Lumiscope 109-232 CUFF User Manual

Large Adult Cuff
Model #109-232

Instructions for Use

1. Remove the connector by pulling it out of the original air tube included
with your blood pressure monitor (for automatic blood pressure monitors
only). To facilitate removal, run the tube and air connector under warm
water to loosen the connection.
Note: The connector fits snugly in the air tube and may require extra effort

when pulling it out. (Do NOT cut the connector from the tube or try to pull
the connector out with your teeth.)

2. Place the connector in the open end of the Large Adult Cuff air tube.

3. Connect the cuff tube to the monitor and refer to the instruction manual
included with your blood pressure monitor to continue your measurement.

Distributed by:
The Lumiscope Company, Inc.
122 Tices Lane
East Brunswick, NJ 08816
www.lumiscope.net
E-mail: [e-mail]

Made and Printed in China