Lutron Electronics MO-2014 Operation Manual

10 Amperes max. test current

r

Y

f

f

A

f

Micro-Ohm Mete

Model : MO-2014

our purchase o
this Micro-Ohm
METER marks a
step forward for
you into the field o
precision
measurement.

lthough this
Micro-Ohm METER
is a complex and
delicate instrument,
its durable structure
will allow many
years of use i
proper operating
techniques are
developed. Please
read the following
instructions
carefully and always
keep this manual
within easy reach.

OPERATION MANUAL

TABLE OF CONTENTS

.

.

.

.

1. FEATURES...............................................................1

2. SPECIFICATIONS.....................................................1

2-1 General Specifications........................................

2-2 Electrical Specifications.......................................2

3. FRONT / REAR PANEL DESCRIPTION........................ 3

4. BASIC 4 WIRES MEASURING PRINCIPLE................... 4

5. PRECAUTION & PREPARATIONS FOR

MEASUREMENT.......................................................5

6. MEASURING PROCEDURES......................................

6-1 Buttons instructions ....................................... 5

6-2 Symbols & units of display.................................. 6

6-3 Resistance Measurement.................................... 6

7. HI / LO WARNING SETUP........................................

8. CALCULATE CABLE / WIRE LENGTH.........................

1

5

7

9

9. RS232 PC SERIAL INTERFACE.................................. 10

10. BATTERY REPLACEMENT........................................11

1. FEATURES

j

s

*

4 terminal devices for accurate measurement of very
low resistance.

*

Ideal for measuring the resistance of components
precisely.

*

Ideal for testing protective conductors, lightning
conductors and welded points.

*

Maximum test current is 10A ( 60000 uΩ range only ).

*

Have two working mode , Resistive and Inductive mode,
Normal is resistive mode.

*

Good / Fail set-function for input quality control.

*

Built-in in buzzer sound (GOOD STATUS) to assist the Q.C.

udgment.

*

Especial "CALCULATE" function to measure cable /
wire length.
Wide measuring range, 5 u Ω - 6K Ω , 6 ranges.

*
*

Large size and back-light LCM display, easy read-out.

*

LSI circuit provides high accuracy, reliability and
durability.

*

Built-in over input protection.

*

Durable bench type housing plastic case stand.

2. SPECIFICATIONS

2-1 General Specification

Test Range 60000 uΩ ( 10 A DC )
(Test Current) 600 m Ω ( 1 A DC )

6000 mΩ ( 100 mA DC )
60000 mΩ ( 10 mA DC )
600 Ω ( 1 mA DC )
6000 Ω ( 100 uA DC )

Warning Setup * Warning LCD Indicator

* Buzzer
Operating Temp. 0 to 50 ( 32 to 122 ).℃℉
Operating HumidityLess than 80 % R.H..
Power Supply DC 1.5 V , AA (UM-3)Battery X 8 PCs .

AC to DC 9V Power adapter .

1

Fuse protect * 10 A / 250 V
* Size : 6.3 X 32 mm dia..
Dimension 225 x 125 x 64 mm

( 8.86 x 4.92 x 2.52 inch)
Weight Approx. 790 g ( 1.74 LB ).

Standard 4 wire with 2 Kelvin clips........1 pair

Accessories Instruction Manual.................1 PC

AC/DC 9V power adapter........... 1 set

Optional * USB cable, USB-01.
Accessories * RS232 cable, UPCB-02.

* Data Acquisition software,

SW-U801-WIN., SW-E802.

* SD card data recorder, DL-9602SD

2-2 Electrical Specifications ( 23± 5 )℃

Range Resolution Test current Accuracy

60000 u Ω 1 u Ω 10 A
600 m Ω 10 u Ω 1 A
6000 mΩ 100 u Ω 100 mA ± ( 0.25 % + 25 d )
60000 mΩ 1000 u Ω 10 mA
600 Ω 10 mΩ 1 mA
6000 Ω 100 mΩ 100 uA ± ( 0.75 % + 3 d )

@ The above accuracy is based on the reading value.
@ Spec. tested under the environment RF Field Strength less
than 3 V/M & frequency less than the 30 MHz only.

Range Open Circuit Voltage
60000 u Ω Approx. DC 4.33 V
600 m Ω Approx. DC 4.33 V
6000 mΩ Approx. DC 4.33 V
60000 mΩ Approx. DC 4.33 V
600 Ω Approx. DC 4.33 V
6000 Ω Approx. DC 4.33 V

2