How it Works
Lutron
Loading...
QSWS2-1BI
User Manual
27 pgs4.34 Mb0

Lutron QSWS2-1BN, QSWS2-1BI User Manual

Download
®
1
Color and Engraving Codes
QSWS2-1BN-___-___ QSWS2-1BI-___-___ 1-Button Wallstation
Description
• Offers toggle functionality for any combination of zone(s) in the system.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
Wallstations
369489g 1 05.19.20
LED
QSWS2-1BN-WH (Non-insert version)
QSWS2-1BI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
2
Color and Engraving Codes (continued)
QSWS2-2BN-___-___ QSWS2-2BI-___-___ 2-Button Wallstation
Wallstations
369489g 2 05.19.20
LEDs
Description
• Often used in entryways to select Scene 1 and Off.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
1
Off
Engraving
QSWS2-2BN-WH-EGN (Non-insert version)
QSWS2-2BI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
3
Color and Engraving Codes (continued)
QSWS2-3BN-___-___ QSWS2-3BI-___-___ 3-Button Wallstation
Wallstations
369489g 3 05.19.20
LEDs
Description
• Often used to select scenes.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons are pressed.
1
2
3
Engraving
QSWS2-3BN-WH-EGN (Non-insert version)
QSWS2-3BI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
4
Color and Engraving Codes (continued)
QSWS2-5BN-___-___ QSWS2-5BI-___-___ 5-Button Wallstation
Description
• Often used to select between 4 scenes and Off.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons are pressed.
Wallstations
369489g 4 05.19.20
LEDs
QSWS2-5BN-WH (Non-insert version)
1
2
3
4
Off
QSWS2-5BI-WH-EGN (Insert version)
Engraving
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
5
Color and Engraving Codes (continued)
QSWS2-7BN-___-___ QSWS2-7BI-___-___ 7-Button Wallstation
Description
• Often used to select scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
Wallstations
369489g 5 05.19.20
LEDs
1
2
3
4
5
6
7
Engraving
QSWS2-7BN-WH-EGN (Non-insert version)
QSWS2-7BI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
6
Color and Engraving Codes (continued)
QSWS2-2BRLN-___-___ QSWS2-2BRLI-___-___ 2-Button Wallstation with Raise / Lower
Wallstations
369489g 6 05.19.20
LED
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
1
Off
QSWS2-2BRLN-WH-EGN (Non-insert version)
Open
Close
Scene Selection Buttons
Engraving
Master Rais e / Lower
QSWS2-2BRLI-WH-E01 (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
7
Color and Engraving Codes (continued)
QSWS2-3BRLN-___-___ QSWS2-3BRLI-___-___ 3-Button Wallstation with Raise / Lower
Wallstations
369489g 7 05.19.20
LED
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
– One (1) programmable preset button.
Open
Preset
Close
Engraving
Master Rais e / Lower
QSWS2-3BRLN-WH-E01 (Non-insert version)
1
2
3
QSWS2-3BRLI-WH-EGN (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
8
Color and Engraving Codes (continued)
QSWS2-5BRLN-___-___ QSWS2-5BRLI-___-___ 5-Button Wallstation with Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
– Three (3) programmable preset buttons.
1
2
3
4
Off
QSWS2-5BRLN-WH-EGN (Non-insert version)
Open
Preset 1
Preset 2
Preset 3
Close
Wallstations
369489g 8 05.19.20
LED
Scene Selection Buttons
Engraving
Master Rais e / Lower
QSWS2-5BRLI-WH-E01 (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
9
Color and Engraving Codes (continued)
QSWS2-2BRLIRN-___-___ QSWS2-2BRLIRI-___-___ 2-Button Wallstation with Infrared (IR) Receiver and Raise / Lower
Wallstations
369489g 9 05.19.20
LED
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
1
Off
QSWS2-2BRLIRN-WH-EGN (Non-insert version)
Scene Selection Buttons
Engraving
IR Window
Master Rais e / Lower
QSWS2-2BRLIRI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
®
10
Color and Engraving Codes (continued)
QSWS2-3BRLIRN-___-___ QSWS2-3BRLIRI-___-___ 3-Button Wallstation with Infrared Receiver and Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
– One (1) programmable preset button.
Wallstations
369489g 10 05.19.20
LED
1
2
3
Engraving
IR Window
Master Rais e / Lower
QSWS2-3BRLIRN-WH-EGN (Non-insert version)
Open
Preset
Close
Job Name:
Job Number:
QSWS2-3BRLIRI-WH-E01 (Insert version)
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
11
Color and Engraving Codes (continued)
QSWS2-5BRLIRN-___-___ QSWS2-5BRLIRI-___-___ 5-Button Wallstation with Infrared Receiver and Raise / Lower
Description
• Often used to select and adjust scenes.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master Raise / Lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected scene or toggled group.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion.
– Three (3) programmable preset buttons.
1
2
3
4
Off
QSWS2-5BRLIRN-WH-EGN (Non-insert version)
Wallstations
369489g 11 05.19.20
LED
Scene Selection Buttons
Engraving
IR Window
Master Rais e / Lower
Job Name:
Job Number:
QSWS2-5BRLIRI-WH (Insert version)
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
12
Color and Engraving Codes (continued)
QSWS2-1RLDN-___-___ QSWS2-1RLDI-___-___ Dual Wallstation with 3-Button and 2-Button with Raise / Lower
Description
• Used to control one or more lighting or window treatment groups simultaneously.
• Functions as two independently programmable controllers: a 3-button (top keypad group) and a 2-button (bottom keypad group). Can control two lighting zones, two shade zones, or one of each.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Used to control multiple groups of shades
independently from a single-gang keypad (e.g., a window with a sheer shade and a blackout shade).
– Often used to select three different groups of shades
using Open, Close, and Raise / Lower. – Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Group 1
Group 2
Group 3
Open
Close
QSWS2-1RLDN-WH-E01 (Non-insert version)
1
2
3
Open
Close
QSWS2-1RLDI-WH-EGN (Insert version)
Wallstations
369489g 12 05.19.20
LED
Engraving
Raise / Lower
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
13
Color and Engraving Codes (continued)
QSWS2-2RLDN-___-___ QSWS2-2RLDI-___-___ Dual 2-Button Wallstation with Raise / Lower
Description
• Used to control one or more lighting or window treatment groups simultaneously.
• Functions as two independently programmable 2-button controllers. Can control two lighting zones, two shade zones, or one of each.
• Receives up to two contact closure inputs through a connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• The LEDs next to each button are used during programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving):
– Can be used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade). – Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion.
Open
Close
Open
Close
QSWS2-2RLDN-WH-E01 (Non-insert version)
1
2
Open
Close
Wallstations
369489g 13 05.19.20
LED
Engraving
Raise / Lower
Raise / Lower
Job Name:
Job Number:
QSWS2-2RLDI-WH-EGN (Insert version)
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
14
Color and Engraving Codes (continued)
QSWS2-3BDI-___-___ QSWS2-3BDN-___-___ Dual 3-Button Wallstation
Description
• Used to control one or more lighting or window
treatment groups simultaneously.
• Functions as two independently programmable
3-button controllers. Can control two lighting zones, two shade zones, or one of each.
• Receives up to two contact closure inputs through a
connector on the back of the wallstation.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it
easy to find and operate the wallstation in low-light conditions.
• Optional button engraving is angled up to the eye for
easy reading.
• The LEDs next to each button are used during
programming and provide feedback when the buttons are pressed.
• Shade control features (E01 engraving): – Can be used to control multiple groups of shades
independently from a single-gang keypad (e.g., a
window with a sheer shade and a blackout shade). – Can control Sivoia QS window treatments. – Pressing the Open (or Close) button once will cause
the window treatments to move to their fully open
(or closed) position. Tap any button (regardless of
function) to stop a shade that is in motion. – One (1) programmable preset button per
3-button column.
Wallstations
369489g 14 05.19.20
LED
1
2
3
Open
Preset
Close
Engraving
QSWS2-3BDN-WH-EGN (Non-insert version)
Open
Preset
Close
Open
Preset
Close
Job Name:
Job Number:
QSWS2-3BDI-WH-E01 (Insert version)
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
15
Specifications
Power Input (Control Link Terminal 2)
SELV / PELV / NEC
Key Design Features
• Field-changeable button and faceplate assemblies allow easy
customization.
• Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge
without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multiganging.
• Can be ganged to share a common faceplate with Nova T* and Vareo
dimmers. To order new wallplates for multi-ganging, specify “R3” openings in a Nova T* multi-gang FB (fins broken) series model number.
• Use Faceplate Replacement Kits to change color, button configuration, or
engraving, or to convert between non-insert and insert configurations.
System Communications and Capacity
• SELV / PELV / NEC
the QS Link.
• A QS system can have up to 100 devices and 100 zones; seeTouch QS
wallstations each count as one device and zero zones on the QS Link.
• A seeTouch QS wallstation consumes one power draw unit (PDU) on the
QS link. For complete information, see Power Draw Units on the QS Link (P/N 369405) at www.lutron.com
Terminals
Accept up to two 18 AWG (1.0 mm
® Class 2. Operating voltage: 24–36 V- 30 mA
® Class 2 wiring connects wallstations to other devices on
2
).
Wallstations
369489g 15 05.19.20
Dimensions Front View
22 in
(70 mm)
Side View
18 in
(30.2 mm)
4# in
(116 mm)
Environment
32 °F to 104 °F (0 °C to 40 °C). Relative humidity less than 90% non-condensing.
Compatibility
seeTouch QS keypads are compatible with GRAFIK Eye QS, Sivoia QS, Energi Savr Node, and Quantum systems.
Mounting
Typical backbox dimensions:
3.75 in (95 mm) high,
2.1875 in (55 mm) wide,
2.75 in (70 mm) deep.
SPECIFICATION SUBMITTAL Page
Job Name:
Model Numbers:
5/16 in (8 mm)
Back View
4
3
2
1
C
B
A
13/16 in
(20.6 mm)
QS Link Connector
Sensor / Contact Closure Input Connector
Job Number:
®
16
Available Control Types
seeTouch wallstations are available in three types:
Wallstations
369489g 16 05.19.20
Lights Only
1
2
3
QSWS2-3BRLI-WH-EGN (Insert version)
Lights and Shades Shades Only
1
2
3
Open
Close
QSWS2-1RLDI-WH-EGN (Insert version)
QSWS2-5BRLI-WH-E01 (Insert version)
Open
Preset 1
Preset 2
Preset 3
Close
Lights Only
• Controls only lights.
• Has a programmable column type (choose from the list on the following pages).
• Engraving options: General (EGN) and Non-Standard (NST).
Lights and Shades
• Top column controls only lights and has a programmable column type
(choose from the list on the following pages).
• Bottom column controls only shades and has a programmable column type
(choose from the list on the following pages).
• Engraving options: General (EGN) and Non-Standard (NST).
Shades Only
• Controls only shades.
• Models with preset buttons have programmable preset levels.
• Engraving options: Standard (E01), Secondary (E02), and Non-Standard (NST).
SPECIFICATION SUBMITTAL Page
Job Name:
Model Numbers:
Job Number:
®
17
Wallstations
369489g 17 05.19.20
Available Column Types
Scene (with Off)
• Controls pre-programmed scenes on one or more scene controllers (such as a GRAFIK Eye QS,
or an area on an Energi Savr Node).
• Buttons within a column control the same scene controller(s) (different buttons within a column cannot control
different scene controllers).
• The scene recalled by the first button in a column is programmable, subsequent buttons recall the next numerical
scene, and the last button always recalls Scene Off.
• A 1-button scene wallstation will always toggle between the assigned scene and Scene Off.
Scene (without OFF)
• Identical function to scene with Off, except the last button in a column recalls the next consecutive scene, not
Scene Off.
Zone Toggle
• Buttons toggle a zone or group of zones between programmable preset values and Off (where all zones are Off).
• Each zone can be programmed to a different value.
• Each button can be individually programmed to a different zone or group of zones.
Partition
• Allows the user to assign individual buttons of a column to different scene controllers (areas).
• One button press (button LED lights) indicates an open partition within the space so that devices programmed to
that button talk to each other in both directions.
• A second button press (button LED goes off) indicates a closed partition within the space so that devices
programmed to that button function independently.
2B Partition (2-button wallstation only)
• Identical function to partition, except that there are two buttons.
• A top button press indicates an open partition; a bottom button press indicates a closed partition.
2B Fine Tune (2-button wallstation only)
• Buttons function as raise and lower buttons for assigned zones.
• A button tap will raise / lower the level of assigned zones by 1 percent.
• Pressing and holding the buttons smoothly raises to high end or smoothly lowers to low end.
2B Sequence (2-button wallstation only)
• All assigned scene controllers continuously cycle through either Scenes 1-4 or Scenes 5-16 using the
programmed fade times for each scene.
• Useful for spaces that desire dynamic lighting, such as decorative lighting or displays in retail stores.
Job Name:
Job Number:
(continued on next page)
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
18
Wallstations
369489g 18 05.19.20
Available Column Types (continued)
2B Panic (2-button wallstation only)
• Button press causes all assigned scene controllers go to Scene 16.
• Temporarily disables all button presses and ignores scene or zone level changes.
2B Timeclock (2-button wallstation only)
• Allows the user to enable or disable the timeclock on a GRAFIK Eye QS.
• A top button press enables the timeclock; a bottom button press disables the timeclock.
Shade
• Wallstation must have more than 1 button.
• Raise / Lower buttons are recommended for programming.
• The top button becomes the Open button; the bottom button becomes the Close button for associated Lutron
Sivoia QS shades or third-party AC shades.
• For keypads with more than two buttons, the middle buttons are programmable preset buttons.
Shade Group
• Available only on a multi-column keypad where another column is a shade column.
• Allows the shade column to operate as multiple independent keypads (one per group).
• The shade group column selects which independent keypad is currently active (indicated by the group button
whose LED is lit).
Note: Column types can be changed using the GRAFIK Eye QS programming menu (e.g., control programmed as lights only can be changed to shades only).
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
19
How to Build a Standard seeTouch QS Model Number
Wallstations
369489g 19 05.19.20
QSWS2- -WH-
Prefix
NOTE: Standard engraving text does not automatically assign or re-assign system programming to the QS keypad buttons. Project-specific customer input and programming by a Lutron service team member is still required to achieve a desired sequence of operation / system functionality per control.
* Engraving options may vary based on Button Configuration selected.
Refer to next pages for available options (see Standard seeTouch QS Wallstation Button Functions Summary).
Button
Configuration
(see next page)
Insert
Style
N: Non-insert I: Insert
White Matte Finish
Engraving
Code*
Button Configurations
2B 3B 5B 7B
Generic
Engraving Code: G for all configurations
On Off
1 2 Off
1 2 3 4 Off
Shades
Engraving Code: S for all configurations
Open Close
Open Preset 1 Close
Open Preset 1 Preset 2 Preset 3 Close
1 2 3 4 5 6 Off
Open Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Close
Job Name:
Hotel Room
Engraving Code: H for all configurations
DND MUR
High Low Off
High Welcome Medium Foyer Low Living Nightlight Bed Off Bath
Bedside Off
Auditorium
Engraving Code: A for all configurations
All On All Off
All On Present All Off
All On All On Present Present Lecture Lecture Exam Exam All Off Perform
Cleaning All Off
SPECIFICATION SUBMITTAL Page
Model Numbers:
Job Number:
®
20
Standard seeTouch QS Wallstation Button Functions Summary (WH Only)
Wallstations
369489g 20 05.19.20
Button Configurations
2B 3B 5B 7B
Lobby
Engraving Codes
A L L L
All On All Off
All On Event All Off
All On Morning Afternoon Evening All Off
Restaurant
Engraving Codes
A R R R
All On All Off
All On
After Hours
All Off
All On Breakfast Lunch Dinner All Off
All On Morning Afternoon Evening
After Hours
Event All Off
All On Breakfast Lunch Dinner
After Hours
Cleaning All Off
Button Configurations
2B 3B 5B 7B
Retail
Engraving Codes
A R L T
All On All Off
All On
After Hours
All Off
All On All On Morning Morning Afternoon Afternoon Evening Evening All Off
Classroom
Engraving Codes
A A A C
All On All Off
All On Present All Off
All On All On Present Present Lecture Lecture Exam Exam All Off Movie
After Hours
Cleaning All Off
Cleaning All Off
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
21
Wallstations
369489g 21 05.19.20
Standard seeTouch QS Wallstation Button Functions Summary (WH only) (continued)
Button Configurations
1B 2B 3B 5B 7B
Meeting Room
Engraving Codes
A M M M
N/A
All On All Off
All On Meeting All Off
All On Meeting A / V Cleaning All Off
Ballroom
Engraving Codes
A L B B
N/A
All On All Off
All On Event 1 All Off
All On All On Event 1 Event 1 Event 2 Event 2 Event 3 Event 3 All Off Event 4
Private Office
Engraving Codes
A P P
N/A N/A
All On All Off
On Dim Off
On Dim Zone 1 Zone 2 Off
Zone Toggle
Engraving Code: Z for all configurations
On/Off
Zone 1 Zone 2
Zone 1 Zone 2 Zone 3
Zone 1 Zone 1 Zone 2 Zone 2 Zone 3 Zone 3 Zone 4 Zone 4 Zone 5 Zone 5
All On Meeting A / V Pendant Perimeter Event All Off
Event 5 All Off
Zone 6 Zone 7
Button Configurations
1RLD 2RLD 3BD
Shades – Dual Zone
Engraving Code: D for all configurations
N/A N/A
Open Close
Open Close
Lights and Shades A
Engraving Code: U for all configurations
On Preset Off
Open Close
On Off
Open Close
On Preset Off
Open Preset Close
Lights Dual Zone
Engraving Code: K for all configurations
N/A
On Off
On Off
On Preset Off
On Preset
Off
Lights and Shades B
Engraving Code: Q for all configurations
N/A N/A
On Preset Off
Open Stop Close
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
22
How to Build a Custom seeTouch QS Model Number
QSWS2- - -
Wallstations
369489g 22 05.19.20
Prefix
Button
Configuration
(see next
page)
N: Non-insert I: Insert
Insert
Style
Color/ Finish
Engraving
Code
Color/Finish Codes
Architectural Matte Finishes
White WH Ivory IV Beige BE Gray GR Brown BR Black BL Almond AL Light Almond LA Taupe TP
Architectural Metal Finishes
With black plastic buttons (standard). Bright Brass BB Bright Chrome BC Bright Nickel BN Satin Brass SB Satin Chrome SC Satin Nickel SN Antique Brass QB Antique Bronze QZ
Anodized Aluminum Finishes
With black plastic buttons (standard). Clear CLA Black BLA Brass BRA
If no color is specified, wallstations will ship with white (WH) finish.
Satin Colors Matte Finishes
Available with Insert (I) style controls only. Snow SW Midnight MN Taupe TP Biscuit BI Eggshell ES Palladium PD* Hot HT* Merlot MR* P l u m P L* Sienna SI* Terracotta TC* Bluestone BG* Green briar GB* Goldstone QS* Mocha stone MS* Stone ST* Desert Stone DS* Limestone LS*
* Note: Some Satin Colors units ship
with different color buttons. For more information, please visit the seeTouch website at
www.lutron.com/seetouch
* For the latest color offerings please
see our website: http://www.lutron.com/satincolors
Engraving Codes
Omit: Unengraved EGN: General Engraving
For “Lights only” and “Lights and Shades” controls
E01: Standard Engraving
For “Shades only” controls E02: Secondary engraving for “Shades only” controls NST: Non-Standard Text Engraving
Please visit the GRAFIK Eye QS website at
www.lutron.com/grafikeyeqs for custom
engraving forms
Engraving Notes
• The engraving option (model number and suffix) is related to the control type, as shown above in the "How to Build a Standard seeTouch QS Model Number" section.
• Four engraving options are available:
1. EGN: General engraving for ‘Lights Only’ and ‘Lights and Shades’ controls
2. E01: Standard engraving for ‘Shades Only’
controls and ‘Lights and Shades’ for model QSWE-10BRLI-WH-E01 only
3. E02: Secondary engraving for ‘Shades Only’
controls
4. NST: Non-standard engraving for ‘Lights
Only’, ‘Lights and Shades’, or ‘Shades Only’ controls
• If no engraving is specified, wallstations will ship with an engraving certificate, with EGN being its default engraving type.
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
23
Custom seeTouch QS Wallstation Button Functions Summary
Button Configuration
1B 2B 3B 5B 7B 1RLD 2RLD 3BD
EGN (General Engraving) Functionality
Wallstations
369489g 23 05.19.20
Scene 1
Scene 1
Off
Scene 1 Scene 2 Scene 3
Scene 1 Scene 2 Scene 3 Scene 4
Off
Scene 1 Scene 2 Scene 3 Scene 4 Scene 5 Scene 6 Scene 7
Scene 1 Scene 2 Scene 3
Open Close
Scene 1
Off
Open
Close
E01 (Standard Engraving) Functionality
N/A N/A
Open
Close
Open
Preset
Close
Open Preset 1 Preset 2 Preset 3
Close
Group 1 Group 2 Group 3
Open Close
Open Close
Open
Close
E02 (Secondary/Shades Only Engraving) Functionality
N/A N/A N/A N/A N/A N/A N/A
Blackout
Sheer
Both
Scene 1 Scene 2 Scene 3
Open
Preset
Close
Open
Preset
Close
Open
Preset
Close
Legend:
Light Control
Shade Control
Job Name:
Job Number:
Open Close
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
24
How to Build a seeTouch QS Model Number
Button Configurations
Wallstations
369489g 24 05.19.20
1B
1-b utton
2BRL
2-button with
raise / lower
2B
2-button
3BRL
3-button with
raise / lower
3B
3-button
5BRL
5-button with
raise / lower
5B
5-button
2BRLIR
2-button with IR
receiver and
raise / lower
7B
7-butto n
3BRLIR
3-button with IR
receiver and
raise / lower
5BRLIR
5-button with IR
receiver and
raise / lower
Job Name:
Job Number:
1RL D
Dual with 3-button
and 2-button with
raise / lower
2RLD
Dual 2-button with
raise / lower
3BD
Dual 3-button
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
25
369489g 25 05.19.20
Faceplate Information
Faceplate Replacement Kits
Use faceplate replacement kits to change: colors, button configuration, engraving, between insert and non-insert versions. Each kit includes an adapter, button assembly, and wallplate
Non-Insert Kit
Non-insert style controls: Faceplate complements a specified button kit. When the faceplate is removed or replaced, the buttons are removed and replaced along with it.
Insert Kit
Insert style controls: Faceplate is a decorator style with a universal size opening that fits all button kits. This style allows for easy replacements of button kits without changing the faceplate.
Wallstations
Model Numbers for Kits
Non-Insert Insert
QSWS2R-1BN QSWS2R-1BI QSWS2R-2BN QSWS2R-2BI QSWS2R-3BN QSWS2R-3BI QSWS2R-5BN QSWS2R-5BI QSWS2R-7BN QSWS2R-7BI QSWS2R-2BRLN QSWS2R-2BRLI QSWS2R-3BRLN QSWS2R-3BRLI QSWS2R-5BRLN QSWS2R-5BRLI QSWS2R-1RLDN QSWS2R-1RLDI QSWS2R-2RLDN QSWS2R-2RLDI QSWS2R-3BDN QSWS2R-3BDI QSWS2R-2BRLIRN QSWS2R-2BRLIRI QSWS2R-3BRLIRN QSWS2R-3BRLIRI QSWS2R-5BRLIRN QSWS2R-5BRLIRI
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
26
Wallstation Installation
QS Link Wiring
• Use SELV / PELV / NEC wallstations to the QS Link.
• Connect two 22 AWG (0.5 mm pair wires to terminals 3 and 4 of the wallstation’s control link connector. Shielding (drain) of the twisted pair wires must be connected together as shown, but do not connect the shielding to earth / ground or the wallstation and do not allow it to contact the grounded wallbox.
• Connect the appropriate size wires to terminals 1 and 2 for power, according to your link length (see table below).
• Connect drain / shield as shown. Do not connect to ground (earth) or wallstation. Connect the bare drain wires and cut off the outside shield.
Note: Use appropriate wire connecting devices as specified by local codes.
® Class 2 wiring to connect
2
) shielded, twisted
Link Wiring (<500 ft/153 m)
(1) twisted, shielded pair
D: drain / sh ield
(2) 18 AWG (1.0 m m2)
(2) 18 AWG (1.0 m m
2
)
SELV / PELV / NEC® Class 2 Control wiring (2) 18 AWG (1.0 mm2) 1: Common 2: V+
22 AWG (0.5 mm
Data Link:
3: MUX 4: MUX
Wallstations
369489g 26 05.19.20
2
)
4
3
2
1
C
B
A
Back View
Link Wiring (500 ft/153 m to 2000 ft/610 m)
Data Link: (1) twisted, shielded pair 22 AWG (0.5 mm 3: MUX 4: MUX
(2) 12 AWG (4.0 mm
2
)
SELV / PELV / NEC Control wiring (2) 18 AWG (1.0 mm2)
(2) 12 AWG (4.0 mm
2
)
1: Common 2: V+
QS Link Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 500 ft (153 m)
500ft to 2000 ft (153 m to 610 m)
Power (terminals 1 and 2) 1 pair 18 AWG (1.0 mm
Data (terminals 3 and 4) 1 twisted, shielded pair 22 AWG (0.5 mm
Power (terminals 1 and 2) 1 pair 12 AWG (4.0 mm
Data (terminals 3 and 4) 1 twisted, shielded pair 22 AWG (0.5 mm
2
) GRX-CBL-346S (non-plenum)
GRX-PCBL-346S (plenum)
2
)
2
) GRX-CBL-46L (non-plenum)
GRX-PCBL-46L (plenum)
2
)
2
)
4
3
2
1
® Class 2
Job Name:
Job Number:
SPECIFICATION SUBMITTAL Page
Model Numbers:
®
27
Contact Closure Inputs
Wallstations
369489g 27 05.19.20
Specifications
• Inputs must be dry contact closure, solid-state, open collector, or active-low (NPN) / active-high (PNP) output.
– Open collector NPN or active-low on-state
voltage must be less than 2 V- and sink 3.0 mA
– Open collector PNP or active-high on-state
voltage must be greater than 12 V- and source
3.0 mA
• Wallstation is miswire protected up to 36 V-.
• Outputs must stay in the closed or open states for at least 40 msec in order to be recognized by the wallstation.
Contact Closure Input Wiring
• Use low-voltage SELV / PELV / NEC
® Class 2 wiring
to connect the contact closure inputs to the wallstation.
(3) 18 AWG
(1.0 m m2)
Common
Input 2
Input 1
4
3
2
1
C
B
A
Back View
)Lutron, Lutron, GRAFIK Eye, Nova T*, Quantum, Satin Colors, seeTouch, Sivoia, Energi Savr Node, and Vareo are trademarks or registered trademarks of Lutron Electronics
Co., Inc. in the US and/or other countries.
NEC is a registered trademark of National Fire Protection Association, Quincy, Massachusetts.
SPECIFICATION SUBMITTAL Page
Job Name:
Model Numbers:
Job Number:
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use