Sivoia® QS
wiring and
programming
guide
Page 1
Sivoia® QS | Wiring and Programming Guide
Sivoia® QS Wiring and Programming Guide
Sivoia QS Drives are available for control of Draperies, Roller Shades, Venetian Blinds,
Sheer Blinds, and Tensioned Shades. Sivoia QS Shades, Blinds, and Draperies can be
controlled as part of a QS System, incorporating GRAFIK Eye
as a Window treaments only System, without lighting controls.
Sivoia QS Drives and Keypads are powered from a 24 V- power supply. All drives,
power supplies, keypads and other control devices are linked together. This link provides
24 V- to all components.
The Window treaments can also be equipped with a QS IR Eye receiver and operated
via an infrared Hand-Held Remote Control. These can be used in either a GRAFIK Eye
QS Integrated System or Sivoia QS Standalone System.
® QS lighting controls, or
Page 2
Sivoia® QS | Wiring and Programming Guide
Contents
Wiring
QS link power supply ..............................................4
Smart panel - one shade per output ...................................5
Smart panel - two shades per output ..................................6
Smart panel - three shades per output .................................7
GRAFIK Eye
Wire length chart .................................................9
Setting limits
From the drive ..................................................10
From a keypad ..................................................13
Verifyling communication
From the drive ..................................................11
From the smart panel .............................................11
Programming
Assigning window treaments to keypads ..............................12
Storing presets from a keypad ......................................14
Individual level adjust .............................................15
® QS integration .........................................8
Restoring defaults
Drive ..........................................................16
Keypad ........................................................17
Troubleshooting
Troubleshooting Chart ............................................18
Page 3
Sivoia® QS | Wiring and Programming Guide
1
Example: Powering one shade / drapery drive unit and one keypad
Example: Powering one shade / drapery drive unit and one keypad
(max of one shade / drapery drive unit per output of a power supply)
Example: Powering keypads
Example: Connecting to a GRAFIK Eye
® QS (Note: GRAFIK Eye QS powered from line voltage)
Example: Connecting to a GRAFIK Eye QS (Note: GRAFIK Eye QS powered from line voltage)
.
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Devices powered by
GRAFIK Eye QS
Devices powered
by supply
Devices powered by
Devices powered by supply
GRAFIK Eye QS
(Refer to GRAFIK Eye QS spec submittal
for maximum devices that can be powered by
GRAFIK Eye QS
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Type
Type
System Wiring Overview: QS Link Power Supply
(max of one shade / drapery drive unit per output of a power supply)
Open
Preset
Close
Wire Type A
LUTRON
Example: Powering keypads
Open
Preset
Close
LUTRON
Example: Connecting to a GRAFIK Eye
Open
Preset
Close
Wire Type B
Meeting
Videoconf
Afternoon
A/V Night
Off
Wire Type A
Open
Preset
Close
LUTRON
Open
Preset
...up to 8 keypads
Close
LUTRON
on link (B)
® QS (Note: GRAFIK Eye QS powered from line voltage)
Devices powered by
Open
Preset
Close
LUTRON
Open
Preset
Close
LUTRON
Open
GRAFIK Eye QS
Preset
Close
LUTRON
Devices powered
by supply
Wire Type A
Example: Connecting to a GRAFIK Eye QS (Note: GRAFIK Eye QS powered from line voltage)
Open
Preset
Close
Wire Type B
Meeting
Videoconf
Afternoon
A/V Night
Off
Open
Preset
Close
LUTRON
Open
Preset
Close
LUTRON
Open
Preset
Close
LUTRON
Open
Preset
Close
LUTRON
Wire Type A
Devices powered by
GRAFIK Eye QS
Open
Preset
Close
(Refer to GRAFIK Eye QS spec submittal
LUTRON
for maximum devices that can be powered by
GRAFIK Eye QS
Open
Devices powered by supply
Preset
Close
LUTRON
...up to 8 keypads
on link (B)
Wiring Type Key
Power and communication link (4 conductor)
A
Provides power and communication to QS shades or keypads
Communication link (3 conductor)
B
Communications used to connect power supplies to each other or to GRAFIK Eye QS
Wire Type A
Wire Type A
Page 4
Refer to Section 6 - QS Power Supply Wiring and Power Draw Unit Guidelines for wire gauge based on distance
Note: Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better
electrical, mechanical, and flammability ratings in accordance with local and national electric code.
Sivoia® QS | Wiring and Programming Guide
Example: Powering one shade / drapery drive unit and one keypad
(max of one shade / drapery drive unit per output of a power supply)
Example: Powering keypads
Example: Connecting to a GRAFIK Eye
® QS (Note: GRAFIK Eye QS powered from line voltage)
Example: Connecting to a GRAFIK Eye QS (Note: GRAFIK Eye QS powered from line voltage)
.
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Devices powered by
GRAFIK Eye QS
Devices powered
by supply
Devices powered by
Devices powered by supply
GRAFIK Eye QS
(Refer to GRAFIK Eye QS spec submittal
for maximum devices that can be powered by
GRAFIK Eye QS
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Type
Type
2
Sivoia QS System Wiring:
Smart Panel power supply, single shade per output
Sivoia QS
roller shade
Wire Type A
120 V~
60 Hz
To other
QS Controls
QSPS-P1-10-60
10 Output Smart
Panel power supply
Wire Type A
Sivoia QS
drapery track
Wire Type B
Sivoia QS
skylight shade
Wire Type A
120 V~
60 Hz
QSPS-P1-10-60
10 Output Smart Panel
power supply
seeTouch
Wiring Type Key
Power and communication link (4 conductor)
A
Provides power and communication to QS shades or keypads
Communication link (3 conductor)
B
® QS keypads
Communications used to connect power supplies to each other or to GRAFIK Eye QS
Refer to Section 6 - QS Power Supply Wiring and Power Draw Unit Guidelines for wire gauge based on distance
Note: Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better
electrical, mechanical, and flammability ratings in accordance with local and national electric code.
Sivoia® QS | Wiring and Programming Guide
Page 5
3
Example: Powering one shade / drapery drive unit and one keypad
(max of one shade / drapery drive unit per output of a power supply)
Example: Powering keypads
Example: Connecting to a GRAFIK Eye
® QS (Note: GRAFIK Eye QS powered from line voltage)
Example: Connecting to a GRAFIK Eye QS (Note: GRAFIK Eye QS powered from line voltage)
.
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Close
Preset
Open
Meeting
Videoconf
Afternoon
A/V Night
Off
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
LUTRON
Close
Open
Preset
...up to 8 keypads
on link (B)
Devices powered by
GRAFIK Eye QS
Devices powered
by supply
Devices powered by
Devices powered by supply
GRAFIK Eye QS
(Refer to GRAFIK Eye QS spec submittal
for maximum devices that can be powered by
GRAFIK Eye QS
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Wire Type B
Wire Type A
Wire Type A
Wire Type A
Type
Type
Sivoia QS System Wiring:
Smart Panel power supply, two shades per output
Wire Type A
120 V~
60 Hz
Sivoia QS roller 64TM or
roller 100
To other
QS Controls
TM*
Wire Type A
QSPS-P1-10-60
10 Output Smart
Panel power supply
Wire Type B
Wire Type A
120 V~
60 Hz
QSPS-P1-10-60
10 Output Smart Panel
power supply
seeTouch
® QS keypads
Wiring Type Key
Power and communication link (4 conductor)
A
Provides power and communication to QS shades or keypads
Communication link (3 conductor)
B
*Number of shades per output will
vary based on roller type and size of roller shade. Refer to Section 6 for
wiring guidelines
Communications used to connect power supplies to each other or to GRAFIK Eye QS
Refer to Section 6 - QS Power Supply Wiring and Power Draw Unit Guidelines for wire gauge based on distance
Note: Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent or better
electrical, mechanical, and flammability ratings in accordance with local and national electric code.
Page 6
Sivoia® QS | Wiring and Programming Guide
Loading...