DJI M210 PWM for DL series Manual v.1.1
Page 1 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
USER MANUAL
HOW TO USE PWM ON DJI M210 TO
CONTROL DL A
Thank you very much for choosing the DL Series drone lights, and congratulations with your new product. We hope
that you will enjoy it and that it will serve you in whatever you use it for. Please feel free to contact us for any
types of feedback.
GENERAL INFORMATIO N
The DL Series is created to push limits and maximize the potential in LED
technology and optical performance. DL A is developed with focus on high light
performance, low weight and smart control functions. This manual shows how to
connect the DJI M210 DL Kit and how to control the DL A using DJI M210 Extended
Power Port and PWM signals.
DJI M210 PWM for DL series Manual v.1.1
Page 2 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
CONNECTING
On the back side of the drone, there is a little plastic lid; open it to access the power and PWM connectors.
Connect the XT30 plug on the cable harness, and the PWM plug in Port 1. (counts from the right side)
DJI M210 PWM for DL series Manual v.1.1
Page 3 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
EXTENDED IO OP TIONS TO CONTROL POW ER POR T AND PWM
Push the settings button in upper right corner.
Push “Extended IO Options”
DJI M210 PWM for DL series Manual v.1.1
Page 4 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
SWITCH ON/OFF EX TEN DED IO
To activate the PWM, switch on the Extended IO Switch.
This switch can be used to turn the lights on/off without PWM.
DJI M210 PWM for DL series Manual v.1.1
Page 5 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
PWM SETTINGS
Push the arrow to the righ of “Port 1”.
Push PWM
DJI M210 PWM for DL series Manual v.1.1
Page 6 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
Frequency: 50
Duty Ratio controls the light intensity. The minimum is 56 and the maximum is 120
To adjust the light intensity, type in a number between 56 and 120.
To change the ligh intensity, repeat this procedure.
Loading...