Luvelo LPMG700 Instructions Manual

Instructions

Luvelo Pro Meat Grinder

LPMG700

Congratulations

on the purchase of your new Luvelo Pro Meat Grinder

Safety Instructions

P/3

• Remove all packaging before using your Meat Grinder for the first time.

• Do not place Grinder near the edge of a bench or table during operation.

• Ensure the surface is level, free of liquids or other substances.

• Do not place your Meat Grinder on or near a hot stove or oven.

• Always use extreme care when handling the blade and cutting plates.

• Unplug from power outlet when not in use, before putting on or taking off
attachments, and before cleaning.

• Only use the pusher that is supplied with this Meat Grinder.

• Do not put your fingers or any utensil into the head.

• Do not put hot meat into the meat grinder.

• All attachments should be removed with care before cleaning.

• Only use the accessories provided and recommended by Luvelo.

• Do not overload the Meat Grinder.

• Do not place any parts of the Grinder in a dishwasher or microwave oven.

• Do not immerse the body of the Meat Grinder in water or other liquids.

• Never operate damaged appliance (incl. Mains cable).

• Operate appliance only through a professionally installed socket
supplying the correct voltage and do not use extension cables.

• Never remove main cable with wet hands, or lay cable on hot surface, or let
cable come into contact with oil.

• Unplug the appliance after each use, when the appliance is not in use and
before changing accessories or cleaning appliance.

• Do not try and perform any maintenance, other than cleaning. For any
maintenance issues please contact Luvelo Australia.

• Do not operate outdoors.

• This appliance is not intended for use by young children or infirm persons
without supervision.

• Use a fire blanket only to extinguish fires on appliance.

• The appliance is not designed for commercial or industrial use; it is for
household use only.

Please read all instructions before using the Luvelo Pro Meat Grinder.

Keep these instructions for future reference.

Know your Luvelo Pro Meat Grinder

P/4

Grinding Screw

Control Switch

Nozzle
Nozzle
Nozzle

m

small

Using your Luvelo Pro Meat Grinder

P/5

Using your Luvelo Pro Meat Grinder

Before using your Luvelo Pro Meat Grinder

Wash all attachments in warm soapy water using a mild detergent. Dry each
part thoroughly before use.Before you assemble the Meat Grinder ensure that
the power cord is unplugged.

NOTE: All attachments must be firmly in place before using the appliance.

IMPORTANT: Do not operate Meat Grinder for more than 10 minutes at

a time. Allow motor to cool for 10 minutes after 10 mintues of operation.

Reverse Mode
Use the reverse mode if there is a blockage. If the Meat Grinder is in
operation then press the ‘Stop & Reset’ button wait for 30 seconds then
press the ‘Reverse’ button to clear blocked food..
IMPORTANT: Do not press the reverse button while the ‘ON’ button is
pressed and the Meat Grinder is in operation.
Once the blockage has been cleared unplug the appliance and clean
out food from head of Meat Grinder.

Half Mode

Half mode is used when a slower grinding speed is required.
Recommended for sausage and kibbe making.

Basic assembly steps

Insert head into body of grinder Screw fasten button into place

Place grinding screw into head Place blade onto grinding screw

Place cutting blade into head Screw fixing ring on

Place hopper plate on head

1

2

3

4

5

6

7

P/6