7 15.00 12.50
TC4B1821H TMLX080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.6 15.00 12.50
TC4B1821H TMLX080B12MP11 17.5 CF/CM/CU30B 600 18.0 12.6 15.25 12.50
TC4B1821H TMLX080B12MP11 17.5 CF/CM/CU36B 600 18.0 12.6 15.50 12.75
TC4B1821H TMLX080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TMLX080C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TMLX080C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TMLX080C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TMLX080C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TMLX100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.7 15.00 12.25
TC4B1821H TMLX100C16MP11 21.0 CF/CM/CU30C 600 18.0 12.7 15.25 12.75
TC4B1821H TMLX100C16MP11 21.0 CF/CM/CU30D 625 18.0 12.9 15.50 12.75
TC4B1821H TMLX100C16MP11 21.0 CF/CM/CU36C 600 18.0 12.6 15.25 12.50
TC4B1821H TMLX100C16MP11 21.0 CF/CM/CU36D 625 18.0 12.8 15.50 12.75
TC4B1821H TP9C060B12MP12 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H TP9C060B12MP12 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H TP9C060B12MP12 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H TP9C060B12MP12 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H TP9C080B12MP12 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H TP9C080B12MP12 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H TP9C080B12MP12 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H TP9C080B12MP12 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H TPLC060A12MP12 14.5 CF/CM/CU18A 525 18.0 12.1 14.75 12.25
TC4B1821H TPLC060A12MP12 14.5 CF/CM/CU24A 550 18.0 12.3 15.25 12.75
TC4B1821H TPLC060A12MP12 14.5 CF/CM/CU30A 550 18.0 12.3 15.50 12.75
TC4B1821H TPLC080B12MP12 17.5 CF/CM/CU18B 650 18.0 13.1 15.25 12.75
TC4B1821H TPLC080B12MP12 17.5 CF/CM/CU24B 675 18.0 13.2 15.75 12.75

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

Johnson Controls Unitary Products 13

COOLING

NET MBH

SEER EER

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B1821H TPLC080B12MP12 17.5 CF/CM/CU30B 625 18.0 12.9 15.75 12.75
TC4B1821H TPLC080B12MP12 17.5 CF/CM/CU36B 675 18.0 13.1 16.00 13.25
TC4B1821H LP9C060B12MP12 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H LP9C060B12MP12 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H LP9C060B12MP12 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H LP9C060B12MP12 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H LP9C080B12MP12 17.5 CF/CM/CU18B 625 18.0 12.8 15.25 12.75
TC4B1821H LP9C080B12MP12 17.5 CF/CM/CU24B 550 18.0 12.4 15.50 12.75
TC4B1821H LP9C080B12MP12 17.5 CF/CM/CU30B 650 18.0 13.0 15.50 12.75
TC4B1821H LP9C080B12MP12 17.5 CF/CM/CU36B 600 18.0 12.6 16.00 13.00
TC4B1821H LPLC060A12MP12 14.5 CF/CM/CU18A 525 18.0 12.1 14.75 12.25
TC4B1821H LPLC060A12MP12 14.5 CF/CM/CU24A 550 18.0 12.3 15.25 12.75
TC4B1821H LPLC060A12MP12 14.5 CF/CM/CU30A 550 18.0 12.3 15.50 12.75
TC4B1821H LPLC080B12MP12 17.5 CF/CM/CU18B 650 18.0 13.1 15.25 12.75
TC4B1821H LPLC080B12MP12 17.5 CF/CM/CU24B 675 18.0 13.2 15.75 12.75
TC4B1821H LPLC080B12MP12 17.5 CF/CM/CU30B 625 18.0 12.9 15.75 12.75
TC4B1821H LPLC080B12MP12 17.5 CF/CM/CU36B 675 18.0 13.1 16.00 13.25
TC4B2421H TM8V060A12MP11 14.5 CF/CM/CU24A 725 23.2 15.6 14.75 12.25
TC4B2421H TM8V060A12MP11 14.5 CF/CM/CU30A 725 23.4 16.0 15.25 12.50
TC4B2421H TM8V060A12MP11 14.5 CF/CM36A 700 23.6 15.8 15.25 12.50
TC4B2421H TM8V080B12MP11 17.5 CF/CM/CU24B 850 24.0 17.2 15.25 12.50
TC4B2421H TM8V080B12MP11 17.5 CF/CM/CU30B 800 24.0 16.6 15.25 12.50
TC4B2421H TM8V080B12MP11 17.5 CF/CM/CU36B 675 23.4 15.2 15.25 12.50
TC4B2421H TM8V080B12MP11 17.5 CF42B 850 24.0 17.0 15.75 12.75
TC4B2421H TM8X060A12MP11 14.5 CF/CM/CU24A 800 23.8 16.8 15.50 12.75
TC4B2421H TM8X060A12MP11 14.5 CF/CM/CU30A 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X060A12MP11 14.5 CF/CM36A 775 24.0 16.6 15.75 12.75
TC4B2421H TM8X080B12MP11 17.5 CF/CM/CU24B 800 23.8 16.8 15.50 12.75
TC4B2421H TM8X080B12MP11 17.5 CF/CM/CU30B 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080B12MP11 17.5 CF/CM/CU36B 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080B12MP11 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X080C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8X100C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

14 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8X100C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8X120C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y060A12MP11 14.5 CF/CM/CU24A 800 23.8 16.8 15.50 12.75
TC4B2421H TM8Y060A12MP11 14.5 CF/CM/CU30A 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y060A12MP11 14.5 CF/CM36A 775 24.0 16.6 15.75 12.75
TC4B2421H TM8Y080B12MP11 17.5 CF/CM/CU24B 800 23.8 16.8 15.50 12.75
TC4B2421H TM8Y080B12MP11 17.5 CF/CM/CU30B 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080B12MP11 17.5 CF/CM/CU36B 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080B12MP11 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y080C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TM8Y100C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y100C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TM8Y120C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TM9E040A10MP11 14.5 CF/CM/CU24A 750 23.2 16.0 14.50 12.00
TC4B2421H TM9E040A10MP11 14.5 CF/CM/CU30A 775 24.0 16.6 15.00 12.50
TC4B2421H TM9E040A10MP11 14.5 CF/CM36A 775 24.0 16.6 15.25 12.25
TC4B2421H TM9E060B12MP11 17.5 CF/CM/CU24B 750 23.4 16.2 15.50 12.75
TC4B2421H TM9E060B12MP11 17.5 CF/CM/CU30B 750 24.0 16.4 15.75 12.75
TC4B2421H TM9E060B12MP11 17.5 CF/CM/CU36B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E060B12MP11 17.5 CF42B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E080B12MP11 17.5 CF/CM/CU24B 750 23.4 16.2 15.50 12.75
TC4B2421H TM9E080B12MP11 17.5 CF/CM/CU30B 750 24.0 16.4 15.75 12.75

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 15

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B2421H TM9E080B12MP11 17.5 CF/CM/CU36B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E080B12MP11 17.5 CF42B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU24C 750 23.6 16.4 15.75 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU30C 750 24.0 16.6 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU30D 775 24.0 16.8 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU36C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU36D 775 24.0 16.6 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU42C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E080C16MP11 21.0 CF/CM/CU42D 775 24.0 16.4 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU24C 750 23.6 16.4 15.75 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU30C 750 24.0 16.6 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU30D 775 24.0 16.8 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU36C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU36D 775 24.0 16.6 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU42C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9E100C16MP11 21.0 CF/CM/CU42D 775 24.0 16.4 16.00 13.00
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU24C 825 23.8 17.0 15.25 12.25
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU30C 825 24.0 17.0 15.50 12.50
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU30D 825 24.0 17.0 15.50 12.50
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU36C 825 24.0 17.0 15.50 12.75
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.50 12.75
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.50 12.75
TC4B2421H TM9E100C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.75 12.75
TC4B2421H TM9E120D20MP11 24.5 CF/CM/CU30D 825 24.0 17.2 15.75 12.75
TC4B2421H TM9E120D20MP11 24.5 CF/CM/CU36D 800 24.0 16.8 15.75 12.75
TC4B2421H TM9E120D20MP11 24.5 CF/CM/CU42D 800 24.0 16.6 15.75 12.75
TC4B2421H TM9V040A10MP11 14.5 CF/CM/CU24A 675 22.4 14.4 14.25 11.50
TC4B2421H TM9V040A10MP11 14.5 CF/CM/CU30A 700 23.2 15.4 14.50 12.00
TC4B2421H TM9V060B12MP11 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H TM9V060B12MP11 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H TM9V060B12MP11 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H TM9V060B12MP11 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H TM9V080B12MP11 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H TM9V080B12MP11 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H TM9V080B12MP11 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H TM9V080B12MP11 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H TM9V080C16MP11 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H TM9V100C16MP11 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H TM9Y040A10MP11 14.5 CF/CM/CU24A 750 23.2 16.0 14.50 12.00
TC4B2421H TM9Y040A10MP11 14.5 CF/CM/CU30A 775 24.0 16.6 15.00 12.50
TC4B2421H TM9Y040A10MP11 14.5 CF/CM36A 775 24.0 16.6 15.25 12.25
TC4B2421H TM9Y060B12MP11 17.5 CF/CM/CU24B 750 23.4 16.2 15.50 12.75
TC4B2421H TM9Y060B12MP11 17.5 CF/CM/CU30B 750 24.0 16.4 15.75 12.75
TC4B2421H TM9Y060B12MP11 17.5 CF/CM/CU36B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y060B12MP11 17.5 CF42B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y080B12MP11 17.5 CF/CM/CU24B 750 23.4 16.2 15.50 12.75
TC4B2421H TM9Y080B12MP11 17.5 CF/CM/CU30B 750 24.0 16.4 15.75 12.75
TC4B2421H TM9Y080B12MP11 17.5 CF/CM/CU36B 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y080B12MP11 17.5 CF42B 750 24.0 16.4 16.00 13.00

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

16 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU24C 750 23.6 16.4 15.75 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU30C 750 24.0 16.6 16.00 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU30D 775 24.0 16.8 16.00 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU36C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU36D 775 24.0 16.6 16.00 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU42C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y080C16MP11 21.0 CF/CM/CU42D 775 24.0 16.4 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU24C 750 23.6 16.4 15.75 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU30C 750 24.0 16.6 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU30D 775 24.0 16.8 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU36C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU36D 775 24.0 16.6 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU42C 750 24.0 16.4 16.00 13.00
TC4B2421H TM9Y100C16MP11 21.0 CF/CM/CU42D 775 24.0 16.4 16.00 13.00
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU24C 825 23.8 17.0 15.25 12.25
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU30C 825 24.0 17.0 15.50 12.50
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU30D 825 24.0 17.0 15.50 12.50
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU36C 825 24.0 17.0 15.50 12.75
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.50 12.75
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.50 12.75
TC4B2421H TM9Y100C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.75 12.75
TC4B2421H TM9Y120D20MP11 24.5 CF/CM/CU30D 825 24.0 17.2 15.75 12.75
TC4B2421H TM9Y120D20MP11 24.5 CF/CM/CU36D 800 24.0 16.8 15.75 12.75
TC4B2421H TM9Y120D20MP11 24.5 CF/CM/CU42D 800 24.0 16.6 15.75 12.75
TC4B2421H TMLV060A12MP11 14.5 CF/CM/CU24A 725 23.2 15.6 14.75 12.25
TC4B2421H TMLV060A12MP11 14.5 CF/CM/CU30A 725 23.4 16.0 15.25 12.50
TC4B2421H TMLV060A12MP11 14.5 CF/CM36A 700 23.6 15.8 15.25 12.50
TC4B2421H TMLV080B12MP11 17.5 CF/CM/CU24B 850 24.0 17.2 15.25 12.50
TC4B2421H TMLV080B12MP11 17.5 CF/CM/CU30B 800 24.0 16.6 15.25 12.50
TC4B2421H TMLV080B12MP11 17.5 CF/CM/CU36B 675 23.4 15.2 15.25 12.50
TC4B2421H TMLV080B12MP11 17.5 CF42B 850 24.0 17.0 15.75 12.75
TC4B2421H TMLX060A12MP11 14.5 CF/CM/CU24A 800 23.8 16.8 15.50 12.75
TC4B2421H TMLX060A12MP11 14.5 CF/CM/CU30A 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX060A12MP11 14.5 CF/CM36A 775 24.0 16.6 15.75 12.75
TC4B2421H TMLX080B12MP11 17.5 CF/CM/CU24B 800 23.8 16.8 15.50 12.75
TC4B2421H TMLX080B12MP11 17.5 CF/CM/CU30B 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080B12MP11 17.5 CF/CM/CU36B 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080B12MP11 17.5 CF42B 800 24.0 16.6 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX080C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.0 15.75 12.75
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU30C 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU30D 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU36C 800 24.0 16.8 16.00 13.00

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 17

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU36D 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU42C 800 24.0 16.8 16.00 13.00
TC4B2421H TMLX100C16MP11 21.0 CF/CM/CU42D 800 24.0 16.6 16.00 13.00
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TMLX100C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU30C 800 24.0 16.6 15.00 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU30D 825 24.0 17.2 15.00 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU36C 825 24.0 16.8 15.25 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU36D 825 24.0 17.0 15.25 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU42C 825 24.0 16.8 15.25 12.25
TC4B2421H TMLX120C20MP11 21.0 CF/CM/CU42D 825 24.0 16.8 15.25 12.25
TC4B2421H TP9C060B12MP12 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H TP9C060B12MP12 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H TP9C060B12MP12 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H TP9C060B12MP12 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H TP9C080B12MP12 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H TP9C080B12MP12 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H TP9C080B12MP12 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H TP9C080B12MP12 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H TP9C080C16MP12 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H TP9C100C16MP12 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H TPLC060A12MP12 14.5 CF/CM/CU24A 725 23.2 15.6 14.75 12.25
TC4B2421H TPLC060A12MP12 14.5 CF/CM/CU30A 725 23.4 16.0 15.25 12.50
TC4B2421H TPLC060A12MP12 14.5 CF/CM36A 700 23.6 15.8 15.25 12.50
TC4B2421H TPLC080B12MP12 17.5 CF/CM/CU24B 850 24.0 17.2 15.25 12.50
TC4B2421H TPLC080B12MP12 17.5 CF/CM/CU30B 800 24.0 16.6 15.25 12.50
TC4B2421H TPLC080B12MP12 17.5 CF/CM/CU36B 675 23.4 15.2 15.25 12.50
TC4B2421H TPLC080B12MP12 17.5 CF42B 850 24.0 17.0 15.75 12.75
TC4B2421H LP9C060B12MP12 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H LP9C060B12MP12 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H LP9C060B12MP12 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H LP9C060B12MP12 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H LP9C080B12MP12 17.5 CF/CM/CU24B 800 24.0 17.0 16.00 13.00
TC4B2421H LP9C080B12MP12 17.5 CF/CM/CU30B 650 23.2 15.2 15.25 12.50
TC4B2421H LP9C080B12MP12 17.5 CF/CM/CU36B 725 24.0 16.2 15.75 12.75
TC4B2421H LP9C080B12MP12 17.5 CF42B 825 24.0 17.0 16.00 13.00
TC4B2421H LP9C080C16MP12 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H LP9C100C16MP12 21.0 CF/CM/CU36C 875 24.0 17.4 16.00 13.00
TC4B2421H LPLC060A12MP12 14.5 CF/CM/CU24A 725 23.2 15.6 14.75 12.25
TC4B2421H LPLC060A12MP12 14.5 CF/CM/CU30A 725 23.4 16.0 15.25 12.50
TC4B2421H LPLC060A12MP12 14.5 CF/CM36A 700 23.6 15.8 15.25 12.50
TC4B2421H LPLC080B12MP12 17.5 CF/CM/CU24B 850 24.0 17.2 15.25 12.50
TC4B2421H LPLC080B12MP12 17.5 CF/CM/CU30B 800 24.0 16.6 15.25 12.50
TC4B2421H LPLC080B12MP12 17.5 CF/CM/CU36B 675 23.4 15.2 15.25 12.50
TC4B2421H LPLC080B12MP12 17.5 CF42B 850 24.0 17.0 15.75 12.75

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

18 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B3021H TM8V060A12MP11 14.5 CF/CM/CU30A 975 30.0 21.4 14.25 11.75
TC4B3021H TM8V060A12MP11 14.5 CF/CM36A 875 29.8 20.2 14.50 12.00
TC4B3021H TM8V080B12MP11 17.5 CF/CM/CU36B 975 30.0 21.2 14.50 12.00
TC4B3021H TM8V080B12MP11 17.5 CF42B 850 29.4 20.0 14.75 12.25
TC4B3021H TM8V080C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.00 12.50
TC4B3021H TM8V080C16MP11 21.0 CF/CM/CU36C 1100 30.0 22.4 15.25 12.50
TC4B3021H TM8V080C16MP11 21.0 CF/CM/CU42C 925 30.0 20.8 15.25 12.50
TC4B3021H TM8V100C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.00 12.50
TC4B3021H TM8V100C16MP11 21.0 CF/CM/CU36C 1100 30.0 22.4 15.25 12.50
TC4B3021H TM8V100C16MP11 21.0 CF/CM/CU42C 925 30.0 20.8 15.25 12.50
TC4B3021H TM8V100C20MP11 21.0 CF/CM/CU36C 1100 30.0 22.2 15.00 12.50
TC4B3021H TM8V100C20MP11 21.0 CF/CM/CU42C 1100 30.0 22.2 15.00 12.50
TC4B3021H TM8V120C20MP11 21.0 CF/CM/CU36C 1100 30.0 22.2 15.00 12.50
TC4B3021H TM8V120C20MP11 21.0 CF/CM/CU42C 1100 30.0 22.2 15.00 12.50
TC4B3021H TM8X060A12MP11 14.5 CF/CM/CU30A 1000 30.0 21.6 14.75 12.00
TC4B3021H TM8X060A12MP11 14.5 CF/CM36A 975 30.0 21.2 14.75 12.25
TC4B3021H TM8X080B12MP11 17.5 CF/CM/CU30B 1000 30.0 21.6 14.75 12.00
TC4B3021H TM8X080B12MP11 17.5 CF/CM/CU36B 1000 30.0 21.4 15.00 12.50
TC4B3021H TM8X080B12MP11 17.5 CF42B 1000 30.0 21.2 14.75 12.25
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU30C 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU30D 1075 30.0 22.0 15.50 12.75
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU36C 1050 30.0 21.8 15.50 12.75
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU36D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU42C 1050 30.0 22.0 15.50 12.75
TC4B3021H TM8X080C16MP11 21.0 CF/CM/CU42D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU30C 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU30D 1075 30.0 22.0 15.50 12.75
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU36C 1050 30.0 21.8 15.50 12.75
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU36D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU42C 1050 30.0 22.0 15.50 12.75
TC4B3021H TM8X100C16MP11 21.0 CF/CM/CU42D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.25 12.50
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU30D 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU36C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU36D 1100 30.0 22.4 15.75 12.75
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU42C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X100C20MP11 21.0 CF/CM/CU42D 1100 30.0 22.2 15.75 12.75
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.25 12.50
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU30D 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU36C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU36D 1100 30.0 22.4 15.75 12.75
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU42C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8X120C20MP11 21.0 CF/CM/CU42D 1100 30.0 22.2 15.75 12.75
TC4B3021H TM8Y060A12MP11 14.5 CF/CM/CU30A 1000 30.0 21.6 14.75 12.00
TC4B3021H TM8Y060A12MP11 14.5 CF/CM36A 975 30.0 21.2 14.75 12.25
TC4B3021H TM8Y080B12MP11 17.5 CF/CM/CU30B 1000 30.0 21.6 14.75 12.00
TC4B3021H TM8Y080B12MP11 17.5 CF/CM/CU36B 1000 30.0 21.4 15.00 12.50
TC4B3021H TM8Y080B12MP11 17.5 CF42B 1000 30.0 21.2 14.75 12.25
TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU30C 1050 30.0 22.0 15.25 12.50

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 19

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU30D 1075 30.0 22.0 15.50 12.75
TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU36C 1050 30.0 21.8 15.50 12.75
TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU36D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU42C 1050 30.0 22.0 15.50 12.75
TC4B3021H TM8Y080C16MP11 21.0 CF/CM/CU42D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU30C 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU30D 1075 30.0 22.0 15.50 12.75
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU36C 1050 30.0 21.8 15.50 12.75
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU36D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU42C 1050 30.0 22.0 15.50 12.75
TC4B3021H TM8Y100C16MP11 21.0 CF/CM/CU42D 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.25 12.50
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU30D 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU36C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU36D 1100 30.0 22.4 15.75 12.75
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU42C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y100C20MP11 21.0 CF/CM/CU42D 1100 30.0 22.2 15.75 12.75
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.25 12.50
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU30D 1050 30.0 22.0 15.25 12.50
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU36C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU36D 1100 30.0 22.4 15.75 12.75
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU42C 1075 30.0 22.0 15.75 12.75
TC4B3021H TM8Y120C20MP11 21.0 CF/CM/CU42D 1100 30.0 22.2 15.75 12.75
TC4B3021H TM9E040A10MP11 14.5 CF/CM/CU30A 875 29.4 20.2 14.00 11.50
TC4B3021H TM9E040A10MP11 14.5 CF/CM36A 875 29.8 20.2 14.25 11.75
TC4B3021H TM9E060B12MP11 17.5 CF/CM/CU30B 900 29.8 20.8 14.75 12.25
TC4B3021H TM9E060B12MP11 17.5 CF/CM/CU36B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9E060B12MP11 17.5 CF42B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9E080B12MP11 17.5 CF/CM/CU30B 900 29.8 20.8 14.75 12.25
TC4B3021H TM9E080B12MP11 17.5 CF/CM/CU36B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9E080B12MP11 17.5 CF42B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9E080C16MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.00 12.50
TC4B3021H TM9E080C16MP11 21.0 CF/CM/CU30D 1050 30.0 21.8 15.00 12.50
TC4B3021H TM9E080C16MP11 21.0 CF/CM/CU36C 1025 30.0 21.6 15.00 12.50
TC4B3021H TM9E080C16MP11 21.0 CF/CM/CU42C 1000 30.0 21.2 15.25 12.50
TC4B3021H TM9E100C16MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.00 12.50
TC4B3021H TM9E100C16MP11 21.0 CF/CM/CU30D 1050 30.0 21.8 15.00 12.50
TC4B3021H TM9E100C16MP11 21.0 CF/CM/CU36C 1025 30.0 21.6 15.00 12.50
TC4B3021H TM9E100C16MP11 21.0 CF/CM/CU42C 1000 30.0 21.2 15.25 12.50
TC4B3021H TM9E100C20MP11 21.0 CF/CM/CU30C 975 30.0 21.6 15.50 12.75
TC4B3021H TM9E100C20MP11 21.0 CF/CM/CU36C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9E100C20MP11 21.0 CF/CM/CU42C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9E120D20MP11 24.5 CF/CM/CU30D 975 30.0 21.6 15.75 12.75
TC4B3021H TM9E120D20MP11 24.5 CF/CM/CU36D 975 30.0 21.2 16.00 13.00
TC4B3021H TM9E120D20MP11 24.5 CF/CM/CU42D 975 30.0 21.2 16.00 13.00
TC4B3021H TM9V060B12MP11 17.5 CF/CM/CU30B 825 29.6 19.6 14.75 12.25
TC4B3021H TM9V060B12MP11 17.5 CF/CM/CU36B 950 30.0 21.0 15.00 12.25
TC4B3021H TM9V060B12MP11 17.5 CF42B 925 30.0 20.8 15.25 12.75
TC4B3021H TM9V080B12MP11 17.5 CF/CM/CU30B 825 29.6 19.6 14.75 12.25

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

20 Johnson Controls Unitary Products

5005753-LTG-B-1215

COOLING CAPACITY - With High Efficiency Motor Furnaces1 (Continued)

UNIT

MODEL

TC4B3021H TM9V080B12MP11 17.5 CF/CM/CU36B 950 30.0 21.0 15.00 12.25
TC4B3021H TM9V080B12MP11 17.5 CF42B 925 30.0 20.8 15.25 12.75
TC4B3021H TM9V080C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.50 12.75
TC4B3021H TM9V080C16MP11 21.0 CF/CM/CU36C 975 30.0 21.2 15.50 12.75
TC4B3021H TM9V080C16MP11 21.0 CF/CM/CU42C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9V100C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.50 12.75
TC4B3021H TM9V100C16MP11 21.0 CF/CM/CU36C 975 30.0 21.2 15.50 12.75
TC4B3021H TM9V100C16MP11 21.0 CF/CM/CU42C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9V100C20MP11 21.0 CF/CM/CU30C 1075 30.0 21.8 15.00 12.50
TC4B3021H TM9V100C20MP11 21.0 CF/CM/CU36C 1075 30.0 22.0 15.25 12.25
TC4B3021H TM9V120D20MP11 24.5 CF/CM/CU36D 1125 30.0 22.4 16.00 13.00
TC4B3021H TM9V120D20MP11 24.5 CF/CM/CU42D 1125 30.0 22.4 15.50 12.75
TC4B3021H TM9Y040A10MP11 14.5 CF/CM/CU30A 875 29.4 20.2 14.00 11.50
TC4B3021H TM9Y040A10MP11 14.5 CF/CM36A 875 29.8 20.2 14.25 11.75
TC4B3021H TM9Y060B12MP11 17.5 CF/CM/CU30B 900 29.8 20.8 14.75 12.25
TC4B3021H TM9Y060B12MP11 17.5 CF/CM/CU36B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9Y060B12MP11 17.5 CF42B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9Y080B12MP11 17.5 CF/CM/CU30B 900 29.8 20.8 14.75 12.25
TC4B3021H TM9Y080B12MP11 17.5 CF/CM/CU36B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9Y080B12MP11 17.5 CF42B 900 30.0 20.6 15.00 12.50
TC4B3021H TM9Y080C16MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.00 12.50
TC4B3021H TM9Y080C16MP11 21.0 CF/CM/CU30D 1050 30.0 21.8 15.00 12.50
TC4B3021H TM9Y080C16MP11 21.0 CF/CM/CU36C 1025 30.0 21.6 15.00 12.50
TC4B3021H TM9Y080C16MP11 21.0 CF/CM/CU42C 1000 30.0 21.2 15.25 12.50
TC4B3021H TM9Y100C16MP11 21.0 CF/CM/CU30C 1075 30.0 22.0 15.00 12.50
TC4B3021H TM9Y100C16MP11 21.0 CF/CM/CU30D 1050 30.0 21.8 15.00 12.50
TC4B3021H TM9Y100C16MP11 21.0 CF/CM/CU36C 1025 30.0 21.6 15.00 12.50
TC4B3021H TM9Y100C16MP11 21.0 CF/CM/CU42C 1000 30.0 21.2 15.25 12.50
TC4B3021H TM9Y100C20MP11 21.0 CF/CM/CU30C 975 30.0 21.6 15.50 12.75
TC4B3021H TM9Y100C20MP11 21.0 CF/CM/CU36C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9Y100C20MP11 21.0 CF/CM/CU42C 975 30.0 21.2 15.75 12.75
TC4B3021H TM9Y120D20MP11 24.5 CF/CM/CU30D 975 30.0 21.6 15.75 12.75
TC4B3021H TM9Y120D20MP11 24.5 CF/CM/CU36D 975 30.0 21.2 16.00 13.00
TC4B3021H TM9Y120D20MP11 24.5 CF/CM/CU42D 975 30.0 21.2 16.00 13.00
TC4B3021H TMLV060A12MP11 14.5 CF/CM/CU30A 975 30.0 21.4 14.25 11.75
TC4B3021H TMLV060A12MP11 14.5 CF/CM36A 875 29.8 20.2 14.50 12.00
TC4B3021H TMLV080B12MP11 17.5 CF/CM/CU36B 975 30.0 21.2 14.50 12.00
TC4B3021H TMLV080B12MP11 17.5 CF42B 850 29.4 20.0 14.75 12.25
TC4B3021H TMLV080C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.00 12.50
TC4B3021H TMLV080C16MP11 21.0 CF/CM/CU36C 1100 30.0 22.4 15.25 12.50
TC4B3021H TMLV080C16MP11 21.0 CF/CM/CU42C 925 30.0 20.8 15.25 12.50
TC4B3021H TMLV100C16MP11 21.0 CF/CM/CU30C 950 30.0 21.0 15.00 12.50
TC4B3021H TMLV100C16MP11 21.0 CF/CM/CU36C 1100 30.0 22.4 15.25 12.50
TC4B3021H TMLV100C16MP11 21.0 CF/CM/CU42C 925 30.0 20.8 15.25 12.50
TC4B3021H TMLV100C20MP11 21.0 CF/CM/CU36C 1100 30.0 22.2 15.00 12.50
TC4B3021H TMLV100C20MP11 21.0 CF/CM/CU42C 1100 30.0 22.2 15.00 12.50
TC4B3021H TMLV120C20MP11 21.0 CF/CM/CU36C 1100 30.0 22.2 15.00 12.50
TC4B3021H TMLV120C20MP11 21.0 CF/CM/CU42C 1100 30.0 22.2 15.00 12.50
TC4B3021H TMLX060A12MP11 14.5 CF/CM/CU30A 1000 30.0 21.6 14.75 12.00

For notes see Page 40.

FURNACE

MODEL WIDTH

COIL

MODEL

2

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER EER

Johnson Controls Unitary Products 21