Page 1
Aqara Hub
User Manual and Warranty
Product description
Aqara Hub is the control center of the smart home devices, it connects all the smart sensors
and controllers through Aqara APP to create and manage a variety of intelligent life scenes.
Aqara Hub functions as night lights, illumination detection, sound and light alarm, ect.
Quick Setup
1. Download Aqara APP
Download Aqara APP in the application store or scan the following QR code.
Model: ZHWG11LM
Page 2
More smart devices info, please visit aqara.com
2. Connect new devices
Plug in the hub, make sure it connects to 2.4GHz Wi-Fi
Open Aqara APP, go to “Device List”, click “+” on the top right to add devices, choose Aqara hub
and follow the instructions.
* Please keep your phone close to the hub for connectivity convenience, and make sure your
phone and hub connect to the same Wi-Fi.
If connection failed, press the button on the hub for 5 seconds until a yellow light blinks to
reconnect the hub.
Follow the instruction in the user manual to add devices after the hub is ready. You can view the
device list under the hub and set up the automation scenes.
Installation
The hub must be placed close to the router, 2 to 6 meters for ideal transmission.
Indicator Light Description
Page 3
Indicator light color
Indicator light status
Quick blink
Slow blink
Yellow light
Reset to factory settings, it
appears in the initial usage or
resetting
Firmware upgrade
Blue light
Wi-Fi is connecting, it
appears when the APP is
connecting the hub, network
is disconnected or the
network is reconnected after
the plug is re-plugged
N/A
Specifications
Model ：ZHWG11LM
Size：80×80×41.5mm
Operating temperature：0 ℃- +40 ℃
Operating humidity：5% - 95%RH，no condensation
Input voltage：100 - 240V~，50Hz/60Hz
Wireless connections：Wi- Fi IEEE 802.11 b/g/n 2.4GHz, ZigBee, NFC
Applicable system：Android 4.4 or above，iOS 8.0 or above
＊This equipment is for indoor use only
＊This equipment is only suitable for safe use in areas below 2,000 meters above sea level
Federal Communications Commission (FCC) compliance statem
ent
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the followi
ng two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may ca
use undesired operation.
2. Changes or modifications not expressly approved by the party responsible for complian
ce could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not install
ed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Page 4
However, there is no guarantee that interference will not occur in a particular installation. I
f this equipment does cause harmful interference to radio or television reception, which c
an be determined by turning the equipment off and on, the user is encouraged to try to co
rrect the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC NOTICE TO CANADIAN USERS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device. This device
complies with RSS-247 of Industry Canada. Operation is subject to the condition that
this device does not cause harmful interference. This Class B digital apparatus
complies with Canadian ICES-003 (Cet appareil numérique de la Classe B conforme
à la norme NMB-003 du Canada).
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement est conforme aux limites IC d'exposition aux radiations définies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé
avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet émetteur
ne doit pas être situé ou opérant en conjonction avec une autre antenne ou émetteu
Important Safety Instructions
Page 5
1. CAUTION : Risk of electric shock, This product is not a toy and not intended for use by
children. For adult use only
2. The maximum ambient temperature during use of the appliance must not exceed 40
C.
3. The appliance is suitable for moderate climates only.
4. The ventilation must not be impaired by covering the appliance with items such as
newspapers, table cloths, curtains, etc.
5. Naked flame sources, such as candles, must not be placed on the appliance.
6. The appliance does not require much attention. If you want to clean it, please use only dry
cloths or a brush.
7. Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus completely, the main plug should be
disconnected from the main socket outlet completely.
Loading...