Page 1
VS-KB21/ VS-KB21N
Keyboard controller
(Keyboard Controller)
User Manual – English
Ver. VYI101
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
https://www.MyLumens.com/support
Page 2
English - 1
Contents
Copyright Information ................................................................................................................................................... 2
Chapter 1 Safety Instructions .................................................................................................................................... 3
Chapter 2 Product Overview ...................................................................................................................................... 4
2.1 I/O Introduction .................................................................................................................................................... 4
2.2 Panel function introduction .................................................................................................................................. 5
2.3 LCD screen display description ........................................................................................................................... 6
Chapter 3 LCD function menu description ............................................................................................................... 7
Chapter 4 Camera connection ................................................................................................................................. 10
4.1 Port pin definition ............................................................................................................................................... 10
4.2 How to Connect RS-232 .................................................................................................................................... 10
4.3 How to Connect RS-422 .................................................................................................................................... 11
4.4 How to Connect IP ............................................................................................................................................. 11
Chapter 5 Web Interface ........................................................................................................................................... 13
5.1 Connecting Camera to Network ........................................................................................................................ 13
5.2 Web Login.......................................................................................................................... 錯誤! 尚未定義書籤。
5.3 Web Page Functions ......................................................................................................................................... 14
Chapter 6 Common Functions ................................................................................................................................. 21
6.1 Call the camera ................................................................................................................................................. 21
6.2 Setup/call/cancel preset position. ...................................................................................................................... 21
6.3 Set the camera OSD menu via the keyboard .................................................................................................... 22
Chapter 7 Troubleshooting ...................................................................................................................................... 23
Page 3
English - 2
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc.
unless copying this file is for the purpose of backup after purchasing this product.
In order to keep improving this product, Lumens Digital Optics Inc. hereby reserves the right to make changes to
product specifications without prior notice. The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may refer to names of other products or
companies without any intention of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible technological, editorial
errors or omissions, nor responsible for any incidental or related damages arising from providing this file, using, or
operating this product.
Page 4
English - 3
Chapter 1 Safety Instructions
Always follow these safety instructions when setting up and using this product:
1. Use attachments only as recommended.
2. Use the type of power source indicated on the Keyboard Controller. If you are not sure of the type of power
available, consult your distributor or local electricity company for advice.
3. Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
4. Do not overload wall sockets, extension cords or multi-way plug boards as this may cause fire or electric shock.
5. Do not place this product where the cord can be stepped on as this may result in fraying or damage to the lead or
the plug.
6. Never allow liquid of any kind to spill into this product.
7. Except as specifically instructed in this User Manual, do not attempt to operate this product by yourself. Opening
or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
8. Unplug this product during thunderstorms or if it is not going to be used for an extended period. Do not place this
product or remote control on top of vibrating equipment or heated objects such as a car, etc.
9. Unplug this product from the wall outlet and refer servicing to licensed service personnel when the following
situations happen:
If the power cord or plug becomes damaged or frayed.
If liquid is spilled into this product or this product has been exposed to rain or water.
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
If the this product will not be used for an extended time, unplug it from the power socket.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service personnel.
This symbol indicates that
this equipment may contain
dangerous voltage which
could cause electric shock.
This symbol indicates that
there are important
operating and maintenance
instructions in this User
Manual with this unit.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice :
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This product has been tested and found to comply with the limits for a Class B computer device, pursuant to Article
15-J of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
commercial installation.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard
entitled “Digital Apparatus,” ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe
B prescrites dans la norme sur le material brouilleur: “Appareils Numeriques,” NMB-003 edictee par l’Industrie.
Caution
Risk of Electric Shock
Please do not open it by yourself.
Page 5
English - 4
Chapter 2 Product Overview
2.1 I/O Introduction
No
Item
Function Descriptions
1
RS-422 port
Connect the RS-422 adapter cable that can control up to 7 cameras
2
RS-232 port
Connect the RS-232 adapter cable that can control up to 7 cameras
3
USB port
Update the keyboard control firmware via a USB disk
Use format “FAT32”, “capacity less than 32G”
4
IP port
Connect the RJ45 network cable
Supports PoE(IEEE802.3af)
5
12 V DC power port
Connect the included DC power supply adapter and the power cable
6
Power Button
Turn on/off keyboard power
7
Safety lock
Use the safety lock to lock the keyboard for anti-theft purpose
RS-232/ RS-422 port do not support POE. Please do not connect with POE Switch
1 2 3 4 5 6 7
Page 6
English - 5
2.2 Panel function introduction
No
Item
Function Descriptions
1
WB
Automatic/manual white balance switch
When the setting is automatic white balance, the AUTO indicator will turn on
2
ONE PUSH WB
One push white balance
3
EXPOSURE
Auto, Iris PRI, Shutter PRI
4
BACKLIGHT
Turn on/off back light compensation
5
LOCK
Lock the control of all image adjustment and rotary buttons
Press and hold for 3 seconds to enable the lock; press and hold for 3 seconds
again to cancel the lock
6
SEARCH
Search or add the camera IP setting
7
CAM LIST
Check the currently connected camera
8
LCD screen
Display control and setting information of the keyboard
9
CAM MENU
Call the camera OSD menu
10
SETTING
Enter the settings menu
11
BACK
Back to the previous step
12
R/B GAIN
Adjust the white balance in red/blue manually
13
IRIS / SHUTTER
Adjust the aperture or shutter
14
P/T/Z SPEED
Rotate: Adjust/control the speed
Press: Switch between P/T or Z
15
ZOOM SEESAW
Control ZOOM in/out
16
FOCUS CONTROL
Rotate the knob to adjust NEAR/FAR parameters (for Manual Focus use only)
Press to execute One Push Focus
LCD menu: Rotate left/right to adjust parameters and navigate the menu
LCD menu: Press to select an item
17
AUTO FOCUS
Automatic/manual focus switch
When the setting is automatic focus, the AUTO indicator will turn on
18
CAMERA BUTTON
CAM1~CAM7
Quickly select Camera 1 ~ 7 and control the camera within 1 second
Press and hold for 3 seconds to access the shortcut key settings page
19
Assign Button F1~F2
Set up the shortcut key to quickly control the camera
20
PVW
Press to display the camera’s RTSP streaming video
21
CALL
Press number button to call a camera preset position
22
SAVE
Press number button to save a camera preset position
23
CAM
Press number button to select the specific camera (Cam 1 - 255)
Page 7
English - 6
No
Item
Function Descriptions
24
Letter and number
keyboard 0 ~ 7
CALL a camera; call a preset position; key in the camera name (LCD menu)
25
DELETE
Control LCD menu to execute “delete” action
26
ENTER
Control LCD menu to execute “confirm” action
27
PTZ joystick
Control the camera PTZ operation
2.3 LCD screen display description
No
Item
Function Descriptions
1
Camera ID and protocol
Display the camera currently under control and the protocol currently in use
2
EXPOSURE MODE
Display the current camera exposure mode
3
Connected device
parameter information
Display the current camera parameter information
4
Network connection
indication status
If the play icon appears, the camera’s RTSP streaming video can be displayed
Page 8
English - 7
Chapter 3 LCD function menu description
3.1 Access LCD function menu
Press the SETTING button on the keyboard to access the LCD function menu
3.2 Hot Key Camera
Item
Settings
Description
CAM
1~7
Assign the camera number; 7 units can be set at most
Advanced settings for Hot Key Camera
Item
Settings
Description
Alias
-
The camera can be named using letters on the keyboard
Protocol
VISCA
VISCAIP
VISCATCP
ONVIF
NDI
Select a control protocol to be used for connecting the camera
Only VS-KB21N support NDI.
Address
1~7
Set VISCA ID from 1 to 7
Baudrate
9600 / 19200 /
38400 / 115200
Set control Baudrate
Stream URL
rtsp://cam
ip:8557/h264
Can be automatically imported based on added models
RTSP
Authentication
Off/On
Select to enable RTSP Authentication function
User Name
admin
Automatically import account and password, shown by User name.
Password
9999
Automatically import account and password, shown by *****
Select from List
-
Select a specific camera from the CAM List and apply it automatically
3.3 Device Management
Item
Settings
Description
Device List
-
View the current device list
Add a New List
-
Add a new device
Ignored Device
List
-
View the current list of ignored devices
Add an Ignored
Device
-
Add an ignored device
3.4 Network
Item
Settings
Description
Type
STATIC / DHCP
Specify a static IP or let DHCP to assign an IP to the keyboard
IP Address
192.168.0.100
For a static IP, specify the IP address in this field
(Default IP is 192.168.0.100)
Subnet Mask
255.255.255.0
For a static IP, specify the subnet mask in this field
Gateway
192.168.0.1
For a static IP, specify the gateway in this field
Page 9
English - 8
DNS 1
192.168.0.1
Set DNS 1 information
DNS 2
8.8.8.8
Set DNS 2 information
3.5 KEYS
Item
Settings
Description
F1 ~ F2
None
Home
Power
Mute
Picture Freeze
Picture Flip
Picture
LR_Reverse
Tracking Mode
Framing Mode
Auto Tracking On
Auto Tracking Off
Auto Framing On
Auto Framing Off
D-Zoom On
D-Zoom Off
Group
Custom
Commands
F1 ~ F2 buttons can be set as shortcut keys separately
Functions may be set as the list displayed to the left
After selecting Function, choose the target function
Press the shortcut key and the camera will perform the specified function
quickly
3.6 Display
3.7 Beep
Item
Settings
Description
Enable
Off / On
Turn on or off button sound effects
Style
1 / 2 / 3
Select the button sound type
Item
Settings
Description
Theme Color
Red
Green
Blue
Orange
Purple
Adjust LCD theme color
Brightness
Low
Medium
High
Adjust keyboard brightness
Key Brightness
Low
Medium
High
Adjust key brightness
Page 10
English - 9
3.8 Joystick
Item
Settings
Description
Zoom Enable
On / Off
Enable/Disable the Joystick control for Zoom
Pan Reverse
On / Off
Enable/Disable the horizontal inversion
Tilt Reverse
On / Off
Enable/Disable the vertical inversion
Correction
-
Correct the Joystick direction
3.9 Tally
Item
Settings
Description
Enable
ON / OFF
Enable the Tally light
3.10 Language
Item
Description
English / Simplified Chinese /
Traditional Chinese
Language setting
3.11 Password Setting
Item
Settings
Description
Enable
ON / OFF
Once enabled, you need to enter a password when entering SETTINGS
Change Password
-
Set up a new password
3.12 Sleep Mode
Item
Settings
Description
Enable
ON / OFF
Enable the sleep mode
Goes to Sleep after
15 Mins / 30 Mins
/ 60 Mins
Set the sleep mode activation time
Lightness change
LCD Screen Light
Keypad Backlight
Set the sleep mode preview screen and keyboard brightness
3.13 About Device
Item
Description
-
Display device information
3.14 Reset Device
Item
Settings
Description
Reset Setting
ON / OFF
Remain the keyboard network and CAM LIST, restore other settings to
default values
Reset Setting and
Data
ON / OFF
Clear all keyboard settings, including IP setting
Page 11
English - 10
Chapter 4 Camera connection
VS-KB21/ VS-KB21N supports RS-232, RS-422 and IP control.
Supported control protocols include: VISCA, VISCA over IP
4.1 Port pin definition
4.2 How to Connect RS-232
1. Please refer to the RJ-45 to RS-232 and camera Mini Din RS-232 pin definitions to complete the cable
connection
This is compatible with Lumens optional accessory VC-AC07, which can be connected via
network cable.
2. Camera settings
Protocol set to VISCA
Control Port set to RS-232
3. Keyboard settings
Press [SETTING] and select [Hot Key Camera]
Select CAM1~7
Configure the camera information.
Protocol set to VISCA
Press [Back] exit
RJ45 to RS-232 /
The 1st
Camera
The 2nd
Camera
The 7th
Camera
Page 12
English - 11
4.3 How to Connect RS-422
1. Please refer to the RJ-45 to RS-422 and camera RS-422 pin definitions to complete the cable
connection
2. Camera settings
Protocol set to VISCA
Control Port set to RS-422
3. Keyboard settings
Press [SETTING] and select [Hot Key Camera]
Select CAM1~7
Configure the camera information.
Protocol set to VISCA
Press [Back] exit
4.4 How to Connect IP
1. Use network cables to connect keyboard and IP camera to the router
2. Set keyboard IP address
Press [SETTING], select [Network]
Type: Select STATIC or DHCP
IP Address: If select STATIC, use Focus Near/Far to choose the location, input the IP address via
numbers on the keyboard. Last, press ENTER to save and exit
3. Add a camera
1. Automatic Search
RJ45 to RS-422
The 1st
Camera
The 2nd
Camera
The 7th
Camera
Camera
Cat5 network cable
Cat5 network cable
Cat5 network cable
Cat5 network cable
Page 13
English - 12
Only VS-KB21N support NDI
Press [SEARCH] and select search mode
Select the target camera and set the camera information
Click [Save] at the bottom and you can check the saved camera at [CAM List]
2. Manual Add
Press [SETTING]> [Device Management]
Add new camera to configure the camera information.
Select Protocol VISCAIP/ONVIF, and set the camera IP address
Press SAVE at the bottom to save
Page 14
English - 13
Chapter 5 Web Interface
5.1 Connecting Camera to Network
Please find the two common connection methods below
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the keyboard and PC should be changed to
set at the same network segment
5.2 Web Login
1. Open the browser, and enter the IP address of the keyboard in the address bar
2. Enter administrator’s account and password
For the first-time login, please refer to 5.3.8 System- User Management to change the default
password
Lumens Keyboard Controller
User Name：admin
Password：9999(預設)
PC
Keyboard
Cat5e cable
Keyboard
Switch or Router
PC
Cat5e cable
Cat5e cable
Page 15
English - 14
5.3 Web Page Functions
5.3.1 Login page
No
Item
Description
1
User Name
Enter user login account (default: admin)
2
User Password
Enter user password (default: 9999)
For the first-time login, please refer to 5.3.8 System- User
Management to change the default password
3
Remember Me
Save user name and password.
4
Language
Supporting English/Traditional Chinese/Simplified Chinese
5
Login
Log in to the administrator screen on the website
5.3.2 Hot Key
No
Item
Description
○
1
○
2
○3
○4
○
5
○
1
○
2
Page 16
English - 15
1
CAM1~7
Support hot key camera 1~7
2
Setting page
Click to open the settings page.
Following settings can be configured depending on the protocols.
2.1
VISCA
Alias: Edit camera name
Address: Set the address.
Baudrate: Set the Baudrate
Set Camera Address: When cameras are connected daisy chain, you
can set camera address. This action will send “address set” command
to the camera.
2.2
VISCA Over IP
Alias: Edit camera name
IP Address: Enter IP address
Stream URL: Display the stream URL
RTSP Auth: Enable/ Disable RTSP authentication
User Name: Name for RTSP Auth
Password: Password for RTSP Auth
2.3
VISCA TCP
Alias: Edit camera name
IP Address: Enter IP address
Port: Setting range 1~65534
Page 17
English - 16
Stream URL: Display the stream URL
RTSP Auth: Enable/ Disable RTSP authentication
User Name: Name for RTSP Auth
Password: Password for RTSP Auth
2.4
ONVIF
Alias: Edit camera name
IP Address: Enter IP address
Account: Enable/ Disable ONVIF account. Support to preview(PVW)
camera image when it enabled.
User Name: Name for ONVIF account
Password: Password for ONVIF account
RTSP Auth: Enable/ Disable RTSP authentication
User Name: Name for RTSP Auth
Password: Password for RTSP Auth
Page 18
English - 17
5.3.3 Device Management
5.3.4 Custom Command
No
Item
Description
1
Device List
Display the device list, and click on a device to edit.
2
Ignored List
Display the ignored list, and click on a device to edit.
3
+ Add
Device List: According to the protocols, enter related information to add a
camera.
Ignored List : Enter the IP address and protocol to add camera.
If the camera is with NDI protocol, the [Add] function is not
supported.
Description
Supports 3 customized command.
Click on the command to open the editing page for customizing commands.
○
1
○
2
○3
Page 19
English - 18
5.3.5 Network
5.3.6 Firmware Update
Description
Keyboard controller network settings. When the DHCP function is disabled, Network settings can be edited.
Description
Display the current firmware version. User can upload a file to update the firmware.
Update process takes approximately 3 minutes
Do not operate or power off the device during the update to prevent firmware update failure.
Page 20
English - 19
5.3.7 System- Configuration File
5.3.8 System-User Management
Description
Save the configuration as a file. User can import/ export the configuration file.
Description
Add/ Edit/ Delete user account
The default administrator cannot be deleted.
Support up to 8 user accounts (administrator + common users).
Supporting 4 - 32 characters for user name and password
Characters should be English letters or numbers. Chinese and special symbols are not allowed.
User permissions:
Type
Admin
Common
Language
V
V
Web settings
V
X
User Management
V
X
Page 21
English - 20
5.3.9 About
Description
Display device firmware version, serial number, and related information. For technical support, please scan
the QRcode at the bottom right for assistance
Page 22
English - 21
Chapter 6 Common Functions
6.1 Call the camera
6.1.1 Use the number keyboard to call the camera
1. Key in the camera number to be called via the keyboard
2. Press the “CAM” button
6.2 Setup/call/cancel preset position.
6.2.1 Save the preset position
1. Relocate the camera to the desired position
2. Enter the desired preset position number, then press the SAVE button to save
6.2.2 Call the preset position
1. Key in the desired preset position number via keyboard
2. Press “CALL” button
Page 23
English - 22
6.3 Set the camera OSD menu via the keyboard
1. Press the “CAM MENU” button on the keyboard
2. Set the camera OSD menu via the PTZ joystick
Move the joystick up and down. Switch the menu items/Tune the parameter values
Move the joystick to the right: Enter
Move the joystick to the left: Exit
Page 24
English - 23
Chapter 7 Troubleshooting
This Chapter describes questions frequently asked during the use of VS-KB21/ VS-KB21N and suggests methods and
solutions.
No.
Problems
Solutions
1
After plugging in the power
supply, VS-KB21/ VS-KB21N
power is not on
1. Please check whether the power button on the back is pressed down
correctly
2. If POE is used, please make sure the Ethernet network cable is correctly
connected to the power port of the POE switch
2
VS-KB21/ VS-KB21N can’t
control the camera through
RS-232/ RS-422
1. Please confirm the port pin connection is correct (RS-232/422)
2. Please confirm if the camera OSD is correctly switched to RS-232/RS-422
and the baud rate setting is the same as the controller.
3. Please confirm whether the MENU button on the keyboard is pressed
down by mistake, causing the camera OSD menu to open and the camera
unable to be controlled
3
Cannot use the keyboard
buttons to change the image
settings or focus
Please confirm the LOCK button is set in “LOCK” mode
※For questions about the installation, please scan the following QR Code. A support person will be assigned to assist
you
Loading...