Lumi United Technology MCCGQ11LM Users manual

1

The Door and Window Sensor User’s Manual

Introduce

Aqara’s Door/Window Sensor (DWS) is a smart device featuring low power

consumption, small size, and cost-efficiency, utilizing the ZigBee© wireless protocol. It is

powered by a CR1632 battery, and complies with ZigBee’s HA1.2 (Home Automation)

standard. The DWS communicates with the Aqara multi-functional gateway.

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:
(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may

cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20cm
between the radiator & your body.

Parameter

Product Model: MCCGQ11LM
Product Size: 41x22x11mm
Battery Type: CR1632
Detect Range :~22 mm

Operation Temperature:- 10℃－+ 50℃

2

Operation Humidity: 0－95% RH，No Condensation
Execution standard: Q/QLML003－2015

Installation Method:

Effective distance validation: Click the reset button on the OS sensor in selected sensor

installation location, it will be effective communication between device and gateway if the

gateway to prompt.
Step 1: Tear off glue stick protective film
Step 2: Please align install tags

Step 3: Paste respectively on the door or window (advice body fixed installed in opening

and closing area surface, magnet installed in active surface, installation clearance under

the Windows and doors closed less than 22 mm).Please make sure this equipment

installed and operated with minimum distance 20cm between your body.

*The surface of the paste must be kept clean and dry
*Please avoid falls when installation, easy to damage the sensor body.

Step 4: After connected with the gateway, you can monitoring the status of doors and

windows through the APP.