How it Works
LUTRON
Loading...
SSL 7A
User manual
5 pgs1.85 Mb0

LUTRON SSL 7A User manual

Application Note #637
Revision H
February 2021
NEMA SSL 7A Dimmer Compliance List Including Compliance With CA Title 24
NEMA (National Electrical Manufacturers Association) SSL 7A is a standard that provides basic requirements for phase-cut dimming of LED light sources. Please note that SSL 7A defines only basic dimming criteria. To ensure the lamp and dimmer are compatible with Lutron performance and quality standards, use the tool at www.lutron.com/compatibility or visit www.lutron.com/leds to find detailed report cards for LED lamps.
Effective January 1 2017, new residential construction and major renovation in California is required to meet CA Title24 2016 Building Energy Efficiency Standards Section 150.0(k)2A. This requirement states that all forward-phase-cut dimmers controlling interior LED lamps must comply with NEMA SSL 7A. This document contains the list of Lutron dimmers that are compliant with this Title 24 requirement.
This document is only applicable to phase control dimming and does not apply to sensors or other dimming technologies (e.g., 0 –10 V- or EcoSystem). If a product is not on the list, contact Customer Assistance at www.lutron.com/support or 1.844.LUTRON1.
Product Family Model Number Description Notes
Wallbox dimmers
RadioRA 2
GT-5NEM GRAFIK T phase-selectable dimmer Compliant when set to forward-phase mode.
MA-PRO Mastro C•L PRO Dimmer Compliant when set to forward-phase mode.
To help determine if the product is compliant with
MACL-153M Maestro C•L dimmer
RRD-6NA* Maestro phase-adaptive dimmer Compliant when set to forward-phase mode.
RRT-G5NEW GRAFIK T phase-selectable dimmer Compliant when set to forward-phase mode.
RRD-6CL RadioRA 2 C•L Dimmer Compliant with 2 or more LED lamps.
RRD-10ND Maestro neutral wire dimmer Compliant with up to 125 W LED load.
RRD-PRO Maestro LED+ dimmer
RRT-GH GRAFIK T hybrid keypad Compliant with neutral wire connected.
RRT-G25LW GRAFIK T dimmer Compliant with 2 or more LED lamps.
Title 24, refer to the MACL-153M Compliant vs. Non-Compliant Examples section on page 3.
Compliant when set to forward-phase mode. Neutral connected: 1 or more LED lamps. No neutral connection: 2 or more LED lamps.
*
Title 24 requires phase adaptive dimmers to be SSL 7A compliant only when operating in the forward-phase mode.
Continued on next page...
1 Customer Assistance — 1.844.LUTRON1
®
Application Note #637
Product Family Model Number Description Notes
HQRD-6NA* Maestro phase-adaptive dimmer Compliant when set to forward-phase mode.
Compliant with up to 100 W LED load when set to forward phase mode. Low-end trim must be set to 10%.
Compliant with up to 400 W LED load on Zone 1, and up to 200 W LED load on Zone 2, Zone 3, and Zone 4. Must be set to forward phase mode and Low-end trim set to 10%.
Compliant with up to 70 W LED load when set to forward phase mode. Low-end trim must be set to 10%.
Compliant with up to 70 W LED load when set to forward phase mode. Low-end trim must be set to 10%.
Compliant when set to forward-phase mode. Neutral connected: 1 or more LED lamps. No neutral connection: 2 or more LED lamps.
Compliant when set to forward-phase mode. Neutral connected: 1 or more LED lamps. No neutral connection: 2 or more LED lamps.
Compliant with up to 300 W LED load and when set to forward phase mode. Low-end trim must be set to 10%.
To help determine if your product is compliant with Title 24, refer to the HW-RPM-4U Compliant vs. Non-Compliant Examples section on page 4.
Compliant with up to 400 W LED load on Zone 1, and up to 200 W LED load on Zone 2, Zone 3, and Zone 4. Must be set to forward-phase mode and low-end trim set to 10%.
Complies with NEMA SSL 7A-2015 when configured to LED forward-phase with low-end trim set to 12% and high-end trim set to 90%.
HomeWorks
Wireless dimmers for use with Pico wireless controls and wireless sensors
Caséta Wireless
Panels
Vive
LQSE-4A-120-D* Phase-adaptive power module
LQSE-4A5-120-D* LED+ phase-adaptive power module
LQSE-4A1-D* Phase-adaptive power module
MQSE-4A1-D* myRoom phase-adaptive power module
HQRD-HN seeTouch hybrid keypad -
HQRT-G5NEW GRAFIK T phase-selectable dimmer Compliant when set to forward-phase mode.
HQRD-6ND Maestro neutral wire dimmer Compliant with up to 125 W LEDload.
HQRD-6CL HomeWorks QS RF C•L Dimmer Compliant with 2 or more LED lamps.
HQRD-10ND Maestro neutral wire dimmer Compliant with up to 125 W LEDload.
HQRA-PRO Maestro LED+ dimmer
HQRD-PRO Maestro LED+ dimmer
QSGRJ-6P GRAFIK Eye control unit Compliant with 3 or more LEDlamps.
HQRT-G25LW GRAFIK T dimmer Compliant with 2 or more LEDlamps.
HQRT-GH GRAFIK T hybrid keypad Compliant with neutral wire connected.
HQR-3LD Tabletop lamp dimmer -
HQR-3PD Plug-in lamp dimmer -
HW-RPM-4A* Phase-adaptive module
HW-RPM-4U Forward-phase module
GTJ-150 GRAFIK T wireless dimmer Compliant with 2 or more LED lamps.
GTJ-250M GRAFIK T wireless dimmer Compliant with 2 or more LED lamps.
GTJ-5NEM GRAFIK T wireless phase selectable Compliant when set to forward-phase mode.
MRF2-3LD Maestro Wireless tabletop lamp dimmer -
MRF2-3PD Maestro Wireless plug-in lamp dimmer -
MRF2-6ND Maestro Wireless neutral wire dimmer Compliant with up to 125 W LEDload.
PD-6WCL Caseta C•L dimmer -
PD-10NXD Caseta C•L PRO dimmer -
PD-5NE Caseta ELV+ dimmer Compliant when set to forward-phase mode.
PD-3PCL Caseta plug-in dimmer -
RET-GPDIMMER Retrofit GP card -
PHPM-PA* Phase-adaptive power booster -
PHPM-WBX* Phase-adaptive power booster -
QSN-4A5-S*
RMJS-PNE-DV* RMJS-PNE-DV-EM*
Energi Savr Node LED+ phase-adaptive fixture controller
Vive PowPak-phase select dimming module
Title 24 requires phase adaptive dimmers to be SSL 7A compliant only when operating in the forward-phase mode.
*
2 www.lutron.com/support
Loading...
+ 3 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use