Lutron Electronics RA-SBT-CHR, RB-SBT-CHR Programming Manual
A Step-by-Step Guide for Programming Timeclock Functions of
the Lutron RadioRA Chronos System Bridge and Timeclock
RA-SBT-CHR, RB-SBT-CHR
Timeclock Programming Guide For a
RadioRA
® ChronosTM System Bridge and
Timeclock
Setup Guide for the RadioRA® ChronosTM2
Table of Contents
Time Clock Programming
Astronomical Time Clock Programming
Setting the Chronos Date Time............................................................................ 3
Creating Time Clock Scenes ................................................................................ 5
Testing Time Clock Scenes .................................................................................. 9
Erasing Time Clock Scenes .................................................................................. 9
Creating Time Clock Events ................................................................................10
Viewing and Modifying Time Clock Events ........................................................12
Deleting a Time Clock Event ................................................................................12
Setting the Time Clock Home / Away Mode........................................................13
Setup Guide for the RadioRA® ChronosTM 3
Setting the ChronosTM Date and Time
Astronomical Time Clock Programming
Step 1 Go to Time / Date Settings
Step 2 Set the System Time
From Time / Date Settings, select Time.
Use and to change the selected field. Use
and to highlight the next / previous field.
To cancel the changes, press “Cancel” ( button).
To accept the changes, press “Done” ( button).
Time
09 : 14 AM
HH : MM
Cancel Done
Step 3 Set the System Date
From the Time / Date Settings Menu, select Date.
Use and to change the selected field. Use
and to highlight the next / previous field.
To cancel the changes, press “Cancel” ( button).
To accept the changes, press “Done” ( button).
Date
06
/ 17 / 2003
MM / DD / YYYY
Cancel Done
Step 4 Go to Location
From Time / Date Settings, select Location.
Set Location Method
Latitude and Longitude
Cancel Next
State and City
Set Location Method
Latitude and Longitude
Cancel Next
State and City
The location can be set by State and City or by
Latitude and Longitude. Use and to highlight
the selection. To exit without making changes, press
“Cancel” ( button). To proceed to the next step,
press “Next” ( button).
Step 5 Choose Set Location Method
Main Menu
Time Clock Setup
Time / Date Settings
Setup Guide for the RadioRA® ChronosTM4
Step 9 Set Time Format
From Time / Date Settings, select Time Format.
Use and to change between 12 and 24 hour
format.
To cancel the changes, press “Cancel” ( button).
To accept the changes, press “Done” ( button).
Time Format
12
Cancel Done
Hr.
Use and to select the correct value for the
highlighted field. Use and to highlight the
next / previous field. Press “Next” ( button) to
accept the selection.
Use and to highlight the correct state. Press
“Next” ( button) to accept the selection.
A list of cities for the state selected will be shown.
Use and to highlight the nearest city. Press
“Next' ( button) to accept the selection.
Select State
Rhode Island
Previous Next
Pennsylvania
South Carolina
South Dakota
Select City
Philadelphia
Previous Next
Coopersburg
Pittsburgh
State College
Astronomical Time Clock Programming
Step 6a Set Location by State and City
Step 6b Set Location by Latitude and
Longitude
Set Latitude and Longitude
Latitude
Previous Next
4
Longitude
0.5 N 075.4 W
Step 7 Set Time Zone
Use and to select correct Time Zone. Press
“Next” ( button) to accept the selection.
Press “Finish” ( button) to accept all of the loca-
tion settings.
Set Time Zone
Previous Finish
Eastern Time
GMT -04:00
GMT -03:00
GMT -02:00
Step 8
Set Daylight Savings
From Time / Date Settings, select Daylight Savings.
Use and to change the Daylight Savings setting.
To cancel the changes, press “Cancel” ( button).
To accept the changes, press “Done” ( button).
Daylight Savings
Automatically adjust clock
for Daylight Savings?
Yes
Cancel Done
Setup Guide for the RadioRA® ChronosTM 5
From Manage Scenes, select Set Scene Names.
Use and to highlight a scene to name. Press
“Select” ( button) to proceed to the next step.
Use the and keys, or a connected keyboard, to
change the selected character. Use and to
move to the previous / next character. Press
“Cancel” ( button) to cancel changes. Press
“Done” ( button) to accept changes.
Creating Time Clock Scenes
Up to 13 scenes can be programmed for activation by the Astronomical Time Clock.
Astronomical Time Clock Programming
Step 1 Go to Manage Scenes
Select Scene to Name
1. Scene 1
2. Scene 2
3. Scene 3
4. Scene 4
Back Select
Step 2 Set the Scene Names
Set Name
Name: _ _ _ _ _ _ _ _
Cancel Done
Mo r n i n
g
Step 3 Assign Zones
From Manage Scenes, select Assign Zones. The list
of Time Clock scenes is displayed:
Use and to highlight a scene. Press “Select”
( button) to enter Assignment Mode for the select-
ed scene. The following screen will be displayed when
Assignment Mode is initiated:
Once Assignment Mode has been initiated, the following screen will be displayed:
Select Scene to Assign
1. Morning
2. Scene 2
3. Scene 3
4. Scene 4
Back Select
Assign Zones
Entering Assignment
Mode...
Assign Zones
Turn on devices to be
assigned to Morning.
Continue
Copy Button
Main Menu
Time Clock Setup
Manage Scenes
Loading...